Search results for "sapiro" - lists.mailman3.org

[MM3-users] Re: "Cannot connect to SMTP server localhost on port 25"

by Manos Pitsidianakis

Thank you for your prompt response Mark, Στις 2019-09-18 19:12, Mark Sapiro έγραψε: > Is only one list affected, and is it all messages from this list or > only > some? Just two messages from this certain list. Subsequent messages and other activity seems to work properly > Do some deliveries of the problem message succeed? > I think not, the IndividualDelivery lines list all all recipients (list is small so I was able to check) > Postfix can return a 421 status > and drop the connection if there are too many invalid local recipients, > although I don't know if this would apply in the VERP case. Well there is no connection to postfix at all when the runner starts and the "Cannot connect to SMTP server" log shows up. Otherwise I'd have seen something in the postfix logs or tcpdumps in localhost.

7 years

[MM3-users] Re: export/import list?

by Dave McGuire

On 8/22/23 17:59, Mark Sapiro wrote: >> I'm moving from sqlite3 to postgres; I can handle that migration. >> But I'm also moving from Mailman 3.1.1 to 3.3.8; do you (or anyone >> else) know of any schema changes? I spot-checked the first few and >> they looked the same, but before going through all of them I figured >> I'd just ask here. > > Schema changes are handled automatically by alembic. The migrations are > defined in /mailman/database/alembic/versions/. Your current version is > is stored in the database in the alembic_version table. When Mailman > core is started, all migrations from your current version to the latest > version will be applied to bring your database up to date. I.e., you > don't need to be concerned about schema changes upon upgrade. They are > handled automatically. Brilliant! Thank you Mark. -Dave -- Dave McGuire, AK4HZ New Kensington, PA

3 years, 1 month

[MM3-users] Re: mailman3 auto-disabling of subscriptions

by Mike Wertheim

Thanks for the response. A while back I experimented with enabling verp-probes. The users on the list were confused by the probe emails and sent me a lot of messages asking about them, so I disabled it. There is zero spam on the list. Ill try reducing "bounce info stale after" to "2d". (Actually, would "1d" be even better?) On Fri, Jun 16, 2023 at 7:46 PM Mark Sapiro <mark(a)msapiro.net> wrote: > On 6/16/23 19:20, Mike Wertheim wrote: > > I'm running an email list on mailman3. > > > > My users are getting inundated by messages saying that their > subscriptions > > have been disabled due to their bounce score exceeding the mailing list's > > bounce_score_threshold. > > > > But there is nothing wrong with these users' email accounts. They are all > > perfectly fine. Apparently the issue is somehow related to spam. > > > Is spam being posted to your list? If so, you should ensure that Default > action to take when a member posts to the list is set to Hold for > moderation so that spammers can't subscribe to your list and post > without the post being reviewed by a moderator. Then if the post is on > topic, the moderator can set the user's moderation action to Default > processing when accepting the post so subsequent posts won't be held. > > Also set `verp_probes: yes` in the [mta] section of mailman.cfg. Then > when a user's score reaches threshhold, a probe message is sent and > delivery is only disabled if the probe bounces which it probably won't > if the issue is spam bounces. > > > > Whenever I (as admin) get these emails, I just unsubscribe the user and > > then re-subscribe them. But also, the user gets confused and emails me > > about it, which unnecessarily takes up their time and mine. > > > That should be unnecessary. Just click on the member in the members list > and set the member's Delivery status to Enabled. However, this may not > work because of https://gitlab.com/mailman/mailman/-/issues/1061 which > is not fixed until the next release, but enabling verp_probes will avoid > that issue. > > > > The relevant list settings are currently... > > bounce score threshold: 5 > > bounce info stale after: 7d > > bounce disabled warning interval: 7d > > bounce disable warnings: 5 > > > > What's the best way to fix this? I'm considering reducing "bounce > > info stale after" to "2d" and/or increasing "bounce disabled warning > > interval" to "90d". > > > Increasing "bounce disabled warning interval" or "bounce disable > warnings" won't help because the user's delivery will still be disabled. > It will just take longer for them to eventually be removed. Reducing > "bounce info stale after" to "2d" might help as long as the list gets > good posts more frequently than that, but the best way to deal with this > is to enable verp_probes and then only consider other things if that > doesn't help. > > -- > Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, > San Francisco Bay Area, California better use your sense - B. Dylan > > _______________________________________________ > Mailman-users mailing list -- mailman-users(a)mailman3.org > To unsubscribe send an email to mailman-users-leave(a)mailman3.org > https://lists.mailman3.org/mailman3/lists/mailman-users.mailman3.org/ > Archived at: > https://lists.mailman3.org/archives/list/mailman-users@mailman3.org/message… > > This message sent to mike.wertheim(a)gmail.com >

