Search results for "sapiro" - lists.mailman3.org

[MM3-users] Re: mailman start - can't open file

by Mark Dale

Thanks for the pointer Mark. I've edited mailman.cfg as follows and all is well. [paths.local] var_dir: /var/tmp/mailman bin_dir: /usr/local/bin log_dir: $var_dir/logs lock_dir: $var_dir/locks data_dir: $var_dir/data cache_dir: $var_dir/cache etc_dir: $var_dir/etc messages_dir: $var_dir/messages archive_dir: $var_dir/archives template_dir: $var_dir/templates pid_file: $var_dir/master.pid lock_file: $lock_dir/master.lck [mailman] layout: local Best, Mark On 8/2/19 2:03 am, Mark Sapiro wrote: > On 2/6/19 9:58 PM, Mark Dale wrote: >> Hi All, >> >> On a new installation (pip), when starting Mailman it seems it cannot >> find the "master" file. Have I missed a configuration somewhere that >> tells it to look in "/usr/local/bin" rather than "/usr/bin"? > > > See > <http://docs.mailman3.org/en/latest/config-core.html#configuring-filesystem-…>. >

7 years, 2 months

[MM3-users] Re: No option 'postmap_command' in section: 'postfix'

by Odhiambo Washington

On Mon, Jan 30, 2023 at 9:01 PM Mark Sapiro <mark(a)msapiro.net> wrote: > On 1/30/23 09:46, Odhiambo Washington wrote: > > > > So, if I understand this correctly, there is no need for the addition of > > this parameter: > > > > ``` > > configuration: /path/to/postfix-mailman.cfg > > ``` > > to the mta config block in mailman.cfg in a non-docker environment, or > when > > only using hash tables?? > > > Correct. > Great. So, since the creation of that file is prominent in the doco, maybe a note can be added to that effect? Thank you. -- Best regards, Odhiambo WASHINGTON, Nairobi,KE +254 7 3200 0004/+254 7 2274 3223 "Oh, the cruft.", egrep -v '^$|^.*#' ¯\_(ツ)_/¯ :-)

3 years, 2 months

[MM3-users] Re: Where does sender postorius@ come from?

by Jens Günther

Am 15.06.23 um 00:34 schrieb Mark Sapiro: >> - Then I tried settings_local.py with: >> EMAIL_CONFIRMATION_FROM = 'myaddress(a)something.org' > > > That is the correct place. It should work. Did you restart the container > after making this change? > Mh, unfortunately it does not work. - I changed the file and rebuilt the container. - I also restarted all 3 containers again. - I checked in the container the settings_local.py to verify that the change "arrived" and found it. - It still sends the "reset-password"-email with postorius@$SERVE_FROM_DOMAIN as shown in the screenshot. Is there any other way to test or check it? Any more ideas? Thank you in advance. ___________________________________________ Die Inhaltsfilterung von Mailman hat die folgenden MIME-Teile aus dieser Nachricht entfernt. Content-Type: image/png Name: Bildschirmfoto_2023-06-15_22-55-29.png

2 years, 9 months

[MM3-users] Use WHAT-WG decoding strategy? [was: Another interesting error...]

by Stephen J. Turnbull

Mark Sapiro writes: > > UnicodeDecodeError: 'gb2312' codec can't decode byte 0x87 in position 2: > > illegal multibyte sequence I'm pretty sure 0x87 is reserved by the later GBK standard (implemented as an encoding in GB18030) as a prefix for extensions. This is a common problem with Chinese and Japanese encodings: junky email clients use "traditional" names denoting encodings with smaller repertoires to denote modern encodings. I wonder if we shouldn't just promote all gb* to gb18030 and all Shift JIS to the most recent version, as in the WHAT-WG web encodings standard. If nobody says "that's really stupid", I'll write up a RFE later this week. I think there's already a module on PyPI we can use to implement. Steve

7 years, 11 months

[MM3-users] Re: Reset digest number and volume

by Andrew Bernard

HI Mark, I get: >>> commit() Traceback (most recent call last): File "<console>", line 1, in <module> NameError: name 'commit' is not defined Andrew On 26/6/19 11:49 pm, Mark Sapiro wrote: > On 6/26/19 3:08 AM, andrew.bernard(a)gmail.com wrote: >> How to do this? After lots of testing on my pre-release beta testing list, I want the first production digest to be reset toVolume 1, Number 1. > > You can do this in `mailman shell` by setting the list's `volume` and > `next_digest_number` to 1. E.g., > > > $ ./mailman shell -l list(a)example.com > Welcome to the GNU Mailman shell > The variable 'm' is the list(a)example.com mailing list >>>> m.volume = 1 >>>> m.next_digest_number = 1 >>>> commit()

6 years, 9 months

[MM3-users] Re: User settings triggers error

by Mark Dadgar

On Jun 28, 2020, at 4:56 PM, Mark Sapiro <mark(a)msapiro.net> wrote: > > On 6/28/20 4:39 PM, Mark Dadgar wrote: >> >> The patch does not apply cleanly against /usr/lib/python3/dist-packages/hyperkitty/models/email.py >> >> patching file email.py >> patch: **** malformed patch at line 4: import os > > > That probably isn't because of version mismatch. That would give applied > at offset or with fuzz or a reject. malformed patch means the patch file > is not formatted correctly. Here it is again as an attachment. That may > help. That gives a slightly different error: mark@mail:/usr/lib/python3/dist-packages/hyperkitty/models$ sudo patch < /tmp/patch.txt patching file email.py Hunk #1 FAILED at 24. patch: **** malformed patch at line 23: - Mark ----- mark(a)pdc-racing.net | 408-348-2878

