Search results for "sapiro" - lists.mailman3.org

[MM3-users] Re: Linking to a forum thread from a (news) website.

by Mark Sapiro

On 9/25/19 2:29 AM, Paul Arenson wrote: > SOLUTION > I figured out that all replies are listed under Re:, so if the first comment does not have the Re:, then it gets cut off. ... > QUESTION > Am I correct that if I want to create a thread and link to it, but make sure the first note is included, I need to make the thread title: Re: Something? Re: has nothing to do with it. Replies are not threaded by subject. Replies are threaded by In-Reply-To: and References: headers in the reply. These headers are generated by the sending MUA (mail client) when replying to a message. If you send a 'new' message without those headers, it will be a new thread regardless of whether or not the Subject: matches with or without the Re:. Also, there are broken MUAs that don't properly generate In-Reply-To: and References: headers and replies from these MUAs will never be properly threaded. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

6 years, 8 months

[MM3-users] Re: Cannot start lmtp runner due to error while attempting to bind on address ('127.0.0.1', 8024): address already in use

by Mark Sapiro

On 12/2/19 5:04 AM, actionmystique(a)gmail.com wrote: > > Of course the port is already in use: it is used by dovecot. > ``` > tcp6 0 0 ::1:8024 :::* LISTEN 0 1317360 129620/dovecot > tcp 0 0 127.0.0.1:8024 0.0.0.0:* LISTEN 0 1316324 129620/dovecot > ``` > I must be missing something. What is Dovecot listening for on the lmtp port? If this is Postfix communicating with Dovecot as the LDA or for address verification and using TCP port 8024, you have at least two choices. You can have Postfix/Dovecot communicate via a unix socket instead or you can configure Mailman to use a different port. See <https://mailman.readthedocs.io/en/latest/src/mailman/docs/mta.html> which says in part: lmtp_port is fairly arbitrary (there is no standard port for LMTP). Use any port convenient for your site. “8024” is as good as any, unless another service is using it. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

6 years, 6 months

[MM3-users] Re: Aborted connection message in log in every 5 minutes

by Mark Sapiro

On 1/30/24 10:46, andrea.janna.unipd(a)gmail.com wrote: > Same issue at my site. > I'm using mailman3 3.3.8 shipped with Debian 12. Then your first line of support should be Debian. See <https://wiki.list.org/x/12812344> > To debug the problem I stopped apache, cron, postfix and mailman3-web services. > But I still get the mariadb aborted connection warnings every 5 minutes. The only thing that runs every 5 minutes is `mailman gatenews`. The issue may be with that. You could try running it manually via ``` _MAILMAN_GATENEWS_NNTP=yes;sudo -u list mailman gatenews ``` ... > The regular mailman log doesn't show anything and I'm not sure about how to enable an appropriate debug log for mailman. Mailman has a number of virtual logs, most of which are written to the file mailman.log. You can enable debug level for those with ``` [logging.template] level:debug ``` See <https://gitlab.com/mailman/mailman/-/blob/master/src/mailman/config/schema.…> for more info on logging. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

2 years, 4 months

[MM3-users] Re: Trouble Installing Mailman3

by Mark Sapiro

On 6/3/25 08:22, Henry Hartley via Mailman-users wrote: > > (venv) mailman@wz-prd-tpmd-1:~$ pip -v --trusted-host pypi.org install wheel mailman psycopg2-binary > Using pip 24.0 from /opt/mailman/venv/lib/python3.12/site-packages/pip (python 3.12) > ERROR: Could not find a version that satisfies the requirement wheel (from versions: none) > ERROR: No matching distribution found for wheel > > The same error shows up if I try to install just mailman or psycopg2-binary, except the word "wheel" is replace with whichever package I've requested. I don't understand why this is occurring. All those packages exist in pypi.org https://pypi.org/project/wheel/ https://pypi.org/project/mailman/ https://pypi.org/project/psycopg2-binary/ Also, pypi.org has a valid ssl certificate signed by GlobalSign nv-sa If I create and activate a new virtualenv named zzz, and do ``` (zzz) mark@msapiro:~$ pip -v install wheel mailman psycopg2-binary ``` I get a successful installation. I am guessing that there is something in your local network that's redirecting connects to pypi.org to somewhere else. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

1 year

[MM3-users] Re: Can't subscribe on new site/domain

by Mark Sapiro

On 10/9/25 5:02 AM, Flo via Mailman-users wrote: > Hi, > > I added a new site in Django: lists.example.com > > Usually I click on 'view site' and I can add a Domain in Postorios. In > this case I get an error message and I need to add a Domain in Django. > Then I can go to 'view site'. > > I can create a mailing list there. However when I send an email to be > subscribed, I get the following in mailman.log (and nothing else happens): > > > Oct 09 13:46:24 2025 (110452) deque: do_confirm_verify > Traceback (most recent call last): ... > File "/usr/lib/python3/dist-packages/mailman/model/domain.py", line > 177, in __getitem__ > raise KeyError(mail_host) > KeyError: 'lists.example.com' It appears you don't have a domain in Mailman core with mail_host = 'lists.example.com'. Do you see one in Postorius' domains view? If not, perhaps you need to add it. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