3 years, 4 months

[MM3-users] Re: Templates

by David Krantz

On Fri, Sep 29, 2017 at 12:08 AM, Mark Sapiro <mark(a)msapiro.net> wrote: > On 09/28/2017 01:56 PM, David Krantz wrote: > This is clearly a bug and should be fixed. If you report this issue at > <https://gitlab.com/mailman/mailman/issues>, we will try to fix it. I'll do that. >> Of course this very nice functionality is a bit buried. I activated it >> using the interactive python shell, seems less risky than changing the >> database directly. > > > There are many core settings not (yet) exposed in Postorius. This is > something we need to fix, but it takes time and resources. In the mean > time, 'mailman shell' is probably the best way to set them. It is okay and it works just fine. In the current version "mailman withlist" does not set a variable to a list, but it is easy enough to set it yourself if a bit poweruser-ish. br // David

9 years

[MM3-users] Re: Member Issue Discovered

by Brian Carpenter

On 10/28/20 4:29 PM, Mark Sapiro wrote: > On 10/28/20 11:11 AM, Apollinaris Schöll wrote: >> Most important is to offer an UI to completely delete users for subscribers and list admins. Currently delete account shows this message "Are you sure you want to delete your account? This will remove your account along with all your subscriptions.” >> This is not true and needs to be done. > > Why do you think it's not true? With current Mailman from the HEADs of > the GitLab branches, the only thing not removed is posts from the > archives. The Django account and the Mailman core user and address > records are all removed. This is a bug with Affinity which I have scheduled to be fixed. However I am confused. Data is completely removed from Mailman 3 core when you delete the account via Postorius but not when you unsubscribe from a list? -- Brian Carpenter Harmonylists.com Emwd.com

5 years, 11 months

[MM3-users] Re: Adding Mass Subscribe custom template error

by Arte Chambers

Correct I used list.louisvillecommunitygrocery.com On Wed, Jan 29, 2025, 2:58 PM Arte Chambers <paul.m.robey(a)gmail.com> wrote: > Thanks! Looks resolved however I'm not 100% sure which steps fixed it: > > My Steps: > ``` > cat /etc/hosts > 127.0.1.1 list.louisvillecommunitygrocery.com list > 127.0.0.1 localhost > ``` > > Updated > ``` > POSTORIUS_TEMPLATE_BASE_URL = 'http://localhost:8000/' > POSTORIUS_TEMPLATE_BASE_URL = 'https://example.com' > ``` > Restarted mailman3 AND mailmanweb service > > Updated /etc/mailman3/gunicorn.conf adding workers=9 > > Restarted mailman3 AND mailmanweb service > > Deleted custom template from Postorious > > Created new custom template from Postorious > > Added test user to list > > User was added with no errors and also received the custom Template. > > Thanks Mark, Gerald > > Bonus question: how should I calculate how many workers I should have on > my system? > > > Thank you, > Paul 'Arte Chambers' Robey > 502-408-6922 > > > On Wed, Jan 29, 2025 at 2:36 PM <vogt(a)spamcop.net> wrote: > > > > Sounds somewhat like the problem I have had: > > > > > https://lists.mailman3.org/archives/list/mailman-users@mailman3.org/thread/… > > > > The problem for me was that I am using gunicorn but did not increase the > number of workers… > > _______________________________________________ > > Mailman-users mailing list -- mailman-users(a)mailman3.org > > To unsubscribe send an email to mailman-users-leave(a)mailman3.org > > https://lists.mailman3.org/mailman3/lists/mailman-users.mailman3.org/ > > Archived at: > https://lists.mailman3.org/archives/list/mailman-users@mailman3.org/message… > > > > This message sent to paul.m.robey(a)gmail.com > Thank you, > Paul 'Arte Chambers' Robey > 502-408-6922 > > > On Wed, Jan 29, 2025 at 2:54 PM Mark Sapiro <mark(a)msapiro.net> wrote: > > > > On 1/29/25 11:20, Arte Chambers via Mailman-users wrote: > > > Ok I did install using the > > > https://docs.mailman3.org/en/latest/install/virtualenv.html > > > > > > I added > > > ``` > > > POSTORIUS_TEMPLATE_BASE_URL='https://www.example.com/' > > > ``` > > > > I hope you didn't add the above literally without replacing > > www.example.com with your actual host name. > > > > It should be > > ``` > > POSTORIUS_TEMPLATE_BASE_URL = 'list.louisvillecommunitygrocery.com' > > ``` > > > > > to /etc/mailman3/settings.py and restarted mailman services > > > > > > However I'm still getting the same error from mailman.log > > > > > > requests.exceptions.ReadTimeout: HTTPConnectionPool(host='localhost', > > > port=8000): Read timed out. (read timeout=5) > > > > I don't understand why it should still be trying to connect to > > localhost:8000. Also, I don't understand why localhost:8000 times out. > > What is your setting for localhost in /etc/hosts? it should be > > `127.0.0.1`. If it is `::1` that could be the issue. > > > > > Not sure if I'm editing the correct config file. > > > > /etc/mailman3/settings.py should be correct. > > > > -- > > Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, > > San Francisco Bay Area, California better use your sense - B. Dylan > > > > _______________________________________________ > > Mailman-users mailing list -- mailman-users(a)mailman3.org > > To unsubscribe send an email to mailman-users-leave(a)mailman3.org > > https://lists.mailman3.org/mailman3/lists/mailman-users.mailman3.org/ > > Archived at: > https://lists.mailman3.org/archives/list/mailman-users@mailman3.org/message… > > > > This message sent to paul.m.robey(a)gmail.com >

