Search results for "sapiro" - lists.mailman3.org

[MM3-users] Re: Importing config and archives only partially succeeded?

by Eric Broens

The settings - Archiving, are not different from the ones that do show the messages:"Private Archives" selected, and Active archivers "hyperkitty" also selected. I was trying to find out how the hyperkitty page gets the mails from the database, and if I can start from there.Or maybe something is not completely correct in the database tables. Best Regards,Eric On Sunday, December 13, 2020, 01:27:53 AM GMT+1, Mark Sapiro <mark(a)msapiro.net> wrote: On 12/12/20 3:56 PM, Eric Broens via Mailman-users wrote: > After everything was imported, and I noticed that the mails were not shown in the archives for half of the mailinglists, I ran "manage.py update_index" to index the mails for all mailinglists.This command is still running for hours.Since it builds the search index, I don't expect that this would make the mails available on the webpage. I agree, that won't make the mails available on the webpage. If you're using the default Whoosh search engine, "hours" is not unexpected. Elasticsearch is much faster and Xapian faster still. What do you see in Postorius - Settings -> Archiving for the lists whose messages don't show? -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan _______________________________________________ Mailman-users mailing list -- mailman-users(a)mailman3.org To unsubscribe send an email to mailman-users-leave(a)mailman3.org https://lists.mailman3.org/mailman3/lists/mailman-users.mailman3.org/

5 years, 10 months

[MM3-users] Re: Template Ignored?

by Stephen Daniel

That pulls a 404 error. Thanks for the hint. I will investigate. On Thu, Feb 17, 2022 at 11:49 AM Mark Sapiro <mark(a)msapiro.net> wrote: > On 2/17/22 08:04, Stephen Daniel wrote: > > Mailman3 people -- > > > > I created a new list, and used postorius to create a template for " > > list:user:notice:welcome". I then used the mass subscription feature to > > add myself to the list, having checked "pre-confirmed", "pre-approved", > and > > "pre-verified". > > > > I received a welcome message that appears to be the default welcome > > message. It certainly wasn't what I put into my template. > > > > Any suggestions on how I get mailman to use my template? Things I might > be > > doing wrong? > > > What is your setting for POSTORIUS_TEMPLATE_BASE_URL? If you create a > full URL by appending > `/api/templates/list/list.example.com/list:user:notice:welcome` > <http://list.example.com/list:user:notice:welcome> to that > where `list.example.com` is the actual list_id of your list, and go to > that URL, what do you get? > > -- > Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, > San Francisco Bay Area, California better use your sense - B. Dylan > _______________________________________________ > Mailman-users mailing list -- mailman-users(a)mailman3.org > To unsubscribe send an email to mailman-users-leave(a)mailman3.org > https://lists.mailman3.org/mailman3/lists/mailman-users.mailman3.org/ >

