Search results for "sapiro" - lists.mailman3.org

[MM3-users] Re: Fresh installation mailman3-suite via "pipx" - any experiences yet?

by Mark Sapiro

On 1/26/24 07:06, Stephen J. Turnbull wrote: > > I'm pretty sure it will install dependencies. I think (everything I > say below is based on reading the README.md from pipx's pypa.io repo, > so caveat installer) that the complexity that will arise is that (for > example) a naive approach like > > $ pipx install mailman > $ pipx install mailmanweb > $ pipx install postorius > $ pipx install hyperkitty > > will create 4 separate venvs with 3 copies of mailmanclient, 3 copies > of django-mailman3, and two copies of Django. But postorius and hyperkitty are dependencies of mailmanweb so only $ pipx install mailman $ pipx install mailmanweb should be required. This should put core in one venv and everything else in another without redundancy. > Besides the space > waste, there's also the small problem that mailmanweb won't have copies > of postorius and hyperkitty in its venv. But it will because they are dependencies of mailmanweb. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

2 years, 4 months

[MM3-users] Re: Recipient address rejected: User unknown in local recipient table

by Mark Sapiro

On 8/19/24 16:24, eyoelz--- via Mailman-users wrote: > Error: > Aug 19 15:06:10 xxx-rocky9 postfix/smtpd[153746]: NOQUEUE: reject: RCPT from xxxx.xxxxxx-xx.iphmx.com[xx.x.xx.xxx]: 550 5.1.1 <devops(a)xxx.xxx.edu>: Recipient address rejected: User unknown in local recipient table; from=<xxx(a)xxxx.edu> to=<xxx(a)xx.xx.edu> proto=ESMTP helo=<xx.xx-xx.iphmx.com> Is xx.xx.edu in to=<xxx(a)xx.xx.edu> The same as > main.cf > smtpd_relay_restrictions = permit_mynetworks permit_sasl_authenticated defer_unauth_destination > myhostname = xxx.xxx.edu xxx.xxx.edu in myhostname? > alias_maps = hash:/etc/aliases > alias_database = hash:/etc/aliases > mydestination = $myhostname, mailman, localhost.localdomain, , localhost > relayhost = [xx.xx.xx.xx] > mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 > recipient_delimiter = + > inet_interfaces = all > inet_protocols = all > transport_maps = hash:/opt/mailman/mm/var/data/postfix_lmtp What is the content of postfix_lmtp? In particular is there an entry for xxx(a)xx.xx.edu? > local_recipient_maps =$alias_maps hash:/opt/mailman/mm/var/data/postfix_lmtp > relay_domains = hash:/opt/mailman/mm/var/data/postfix_domains Is this the complete main.cf? -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

1 year, 9 months

[MM3-users] Re: Footer variables

by Mark Sapiro

On 3/2/26 10:13, Washington Odhiambo via Mailman-users wrote: > > I will have to check the mailman.log. What should I look for? > Right now it looks so clean - without anything to worry about. I'm assuming the list's active archivers includes hyperkitty and that messages are archived there and messages from the list contain an appropriate Archived-AT: header. Is all that correct? Are there `Exception in "hyperkitty" archiver` messages in mailman.log, or if you have set a path: in the [logging.archiver] section of mailman.cfg, in that file? You could try in `mailman shell` ``` $ mailman shell -l list.example.com Welcome to the GNU Mailman shell Use commit() to commit changes. Use abort() to discard changes since the last commit. Exit with ctrl+D does an implicit commit() but exit() does not. The variable 'm' is the list.example.com mailing list >>> for archiver in IListArchiverSet(m).archivers: ... if archiver.system_archiver.name == 'hyperkitty': ... print(f'Enabled: {archiver.is_enabled}') ... Enabled: True >>> ``` and see if it prints `Enabled: True`. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