1 year, 8 months

[MM3-users] Re: Converting discussion list to read-only list (settings)

by Paul Arenson

Mark Sapiro wrote: > Issue is HyperKittyb-when replying to a message in an existing thread instead of >using the 'reply' action on that message, they use the Start a new thread button. So then >If by "read only" you mean the "Announce only mailing list style" as >opposed to the "Ordinary discussion mailing list style" the only >difference is that for the Announce only style the list attribute >allow_list_posts is False and for the Discussion style, it's True. > >This is the setting in Postorius -> Settings -> Alter Messages -> >Include the list post header an all it does is include or not include >the List-Post: header in mail from the list. Ok...there is no specific setting I see "allow_list_posts" but you wrote "Include the list post header " later on. So i set THAT one to NO? Thank you.

7 years

[MM3-users] Re: more about spanish translations

by Guillermo Hernandez (Oldno7)

On 19/2/21 18:26, Mark Sapiro wrote: > On 2/19/21 5:09 AM, Guillermo Hernandez (Oldno7) via Mailman-users wrote: >> I would like to translate it all, but as said, I cannot find where to do >> it. I wonder if it's comes from another package as allauth or something >> like this. > > Yes, it does come from allauth, specifically > allauth/templates/account/email/email_confirmation_message.txt. > > The Spanish allauth message catalog is at > <https://github.com/pennersr/django-allauth/tree/master/allauth/locale/es/LC…>. > I suppose you could submit a pull request to update it. > > Or you could just update your local file in your installation. > I will do both: first translate locally. Test it, and then see if I can share it with the rest of the people (and then I will not have to worry to maintain it when next upgrades come) Thanks a lot, as always, Mark.

