Search results for "sapiro" - lists.mailman3.org

[MM3-users] Re: 404 on fresh install (Debian11)

by David Newman

On 3/28/23 5:00 PM, comprepair_jimberg--- via Mailman-users wrote: > Can you setup Mailman3 for me? I can't. But I previously provided a pointer to setup instructions using virtualenv, which is MUCH preferable to the older, buggier version packaged with Debian 11. Mark Sapiro also provided a link to a list of providers who help with setup for a fee. If it's any consolation, I practiced with test VMs about 4 or 5 times before attempting a production migration from Mailman 2. Much of my misery was caused by the initial Debian install setting the wrong ownership on some files. For that reason, things got much better when I snapshotted a brand-new Debian 11 VM and rolled back to there each time. I still made mistakes, multiple times, but at least I was no longer fighting with two installations that do things differently. dn

3 years, 6 months

[MM3-users] Re: Don't start nntp runner by default - was: Mailman3 doesn't send Mails to users (Debian12 with Plesk)

by Danil Smirnov

Hi Mark, On Fri, May 24, 2024 at 11:24 PM Mark Sapiro <mark(a)msapiro.net> wrote: > We could default mailman.cfg to contain `start: no` in the runner.nntp > section so people would need to enable it if they wanted it. What do > others think? > I'd vote for disabling it by default and also for moving the Postorius NNTP-related settings from the "Settings - List Identity" page (the last five settings) to a separate page. Users who are born later than my generation are sometimes confused and misinterpret those settings. Once a user set "Newsgroup moderation" to "Moderated" by mistake which implicitly made the mailing list moderated too. Sincerely, Danil Smirnov

2 years, 4 months

[MM3-users] Re: Core, Hyperkitty and Postorius releases

by Odhiambo Washington

On Sat, May 15, 2021 at 1:04 AM Mark Sapiro <mark(a)msapiro.net> wrote: > On 5/14/21 2:52 PM, Odhiambo Washington wrote: > > > > Do I need to install sassc in the base OS or in the virtualenv? > > Have you checked `which sassc` to see if you don't already have it. It > doesn't matter whether it's in the base OS or the virtualenv. Things > running in the virtualenv can still access the base OS, just not vice > versa. > I install sassc, because sass installation always failed - after some upgrade. <https://lists.mailman3.org/mailman3/lists/mailman-users.mailman3.org/> I remember posting about it in 2020 or 2019 :) root@gw:/usr/home/wash # which sassc /usr/local/bin/sassc -- Best regards, Odhiambo WASHINGTON, Nairobi,KE +254 7 3200 0004/+254 7 2274 3223 "Oh, the cruft.", egrep -v "^$|^.*#" :-)

5 years, 5 months

[MM3-users] Re: MM3 not starting afte an upgrade -addendum

by Gelpi Andrea

To solve the problem I had to remove VHOST parameter from config file. I remember that Vhost was mandatory for my configuration when I set it up two month ago. So I don't understand why now I had to remove it to have MM3 working. Il 24/07/20 18:59, Mark Sapiro ha scritto: > On 7/24/20 1:33 AM, Gelpi Andrea wrote: >> >> Is anything changed since two month aggo when I applied some pathces? > > > What exactly are you asking? There have been multiple commits to the > master branches of the Mailman components in the last two months and new > releases of django-mailman3, hyperkitty and postorius in early June. > -- Gelpi ing. Andrea ************************************************** I documenti vitali dimostreranno la loro vitalitˆ spostandosi spontaneamente da dove li avevate lasciati a dove non riuscirete a trovarli. **************************************************

6 years, 2 months

[MM3-users] Re: Hold messages that have binary attachments

by Quanah Gibson-Mount

--On Wednesday, August 12, 2020 11:29 AM -0700 Mark Sapiro <mark(a)msapiro.net> wrote: > On 8/12/20 9:37 AM, Quanah Gibson-Mount wrote: >> Is there a way to configure a list automatically put a hold on messages >> that have binary attachments such as jpgs, pngs, etc? > > You can use header matching rules (Header filters) for this: > > E.g., > Header = content-type > Pattern = image/ > Action = Hold > > will hold all messages with attached images > > A pattern like > > ^(?!(text/|multipart/|message/|application/.*signature)) > > will match any message that has an elemental part that isn't text/ or > some kind of signature. Thank you very much! Applied. :) Regards, Quanah -- Quanah Gibson-Mount Product Architect Symas Corporation Packaged, certified, and supported LDAP solutions powered by OpenLDAP: <http://www.symas.com>