3 months, 3 weeks

[MM3-users] Re: Domain in welcome message

by Mark Sapiro

On 02/19/2017 02:05 PM, Maadix wrote: > Hi, > I'm having problems with customizing welcome message > > It's working fine for > var/templates/site/en/welcome.txt > > but not for domains or lists , so maybe I'm doing something worng > > I'm using a subdomain as mail_host which is different from the URL Host. > > I've been trying all these combination, with no success: > > var/templates/domains/sub.example.com/en/welcome.txt > var/templates/lists/listname.sub.example.com/en/welcome.txt > var/templates/lists/listname(a)sub.example.com/en/welcome.txt > > I'm running mailman-bundler version 3.0.0 Templating has changed for MM 3.1, and I don't have a 3.0 platform available for testing, but as far as I can recall, the paths var/templates/domains/sub.example.com/en/welcome.txt and var/templates/lists/listname.sub.example.com/en/welcome.txt should be valid for domain and list specific templates and the precedence should be (high to low) list, domain, site, default. I don't know why it isn't working for you. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

9 years, 4 months

[MM3-users] Re: leaving Sympa for MM3

by Mark Sapiro

On 2/20/20 3:12 PM, rance.hall(a)esu10.org wrote: > > Now for the question/hard part. Migrating list archives. > > In Sympa the list archive is just a maildir format directory structure reflecting month/year. In MM3 the Archive is stored in the db with attributes that are likely only available as the message is processed. > > I'd really rather not loose the archive data if I can help it. Does anyone have any thoughts on how I could perhaps import this? It shouldn't be hard. HyperKitty has a function to import archive mbox files. It would be a simple matter to use Python's mailbox module to convert your archive. Something like import mailbox md = mailbox.Maildir('path/to/maildir/directory', create=False) mb = mailbox.mbox('path/to/mbox', create=True) for msg in md: mb.add(msg) mb.close() md.close() Then just run hyperkitty_import to import the mbox. run something like django-admin hyperkitty_import --help for details. Note that if there are already archived messages you need to specify --since to import older messages. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

6 years, 4 months

[MM3-users] Re: New releases

by Mark Sapiro

On 9/11/20 8:19 PM, brylon(a)oit.rutgers.edu wrote: > I already have ruby-sass installed and the compress command used to work as expected prior to my upgrading to the latest core, postorius, hyperkitty versions using pip in my venv. > > Does It matter at all when performing the Django-admin commands whether I've activated the venv or not? I think I've tried running them both activated and deactivated to no avail, but any other suggestions? I don't think that's the issue here, but the venv should be active when you run the Django-admin commands. Looking more closely at the error, I see it says ``` File "/opt/mailman/mm/venv/lib/python3.6/site-packages/compressor/base.py", line 282, in precompile mod = import_module(mod_name) ... ModuleNotFoundError: No module named 'sass -t compressed {infile} {outfile}' ``` Thus it appears that compressor is trying to import 'sass -t compressed {infile} {outfile}' as a module instead of executing it as a command. What version of compressor is this? It is working for me on 4 sites with django_compressor-2.4, django_compressor-2.3 and django_compressor-2.2. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

5 years, 9 months

[MM3-users] Re: spanish localization

by Mark Sapiro

On 2/13/21 2:33 AM, Guillermo Hernandez (Oldno7) via Mailman-users wrote: > > But... here is a thing that I can not understand: If the source (the .po > file) is from november 7th, it doesn't matter how many times you > recompile it: the result will be the same. Correct, but the point is if you download the latest gnu-mailman-mailman-es.po from weblate, and compare it to the Nov 7 file in the distribution, you will find they are identical, so it it appears that the weblate translation hasn't changed since that time. If there are issues in this mailman.po, they exist in weblate too and need to be fixed there. Also note that the translations on weblate only affect strings in the core code. The Mailman core templates are not currently translated in weblate and there are currently no Spanish language templates. One would need to create Spanish translations of all the templates in <https://gitlab.com/mailman/mailman/-/tree/master/src/mailman/templates/en> and submit a merge request to add them to a mailman/templates/es/ directory. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