4 years, 8 months

[MM3-users] Re: config incoming email in my domain cpanel

by tlhackque

I think you're confused. You already have mail.labbrands.com set up as the MX record for labbrands.com. And it has an A record with the same address as your webserver. So if you're getting e-mail on that domain, there's another e-mail server running on that IP address. You can't have 2 servers on port 25. In that case, as has been noted before, you'll need to setup a relay in that server, not a firewall redirect. Depending on your MTA, you would need to relay to your internal server. And make sure your firewall setup allows your MTA to do this. We can see it's EXIM: telnet mail.labbrands.com 25 Trying 192.185.51.89... Connected to mail.labbrands.com (192.185.51.89). Escape character is '^]'. help 220-gator4137.hostgator.com ESMTP Exim 4.87 #1 Thu, 03 Aug 2017 15:47:48 -0500 220-We do not authorize the use of this system to transport unsolicited, 220 and/or bulk e-mail. 214-Commands supported: 214 AUTH STARTTLS HELO EHLO MAIL RCPT DATA NOOP QUIT RSET HELP quit 221 gator4137.hostgator.com closing connection Connection closed by foreign host. Or, consolidate all your e-mail to one server - which is a lot easier to manage unless you have a really big operation. Postfix is probably the right choice, but requires more setup. Although Mailman3 configuration is not well documented (as you've discovered), you may want to get help from someone with more general network and mail experience. You're now into territory that is, as Simon indicated, not Mailman-specific. On 03-Aug-17 16:28, Rafael Mora wrote: > El jue., 3 ago. 2017 a las 15:26, Mark Sapiro (<mark(a)msapiro.net>) escribió: > >> On 08/03/2017 01:22 PM, Rafael Mora wrote: >>> El jue., 3 ago. 2017 a las 15:18, Mark Sapiro (<mark(a)msapiro.net>) >> escribió: >>>> You need to forward port 25 for SMTP mail delivery and if you want the >>>> web UI (Postorius and HyperKitty) accessible from the outside, port 80 >>>> for http and/or port 443 for https >>>> < >>>> >> https://www.iana.org/assignments/service-names-port-numbers/service-names-p… >>>>> . >>> I mean for incoming mail redirected from my hostgator hosting, because >> when >>> I suscribe an email address MM3 sends a confirmation email, so I have to >>> reply to be suscribed to the list. >> >> As I said, for mail delivery you need to forward port 25 to the Mailman >> server. >> > Ok so I'll redirect in my zentyal firewall the port 25 to my local centos7 > with postfix and MM3 with IP 192.168.1.42. Thanks Mark. > > >> >> -- >> Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, >> San Francisco Bay Area, California better use your sense - B. Dylan >> _______________________________________________ >> Mailman-users mailing list >> mailman-users(a)mailman3.org >> https://lists.mailman3.org/mailman3/lists/mailman-users.mailman3.org/ >> -- This communication may not represent my employer's views, if any, on the matters discussed.

9 years, 2 months

[MM3-users] Re: How to create user accounts and mail addresses through CURL instead of Site Administration ?

by Shashikanth Komandoor

Thank you Mark for you response in time. On Tue, Aug 11, 2020 at 9:40 AM Mark Sapiro <mark(a)msapiro.net> wrote: > On 8/10/20 11:18 AM, Shashikanth Komandoor wrote: > > I am currently automating a few things using the CURL commands but > only > > postorius related as of now. Now I have a requirement. > > > > I need to create a lot many users and their mapping email ids through > > Site Administration almost daily. But it is becoming to do the same > through > > Graphical Interface. > > > > So, I just want to know the CURL commands that can be used to create > the > > user accounts and email ids mapped to user accounts. > > The accounts you are talking about are Django accounts. You cannot > create these via CURL to the Mailman core REST API. > > You might find > <https://www.django-rest-framework.org/tutorial/quickstart/> of interest. > > -- > Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, > San Francisco Bay Area, California better use your sense - B. Dylan > _______________________________________________ > Mailman-users mailing list -- mailman-users(a)mailman3.org > To unsubscribe send an email to mailman-users-leave(a)mailman3.org > https://lists.mailman3.org/mailman3/lists/mailman-users.mailman3.org/ > -- Thanks & Regards, Shashi Kanth.K 9052671936

6 years, 2 months

[MM3-users] Re: SMTPSenderRefused - howto enable STARTTLS for local mail drop

by Stefan Bauer

No matter what i try, mailman still only connects without STARTTLS: /etc/mailman3/mailman.cfg [mta] incoming: mailman.mta.postfix.LMTP outgoing: mailman.mta.deliver.deliver smtp_host: localhost smtp_port: 25 smtp_user: smtp_pass: smtp_verify_hostname: false smtp_verify_cert: false smtp_secure_mode: starttls systemctl restart mailman3 Nov 9 12:14:52 al02 postfix/smtpd[4183267]: connect from localhost[::1] Nov 9 12:14:52 al02 postfix/smtpd[4183276]: connect from localhost[::1] Nov 9 12:14:52 al02 postfix/smtpd[4183276]: disconnect from localhost[::1] ehlo=1 mail=0/1 rset=0/1 quit=1 commands=2/4 Did i miss something? Am Mo., 8. Nov. 2021 um 18:06 Uhr schrieb Stefan Bauer <cubewerk(a)gmail.com>: > awesome! Thank you a lot! > > Am Mo., 8. Nov. 2021 um 17:37 Uhr schrieb Mark Sapiro <mark(a)msapiro.net>: > >> On 11/8/21 1:03 AM, Stefan Bauer wrote: >> > >> > how can we configure mailman3, to use STARTTLS when dropping mails to >> local >> > postfix for final delivery? >> >> >> Set `smtp_secure_mode: starttls` in the `mta` section of mailman.cfg. >> See >> >> https://gitlab.com/mailman/mailman/-/blob/master/src/mailman/config/schema.… >> >> -- >> Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, >> San Francisco Bay Area, California better use your sense - B. Dylan >> _______________________________________________ >> Mailman-users mailing list -- mailman-users(a)mailman3.org >> To unsubscribe send an email to mailman-users-leave(a)mailman3.org >> https://lists.mailman3.org/mailman3/lists/mailman-users.mailman3.org/ >> >