6 years, 2 months

[MM3-users] Re: error changed after restart

by Guillermo Hernandez (Oldno7)

On 7/2/21 18:35, Mark Sapiro wrote: > On 2/6/21 10:44 AM, Guillermo Hernandez (Oldno7) via Mailman-users wrote: >> I'm using sqlite as django database and mysql for mailman. > > I'm not certain about this, but having separate databases for Django and > Mailman core may be an issue. Thanks for your reply. I'm aware by this list that some people had problems using mysql in upgrades from previous releases. That was my first thought... But it seems that the problem is not database related. As far as I can see is about some missing properties in the "REST" process from 3.3.2 to 3.3.3 or maybe some template is not well upgraded even I did a "migrate" command. I installed mailman 3 in 24th of last december, with 3.3.2 version and all worked as expected. It's my first upgrade. >

5 years, 8 months

[MM3-users] Re: uncaught bounce messages

by David Bremner

Mark Sapiro <mark(a)msapiro.net> writes: > > See the thread at > https://lists.mailman3.org/archives/list/mailman-users@mailman3.org/thread/… > > There is an example `mailman shell` session at > https://lists.mailman3.org/archives/list/mailman-users@mailman3.org/message… > that will reenable delivery for members disabled by bounce if you think > the disables were spurious. Thanks very much for the recipe. I had been trying (and failing) to do something similar using the mailmanclient API / rest client. Does anyone happen to have a working example of updating user preferences via mailmanclient? I did call save(), after setting preferences['delivery_status']='enabled', but that seemed to not be enough. If no-one has a working example I can try to reconstruct a more precise reproducer. d P.S. I wonder if it would be worth collecting some of these recipes on the list as examples in the documentation?

4 years, 11 months

[MM3-users] Re: Moving from forum to Mailman 3

by jonathan.mailing.lists＠gmail.com

Mark Sapiro wrote: > > Can you export the posts from the forum in a format that looks like > email messages? Python's standard library mailbox module can be used to > read a set of messages in any of Maildir, mbox, MH, Babyl, or MMDF > format and write them to a mbox format file which can then be imported > into HyperKitty. The requirements are that the exported messages have > headers like an email message. At a minimum, From:, Date: and Subject:. Thanks for this. I’m sure I could turn that basic information (from, date, subject) into an mbox file somehow. What else does Mailman need, eg to work out which messages are in reply to which? Would it be possible to add ex-forum message “emails” like this to an existing mailing list archive? Thank you Jonathan

6 years

[MM3-users] Re: Filter who can send on mailman3 list?

by Marcus Granath

Mark Sapiro wrote: > > As Ruth said in her reply at > https://lists.mailman3.org/archives/list/mailman-users@mailman3.org/message… > in Postorius, go to the Users dropdown and select Non-Members. On that > page there is a form to enter Email Address and Display Name with an Add > nonmember button. Sorry, but actually I can not find any "Users dropdown" to select "Non-Members" at any Postorius in my web interface. :-( Maybe, could it be that I am actually not the admin of the mailman3 server, I'm "just" the admin of my mailman-list - so just admin for my mailman-list and not for the mailman server? Maybe then I need to try contact our mailman server admin, or? Or any other way for me as just an mailman-list admin to add this "Non-Member"?.... ;-)

5 years, 6 months

[MM3-users] Re: To have mailman3 start at boot, trying to configure the systemd mailman3.service unit, but having issues

by SATOH Fumiyasu

On Sun, 09 Jun 2024 06:48:58 +0900, Mark Sapiro wrote: > ``` > #!/bin/bash > unset PYTHONSTARTUP > > exec /opt/mailman/venv/bin/mailman \ > -C "/etc/mailman3/mailman.cfg" \ > $@ > ``` You should use `"$@"` to preserver arguments. For examples: ``` $ sh -c 'for v in $@; do echo "[$v]"; done' sh a 'b *' 'c d' ... $ sh -c 'for v in "$@"; do echo "[$v]"; done' sh a 'b *' 'c d' ... ``` -- -- Name: SATOH Fumiyasu @ OSSTech Corp., Japan (fumiyas @ osstech co jp) -- Business: <https://www.OSSTech.co.jp/> -- Development: <https://GitHub.com/fumiyas/> <https://GitLab.com/fumiyas/> -- PGP Fingerprint: EE58 9CE7 A512 E5D8 1DAD 5627 6709 E8A8 C7DD 5305

2 years, 4 months

Search results for query "sapiro"