Search results for "sapiro" - lists.mailman3.org

[MM3-users] Re: Disable archives per list

by Mark Sapiro

On 2/25/21 1:57 AM, Bernd Wurst wrote: > > Can I as the server admin disable archiving (or set other list options) > in a way that the list admin can not change it via postorious? As the server admin, you can enable/disable archivers sitewide. See <https://gitlab.com/mailman/mailman/-/blob/master/src/mailman/config/schema.…> et seq. Note that the prototype archiver, if enabled, stores messages in the file system in maildir format. Normally a list admin can select which of the enabled archivers is active for that list via Postorius. To prevent this, you would have to modify Postorius. It would be easy enough to just remove settings from the relevant templates. > Can I have custom archiver settings per list or per domain > (customer-specific hyperkitty)? I'm not sure what you mean by "custom archiver settings", but other than enable/disable and public/private, probably not. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

5 years, 5 months

[MM3-users] Re: auto-away notices as bounces

by Mark Sapiro

On 8/24/21 11:17 AM, Andreas Barth wrote: > > Well, the mail adress got disabled, and the user got warning mails > ("Your subscription for list mailing list has been disabled"). As none > of the list owners did that, I don't think there is any other > explanation. Please note that individualsation was enabled, so all > mails are sent out with per-subscriber mail envelope address, which > then makes bounce detection quite straight-forward. If by 'individualsation was enabled' you mean messages were VERPed, there could be a bug here. There are a couple of considerations. First the vacation responder should not respond to list messages. See <https://www.rfc-editor.org/rfc/rfc5230.html#section-4.6>. That said, bounce processing should treat even a VERPed message as unrecognized if it doesn't look like some kind of DSN. This may not be the case in MM 3. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

4 years, 11 months

[MM3-users] Re: Emergency moderation and clearing out a lot of held messages

by Mark Sapiro

On 4/28/22 12:31, bob B via Mailman-users wrote: > sorry that makes sense, users not senders, but what is the setting for the sender? I have emergency moderation on a list, and if someone sends to the list they get this message: > ************************** > Your mail to 'maillistalpha(a)XXXX.com' with the subject > test > Is being held until the list moderator can review it for approval. > The message is being held because: > Emergency moderation is in effect for this list > Either the message will get posted to the list, or you will receive > notification of the moderator's decision. > ****************************************************** > > Can I turn this off for a list? As you suggested in your OP, set "Notify users of held messages" to No. Is that not working? It should. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

4 years, 3 months

[MM3-users] Re: Walk-thru for Ubuntu Bionic Mailman 3 Full setup

by Mark Sapiro

On 7/8/22 9:16 AM, kisner(a)live.com wrote: > > Just out of curiosity and to try to improve the doc I can do this a little later. But I can tell you for sure the pip install psycopg2-binary<2.9 command failed for me on Ubuntu 22.04 and Debian 11.3. I'm not saying it's *not* me, and I don't know when the last time that doc was updated but I couldn't get it to work on a few different distros. The issue is when you do ``` pip install psycopg2-binary<2.9 ``` your shell (sh, bash, zsh or whatever) interprets `<2.9` as an input redirection and probably says something like `2.9: No such file or directory`. You need to do something like ``` pip install psycopg2-binary\<2.9 ``` or ``` pip install 'psycopg2-binary<2.9' ``` I'll update the doc. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

4 years, 1 month

[MM3-users] Re: Is there a way to find out when a user subscribed to a list

by Mark Sapiro

On 4/17/24 15:14, Mark wrote: > You can query the mailman database ... > > select email, registered_on,verified_on from mailman.public.address > where email = 'mmasoudf(a)aaas.org' > > > On 2024-04-18 03:19, Mohsen Masoudfar wrote: >> Hi, >> We need to find out when a specific user joined a list. Is there a way >> to get this information? Querying the database in that way is not reliable. Yes, it is correct that the user has both a user record and an address record, and the user record has a created_on date and the address record has both registered_on and verified_on dates, but those are only the creation/verification dates for those records. They are not necessarily the date that that user/address subscribed to any list. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

2 years, 4 months

[MM3-users] Re: Held messages showing a reason not in English on the Postorious

by Mark Sapiro

On 6/25/24 20:13, Alan KT So (ITSC) wrote: > We just notice a held message from a user's list showing the held reason in Ukrainian, but the interface is in US English and the list's preferred language is English (USA). We could not repeat the issue. What can be the reason behind? > > [cid:image001.png@01DAC7B9.AF2B0400] I'm assuming the image that content filtering removed was a screen shot of the held message view in Postorius. was the sender of the message a list member with preferred language Ukranian? There may be an issue here. The line at https://gitlab.com/mailman/mailman/-/blob/master/src/mailman/chains/hold.py… calls format_reasons which will translate the reasons in whatever the current language context is. It should probably explicitly specify the list's preferred language. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