4 years, 11 months

[MM3-users] Re: Template Ignored?

by Stephen Daniel

Thanks for clarifying. All is working now!!! On Thu, Feb 17, 2022 at 1:27 PM Mark Sapiro <mark(a)msapiro.net> wrote: > On 2/17/22 10:10, Stephen Daniel wrote: > > Fixed the POSTORIUS_TEMPLATE_BASE_URL. Doesn't fix the issue. > > I've been playing with wget, and no matter what I put, I keep getting a > 404 > > error. > > > > So: this works: > > > > wget -O wget.out --user restadmin --password restpass ' > > http://localhost:8001/3.1/lists/list.example.com' > > > > but this does not (404 error): > > > > wget -O wget.out --user restadmin --password restpass ' > > > http://localhost:8001/3.1/templates/list/list.example.com/list:user:notice:… > > > You are using Mailman core's REST API which is wrong. You need to get > the template from Postorius. Maybe something like > > > > http://localhost/postorius/api/templates/list/list.example.com/list:user:no… > > Where http://localhost/postorius/ is the URL you use to access > Postorius, maybe mailman3 instead of postorius. > > Once you figure that out, POSTORIUS_TEMPLATE_BASE_URL is just the scheme > and domain part of that. > > -- > Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, > San Francisco Bay Area, California better use your sense - B. Dylan > _______________________________________________ > Mailman-users mailing list -- mailman-users(a)mailman3.org > To unsubscribe send an email to mailman-users-leave(a)mailman3.org > https://lists.mailman3.org/mailman3/lists/mailman-users.mailman3.org/ >

4 years, 8 months

[MM3-users] Re: Hyperkitty 1.1.1 to HyperKitty 1.2.1

by Thomas G

Indeed, it was a domain problem. hatlab.fr is the general domain, mailing, the website to manage our mailinglist. And in this case "FILTER_VHOST" have to be switch on "False". Fixed ! Thanks . Le jeu. 4 oct. 2018 à 23:21, Mark Sapiro <mark(a)msapiro.net> a écrit : > On 10/04/2018 03:49 AM, Thomas G wrote: > > I tried all job, without result. > > (and they are correctly in the crontab) > > > > [image: image.png] > > > > If I try to find my list in the form, hyperkitty can find it: > > > > [image: image.png] > > > Since you are a gmail user, you probably didn't see that content > filtering removed your screen shots, but see your post at > < > https://lists.mailman3.org/archives/list/mailman-users@mailman3.org/message… > >. > > I did in fact see your screen shots in my direct copy, but I am unable > to determine what your issue is except there may be some domain > confusion between mailing.hatlab.fr and hatlab.fr. Are your list > settings set for Public archives and hyperkitty active? > > -- > Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, > San Francisco Bay Area, California better use your sense - B. Dylan > _______________________________________________ > Mailman-users mailing list -- mailman-users(a)mailman3.org > To unsubscribe send an email to mailman-users-leave(a)mailman3.org > https://lists.mailman3.org/mailman3/lists/mailman-users.mailman3.org/ >