8 months, 2 weeks

[MM3-users] Re: sqlalchemy.orm.exc.MultipleResultsFound: Multiple rows were found for one_or_none()

by Mark Sapiro

On 7/24/20 10:34 AM, Shashikanth Komandoor wrote: > Hi Team, > > Today, I found an error message like "Multiple rows were found > for one_or_none()" when a hold message is approved for a list. Until > yesterday the mails were accepted and delivered fine. We have seen this issue before. See <https://gitlab.com/mailman/mailman/-/issues/657>. There are also multiple threads on it in the archive, e.g., <https://lists.mailman3.org/archives/list/mailman-users@mailman3.org/thread/…>. We don't know how it happens, but the issue is that the `listarchiver` table in the database has multiple `mhonarc` entries for the same `mailing_list_id`. You can see the problem with the query select * from listarchiver where name = 'mhonarc'; There will be two entries with the same `mailing_list_id` and deleting one of them will fix this and you can run `mailman unshunt` to reprocess the shunted messages. The above referenced issue contains a script that can be run to remove the extra entry. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

5 years, 10 months

[MM3-users] Re: Hyperkitty Recommended mySQL Database Setup & Archive Importing

by Mark Sapiro

On 12/9/20 6:39 PM, matthew(a)alberti.us wrote: > > For core, the connection string seems to accept a tailing > "?charset=utf8&use_unicode=1" per > https://mailman.readthedocs.io/en/stable/src/mailman/docs/database.html So > for core, maybe just updating the connection string to include > "?charset=utfmb4&use_unicode=1" will just work? The link lists utf8 as the > recommend encoding... maybe that should be updated? I'm in the process of doing that update. > Seems the takeaway is that, for mysql databases only, the use of utf8mb4 is > recommended, and it needs to be explicitly identified in the database > settings for BOTH core and web, and probably somehow at database creation > time? It's not as critical for core because barring things like 4-byte utf-8 unicode graphics in list configurations, core doesn't store anything like that in its tables. The major issue is with HyperKitty where messages have emojis and other 4-byte utf-8 encodings in message subjects and bodies. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

5 years, 6 months

[MM3-users] Re: Is there a way of recording bounce messages?

by Mark Sapiro

On 9/21/23 17:30, Thomas Ward wrote: > > MS365's bounce handling is weird and they do not include a delivery report in the payload, instead they take the log data and append it as a text payload portion to the message. It's annoying and problematic when debugging (and likely triggers the mailman2 equivalent of "unprocessable bounce message"). > > If Andrew can provide the bounce message as an example in raw form (even off list) we can dissect it - myself probably more rapidly as I am fluent in reading them at this point from weeks worth of dealing with them - and that will probably yield the info you are looking for. It appears however that Mailman does recognize the DSN returned by MS365 as the user's delivery is being disabled by bounce. The issue is whatever DSN is returned to the list-bounces address is not attached to the notice sent to the list owner about the disable and it should be. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

2 years, 9 months

[MM3-users] Re: General question mailman3: message sender acceptance "always"

by Mark Sapiro

On 10/23/23 09:08, Wikinaut wrote: >>> In the Postorius held messages view, click on the message's subject to >> open a dialog showing the messages content > > Dear Mark, sorry: > How should I know this? Well, the subject of the message in the held messages view looks like a link. Maybe click it once to see what it does. > I'd rather prefer to have these both changes: > > i) relabel the existing one od three buttons from "accept" to "accept once" ; and > ii) add a fourth button "accept all messages from this sender (i.e. add to white list)" That wouldn't include options like "discard further posts from this user", "reject further posts from this user" and perhaps other possibilities. If I were going to do anything, it would probably be adding a line above the list of held messages saying something like "Click the message's subject for more options." -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

2 years, 8 months

[MM3-users] Re: Mailman web interface / uwsgi

by Mark Sapiro

On 11/26/22 21:29, Jan Eden via Mailman-users wrote: > > Replicating this setup on the server solved the KeyError problem, > everything works now! I just wonder why these uwsgi parameters need to > be passed explicitly when using a file socket, but not with a http > socket. You are doing more than just switching from a tcp socket to a unix socket. You are also switching from communicating with uwsgi via http protocol to uwsgi protocol. > Another (unrelated) question: Why is mailman_hyperkitty.cfg placed in > /opt/mailman/mm and not in /etc/mailman3 with the other configuration > files when using the virtualenv installation instructions > (https://docs.mailman3.org/en/latest/install/virtualenv.html#virtualenv-inst… mailman_hyperkitty and its mailman-hyperkitty.cfg are part of mailman core, not mailman-web. If you want, you could put mailman-hyperkitty.cfg in /etc/mailman3/ by putting ``` configuration: /etc/mailman3/mailman-hyperkitty.cfg ``` in the `[archiver.hyperkitty]` section of mailman.cfg, but as it really belongs to core and not mailman-web we choose to put it in /opt/mailman/mm/. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

3 years, 6 months

Search results for query "sapiro"