5 years, 4 months

[MM3-users] Re: bounces with empty message-id

by Mark Sapiro

On 01/31/2018 11:57 AM, Peter Münster wrote: > On Wed, Jan 31 2018, Mark Sapiro wrote: > >>> I have verp_delivery_interval = 10 ... >> >> Which says only every 10th message will be VERPed. You want >> verp_delivery_interval = 1 to VERP every message. > > Hi, > > Why? The smtp relay host would get much more outgoing messages. With > verp_delivery_interval = 10, only 10% of the messages would be > personalized. Shouldn't this be enough to detect sooner or later, that a > recipient address is no more valid? Or is it important, to detect such > failure immediately? Yes, VERP does increase the number of SMTP transactions to deliver the mail from mailman to the outgoing MTA, but in general it has mush less effect on deliveries from the outgoing MTA to the recipient MXs, but with modern hardware, most people seem to find the added overhead of VERP to be minimal. Also, it is possible to have the MTA do the VERPing rather than Mailman. See <https://bugs.launchpad.net/mailman/+bug/558067> for a way to do this in Mailman 2.1. There's nothing for Mailman 3, but all that's needed is to configure Postfix to do it and add an appropriate mail_options= to the smtplib.SMTP.sendmail() calls to enable it. In any case, consider (assuming automated bounce processing is working, which it currently isn't) a list with bounce_info_stale_after = 7 days that gets even a post per day and has a member who is bouncing with a DSN that can't be successfully parsed for the member address (maybe because the bounce is from a forward to a different address) so only a VERPed bounce will be successfully scored. At some point a VERPed post bounces for this member and the member gets a bounce score of 1. Now, the next 9 posts to this list will not be VERPed and by the time the 10th post bounces it's more than a week since the first bounce and the score is reset so this member's delivery is never disabled. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

8 years, 4 months

[MM3-users] Re: Problem with redirection when entering alias without a / at the end

by Mark Sapiro

On 3/19/21 2:55 PM, Jens Günther wrote: > > When I want to get to Mailman Starting Page now I need to Enter the > following URL: https://mailman.xyz.de/mailman3/ to be directly > redirected as expected to > https://mailman.xyz.de/mailman3/postorius/lists/ -> works. > > Problem: When leave out the slash at the end and I ONLY enter the > following URL: https://mailman.xyz.de/mailman3 -> then I'm wrongly > redirected to a page, taht does not exist: > https://mailman.xyz.de/mailman/postorius/lists/ -> 404 Huh? that is the same URL as the one above that you say works. Do you mean https://mailman.xyz.de/mailman/postorius/lists without the slash or what. > Where can I change this misbehaviour? In Apache-conf everything seems as > it'S in the docs, for the vHost I do not have any other custom settings. What is the exact content of your RedirectMatch or ReweriteRule or whatebver you are using? -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

5 years, 3 months

[MM3-users] Re: Mailman archive issues (Hyperkitty)

by Mark Sapiro

On 6/7/21 11:54 PM, Kimmo L wrote: > Hi! > > Thanks for the support and help! > But so far i havent been successful with upgrading my postorius, hyperkitty and django pip packages from python2.7 to python3.5 or higher. As i understand, it was installed 2018 and has not been updated (because it has been working without any problem). Perhaps we can help with that. How are these installed now? What issues are you having when trying to upgrade. > Maybe the easiest way is to create a new deployment and somehow transfer data from old server to new one ? It's up to you which way to go. If you create a new deployment, I recommend following https://docs.mailman3.org/en/latest/install/virtualenv.html. You might also consider Xapian as the search engine - see https://docs.mailman3.org/en/latest/config-web.html#enable-full-text-search… and https://github.com/notanumber/xapian-haystack/tree/master Transferring the data is easy as long as the database is compatible - just dump and load, plus copy some files from Mailman's var/ directory. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

5 years

Search results for query "sapiro"