2 years, 1 month

[MM3-users] Re: Header settings and Gmail

by Mark Sapiro

On 7/29/24 12:25, erik(a)dante.de wrote: > > As a preventive measure, it helps to use DMARC mitigation action with “Replace From: with list address” and “ DMARC Mitigate unconditionally ”. But now some users are unhappy with the From header " Username via Test-liste <test(a)test-liste.org>". They would rather have their email address in it. If your Mailman core version is >=3.3.9 you can add `^.*(a)gmail\.com` to dmarc_addresses (DMARC addresses in Postorius) to apply the mitigation to gmail.com addresses instead of unconditionally, but this won't help your gmail users. > Is there a solution with which Google delivers the mailing list messages without complaining, but the sender email address is also in the “From:”? No. This is just one example of Google/gmail behaving oddly. gmail.com publishes a DMARC policy of none, yet they require incoming email From: the gmail.com domain to pass DMARC -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

2 years

[MM3-users] Re: New releases

by Mark Sapiro

On 6/9/20 1:05 AM, Danil Smirnov wrote: > On Tue, 9 Jun 2020 at 00:05, Mark Sapiro <mark(a)msapiro.net> wrote: > >> After you upgraded did you run these django-admin commands? >> ``` >> django-admin collectstatic --clear --noinput --verbosity 0 >> django-admin compress >> django-admin compilemessages >> django-admin migrate >> ``` >> These 4 commands should be run after every update to Postorius, >> HyperKitty or django_mainlman3. >> > > Hm, interesting... Could you point me to some related docs please? The documentation is weak and should be updated, but see <https://docs.mailman3.org/en/latest/upgrade-3.2.html#migration-steps> > To upgrade, I've just bumped app versions in my Dockerfiles, built and > restarted... > Mailman-core worked right away with no issues. > Mailman-web (Hyperkitty) failed with the error: > > ---------- > ERROR 2020-06-08 19:46:41,942 14 django.request Internal Server Error: > /hyperkitty/ > Traceback (most recent call last): > File "/usr/lib/python3.6/site-packages/compressor/base.py", line 282, in > precompile > mod = import_module(mod_name) > File "/usr/lib/python3.6/importlib/__init__.py", line 126, in > import_module > return _bootstrap._gcd_import(name[level:], package, level) > File "<frozen importlib._bootstrap>", line 994, in _gcd_import > File "<frozen importlib._bootstrap>", line 971, in _find_and_load > File "<frozen importlib._bootstrap>", line 953, in _find_and_load_unlocked > ModuleNotFoundError: No module named 'sassc -t compressed {infile} > {outfile}' ... > I've fixed the error by removing the older file which is > /opt/mailman-web-data/static/hyperkitty/libs/bootstrap/stylesheets/_bootstrap.scss > > After that everything seems to be working fine. I'm not sure about the above error. 'sassc -t compressed {infile} {outfile}' is defined in `settings` COMPRESS_PRECOMPILERS, but it is a command to be run as part of `django-admin compress`, not a module to be imported. Possibly running `django-admin compress` before starting Hyperkitty would have avoided this. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

6 years, 2 months

[MM3-users] Re: no mails to list members

by Mark Sapiro

On 1/4/19 6:49 AM, Thomas Stein wrote: > > While we`re at it. Is /var/lib/mailman3/templates/lists/$listname the right location for customized templates? There are multiple ways to reference templates, but just putting them in that location should work. > Should > I name the template list:member:generic:footer.txt or list_member_generic_footer.txt? Your list was created with an older version of import21. That version named the templates it stored with underscores rather than colons and set the URI for that template to use the underscore name. Thus, without changing the URI for the template, you need to continue to use the underscore name for those templates, but for other templates, you can use the name with colons and not worry about the URI. > Is there some documentation > what variables i can put in those templates? See <https://mailman.readthedocs.io/en/latest/src/mailman/rest/docs/templates.ht…>. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

7 years, 7 months

[MM3-users] Re: Delete Django profiles not signed up to a list

by Mark Sapiro

On 2/8/21 1:22 AM, r.woithe(a)callassoftware.com wrote: > Hello, > > i did try the script and unfortunately there is a problem. The script is deleting django-users are not member,nonmember ... of any lists.But thats not the point. Its ok if a user want to be only a django-user to see the archives and work with them. If a user sign's up for an account at /accounts/signup/ and then confirms her address, she will then be a Mailman user with a user and an address record even though not a member of any lists. > The script should delete django-users who dont confirm your email address. Change one line in the script from ``` if mm_user is None or len(list(mm_user.memberships.members)) == 0: ``` to ``` if mm_user is None: ``` And it will do what you want. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

5 years, 6 months

Search results for query "sapiro"