5 years, 9 months

[MM3-users] Re: sending messages in response to posts from non-members

by David Bremner

Mark Sapiro <mark(a)msapiro.net> writes: > On 2/26/22 04:26, David Bremner wrote: >> >> I'd like to turn off the "bounce messages" sent by mailman to >> non-members. My reasoning is that most such posts are spammers, and >> often use forged return-paths / From's, so I end of sending steady >> stream of backscatter to amazon.com etc... >> >> Is this configurable (without postorius) somehow? > > What exactly do you want? Do you want to discard without notice any > nonmember posts or do you want to hold them but not send a notice of the > hold to the poster? It was the latter, and your suggestion for existing lists seems to have worked. Thanks, David

4 years, 1 month

[MM3-users] Re: cron error - /opt/mailman/venv/bin/mailman-web runjobs daily

by Stephen J. Turnbull

Mark Sapiro writes: > You can't have two accounts in Postorius/Django with the same email > address. But why would you want to? There should be no problem with > a single Django user being subscribed to a list with more than one > role. I for one am uncomfortable having the superuser role being used by an ordinary user account, for several reasons. I'm pretty sure that is what Odhiambo was concerned about. I will have similar concerns about the domain user role when we implement it. The preference for a single email address across roles is harder for me to understand. -- GNU Mailman consultant (installation, migration, customization) Sirius Open Source https://www.siriusopensource.com/ Software systems consulting in Europe, North America, and Japan

7 months, 2 weeks

[MM3-users] Re: Mailman/Django-allauth integration with Yahoo

by Дилян Палаузов

Hello Mark, thanks for your answer. So I had in the past registered that yahoo address withing mailman. Then I added oauth/openid to yahoo, then gave it a try. I have receieved as resut two email in the yahoo mailbox. One is sent by yahoo, notifying about account activity. The other, which I have not overseen as it was evaluated as spam, contains: You are receiving this email because you or someone else tried to signup for an account using email address: zzz(a)yahoo.com However, an account using that email address already exists. In case you have forgotten about this, please use the password forgotten procedure to recover your account: https://…/accounts/password/reset/ So the text "we have sent you an email for verification” but the email stating ”there is already such an account within mailman” is misleading, especially after the first message is shown to an yahoo-authenticated user. Greetings // Дилян -----Original Message----- From: Mark Sapiro <mark(a)msapiro.net> To: mailman-users(a)mailman3.org Subject: [MM3-users] Re: Mailman/Django-allauth integration with Yahoo Date: 06/08/24 03:01:24 On 8/4/24 03:35, Дилян Палаузов wrote: > > Then I get a site, partially in English, partially localized. It is in my domain at address /mm3/accounts/confirm-email/ , and states: > > Messages: Confirmation of email address sent to ...(a)yahoo.com > Menu: Entrance \r\n New registration > > Confirm your email address: > > We have sent an email to you for verification. Follow the link provided to finalize the signup process. If you do not see the verification email in your main inbox, check your spam folder. Please contact us if you do not receive the verification email within a few minutes. I'm not certain, but it looks like you are signing in to a new account and django-allauth is creating the account with the address from yahoo and is asking you to confirm. > I have indeed received an email, which states: > New signin from … Hi, Your Yahoo account … was just used to sign in on …. If you did this, you’re all set. If not, please use this link to stop sharing, and create a new password. Have a great day! Thanks,Yahoo > > So, the /account/confirm-email states I have received an email for verification, but the email sent says no verification is needed, I am all set up. > > Any idea what can I improve? This appears to be a glitch in the new account verification process. In any case, it's a django-allauth issue, not a Mailman issue. Once you have gone through this dance, what happens the next time you sign in via Yahoo. > In addition https://gitlab.com/mailman/mailman-suite/-/blob/master/mailman-suite_projec… suggests adding in settings.py: > > SOCIALACCOUNT_PROVIDERS = {'openid': {'SERVERS': [dict(id='yahoo', name='Yahoo', openid_url='http://me.yahoo.com')]}} > > which I have not done. That is, I do not use the “openid” provider, but the “yahoo” provider. Do I have to use the OpenID provider when using Yahoo? I don't think it would matter. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan _______________________________________________ Mailman-users mailing list -- mailman-users(a)mailman3.org To unsubscribe send an email to mailman-users-leave(a)mailman3.org https://lists.mailman3.org/mailman3/lists/mailman-users.mailman3.org/ Archived at: https://lists.mailman3.org/archives/list/mailman-users@mailman3.org/message… This message sent to dpa-mailman(a)aegee.org

1 year, 7 months

[MM3-users] Re: What is result of planned MM3 integrated installation at Pycon?

by Tom Browder

On Sat, Jun 9, 2018 at 16:48 Mark Sapiro <mark(a)msapiro.net> wrote: > On 6/9/18 2:19 PM, Tom Browder wrote: > > I may have missed the announcement, but I thought it was hoped to get a > > major leap toward an integrated MM3 installation at the May Pycon. Did > > anything exciting happen toward that goal, or should I just press on with > > the latest release? > > We accomplished a lot. We are still tying up a few loose ends, but the > release should be soon. FWIW, this list is currently running on the > HEADs of the GitLab branches. Thanks, Mark. Will the release be pretty much a one-step affair for us older folks without much energy? -Tom

7 years, 9 months

Search results for query "sapiro"