8 years

[MM3-users] Re: How to modify system preferences

by Allan Hansen

The other way is to tell all your users to use gmail, as that is how they handle messages from email lists, no matter how much I and others have complained to them about it. :-) Yours, Allan Hansen hansen(a)rc.org > On Feb 19, 2021, at 9:50 , Mark Sapiro <mark(a)msapiro.net> wrote: > > On 2/19/21 5:15 AM, Jack Lenox via Mailman-users wrote: >> >> The documentation states that these are only accessible in a read-only >> format via the REST API, but presumably there is a way of modifying >> these somewhere? I can't find a way of specifying this in my config and >> can't find a relevant example in the sample schema.cfg. >> >> At this stage, all I want to do is set the default for >> "receive_own_postings" to False. Can anyone point me in the right >> direction here? > > > The defaults for settings like this are not directly configurable. You > need to patch the relevant entry in mailman/core/constants.py > > I have just filed <https://gitlab.com/mailman/mailman/-/issues/832> for > this. > > -- > Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, > San Francisco Bay Area, California better use your sense - B. Dylan > _______________________________________________ > Mailman-users mailing list -- mailman-users(a)mailman3.org > To unsubscribe send an email to mailman-users-leave(a)mailman3.org > https://lists.mailman3.org/mailman3/lists/mailman-users.mailman3.org/

5 years, 8 months

[MM3-users] Re: Issues with cross posted emails after upgrading to mailman 3.3.6

by Simon Coggins

On 5 Nov 2021, at 6:30 am, Mark Sapiro <mark(a)msapiro.net<mailto:mark@msapiro.net>> wrote: > Yeah it’s not a great solution but it’s the quickest I could come up with that works “for us”. 99% of our lists are announcement lists only with minimal replies so while this will break some. I’m hoping it will give us enough time to wait out a proper fix. I’ve created a new issue #955 with as much detail as I think you’ll need. Let me know if you need any more. Thanks for filing the issue. I'll work on a solution. My current thinking is to add a `count` column to the message table, set the count to 1 when initially adding a message-id, increment the count when adding an existing message-id, decrement the count when deleting a message-id and only delete the entry and message when the count reaches 0. That should work well. I’m happy to do some testing of any patches you create in our test environment if you need extra testing. -- Mark Sapiro <mark(a)msapiro.net<mailto:mark@msapiro.net>> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan _______________________________________________ Mailman-users mailing list -- mailman-users(a)mailman3.org<mailto:mailman-users@mailman3.org> To unsubscribe send an email to mailman-users-leave(a)mailman3.org<mailto:mailman-users-leave@mailman3.org> https://lists.mailman3.org/mailman3/lists/mailman-users.mailman3.org/<https://lists.mailman3.org/mailman3/lists/mailman-users.mailman3.org> —Simon

4 years, 11 months

[MM3-users] Re: Pkl files with ".last" extension

by Keith Christian

Mark, Alright, sounds logical, appreciate your reply, On Fri, Jul 12, 2024, 15:50 Mark Sapiro <mark(a)msapiro.net> wrote: > On 7/12/24 2:20 PM, Keith Christian via Mailman-users wrote: > > In the MM2 to MM3 migration project I'm involved with, I see files with > > names like config.pkl.last along with config.pkl. > > > > Is there a special reason for the ".last" extension and if so, what is > it? > > > A Mailman 2.1 list has possibly as many as 4 configuration files. > > - config.pck (not pkl) is the current list configuration. > - config.pck.last is the immediately prior configuration > used in case config.pck is corrupt or missing. > > In addition there may be config.db and config.db.last files. These only > exist if the list predates MM 2.1 and should be removed because they're > old and could be used as a fallback if both config.pck and > config.pck.last are missing or corrupt. > > -- > Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, > San Francisco Bay Area, California better use your sense - B. Dylan > > _______________________________________________ > Mailman-users mailing list -- mailman-users(a)mailman3.org > To unsubscribe send an email to mailman-users-leave(a)mailman3.org > https://lists.mailman3.org/mailman3/lists/mailman-users.mailman3.org/ > Archived at: > https://lists.mailman3.org/archives/list/mailman-users@mailman3.org/message… > > This message sent to keith1christian(a)gmail.com >

2 years, 3 months

Search results for query "sapiro"