5 years, 7 months

[MM3-users] Re: Pck files stuck in out queue

by Lieuallen, Thomas Otis

I’m still wondering about mailman’s cache (cache_dir setting). I have 2x cache files under it that are 3-4 days old. These are mailman cache files, not mailman-web. # pwd /opt/mailman/mm # find cache -type f -ls 38627053 4 -rw-rw---- 1 mailman mailman 13 Feb 6 16:42 cache/26/26/2626c32ded811be4e9631d2215f32d88522b67142bf0eea502362d2b15c4743e 118392 4 -rw-rw---- 1 mailman mailman 11 Feb 7 09:42 cache/98/14/9814e4457e2489e2ec77d19ce982d3643fac3ad849c9861a9198eebf53f1fcde I haven’t figured out how to work with these cache files. I found some mention that a runner would clean up cache files after a week (default) and that one could use ‘cache_life’ to change that default. So, I set the following and restarted mailman. The cache files hadn’t been removed after > 4 hours, so I unset it and restarted again. Cache_life: 1d Without further information or direction, I’m tempted to just remove those cache files and move on with life. Thank you Tom Lieuallen From: Lieuallen, Thomas Otis via Mailman-users <mailman-users(a)mailman3.org> Date: Friday, February 7, 2025 at 1:43 PM To: mailman-users(a)mailman3.org <mailman-users(a)mailman3.org> Subject: [MM3-users] Re: Pck files stuck in out queue [This email originated from outside of OSU. Use caution with links and attachments.] Mark, I checked the database; nothing there. Note that there are only 3x entries and only one is list:member:regular:header (my test), so just nothing of interest. The URL works and produces the proper template information. I finally did a find/grep in the mailman tree and found a match for this errant string. It is under the cache folder. This corresponds to the cache_dir value. I could wipe the file out, but what is the proper way of doing so and should they be cleaned out via a schedule? These don’t appear to be web related, as far as I can tell. Thank you Tom Lieuallen From: Mark Sapiro <mark(a)msapiro.net> Date: Friday, February 7, 2025 at 10:37 AM To: mailman-users(a)mailman3.org <mailman-users(a)mailman3.org> Subject: [MM3-users] Re: Pck files stuck in out queue [This email originated from outside of OSU. Use caution with links and attachments.] On 2/7/25 10:08, Lieuallen, Thomas Otis via Mailman-users wrote: > > I have a remaining issue that baffles me. With my test list, I created a template for ‘list:member:regular:header’. It just has text in it, keeping it simple. I create it and see the entries in the database tables and they are correct. However, when I send a test email, my template text is not inserted, but instead another simple text: “testing hello”. I do the same with list:member:regular:footer, and it works just fine. It is just the header that is working incorrectly. When I remove that postorius header template for the list, that ‘testing hello’ goes away. So, it’s only appearing when I have a postorius template setup for that list. What do you get from the following database queries? SELECT * FROM template WHERE name = 'list:member:regular:header'; SELECT * FROM postorius_emailtemplate WHERE name = 'list:member:regular:header'; Depending on your installation, these tables may be in separate databases, i.e., template table in mailman db and postorius_emailtemplate in mailmanweb db. And what do you get if you go to the uri in the result(s) from the first query? The context in the first results and maybe the second results should also be a clue. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan _______________________________________________ Mailman-users mailing list -- mailman-users(a)mailman3.org To unsubscribe send an email to mailman-users-leave(a)mailman3.org https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.mai…<https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.mai…><https://lists.mailman3.org/mailman3/lists/mailman-users.mailman3.org/> Archived at: https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.mai…<https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.mai…><https://lists.mailman3.org/archives/list/mailman-users@mailman3.org/message…> This message sent to lieualth(a)oregonstate.edu _______________________________________________ Mailman-users mailing list -- mailman-users(a)mailman3.org To unsubscribe send an email to mailman-users-leave(a)mailman3.org https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.mai…<https://lists.mailman3.org/mailman3/lists/mailman-users.mailman3.org/> Archived at: https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.mai…<https://lists.mailman3.org/archives/list/mailman-users@mailman3.org/message…> This message sent to lieualth(a)oregonstate.edu

1 year, 8 months

[MM3-users] Re: How to prevent members to attach executables (exe, bat, ...) to the emails sent to list

by Stephen J. Turnbull

Mark Sapiro writes: > Filtering by extension only works on message parts that have an > associated file name. Thus, while you can add things like 'exe', 'bat', > 'cmd', 'com', 'pif', 'scr', 'vbs' and 'cpl' to filter_extensions, it > won't be completely effective. > > A better approach is to use MIME types[1] and only allow those you want. > For a discussion list, a reasonable set is what this list uses: I wouldn't say "better" if you're concerned about the executables being malware. There's long history of concealing malware by giving it a MIME type different from what the extension implies, and there was at least one Windows exploit that used this technique to achieve automatic execution of malware simply by displaying the message.

6 years

Search results for query "sapiro"