Search results for "sapiro" - lists.mailman3.org

[MM3-users] Re: Disable archives per list

by Mark Sapiro

On 2/25/21 1:57 AM, Bernd Wurst wrote: > > Can I as the server admin disable archiving (or set other list options) > in a way that the list admin can not change it via postorious? As the server admin, you can enable/disable archivers sitewide. See <https://gitlab.com/mailman/mailman/-/blob/master/src/mailman/config/schema.…> et seq. Note that the prototype archiver, if enabled, stores messages in the file system in maildir format. Normally a list admin can select which of the enabled archivers is active for that list via Postorius. To prevent this, you would have to modify Postorius. It would be easy enough to just remove settings from the relevant templates. > Can I have custom archiver settings per list or per domain > (customer-specific hyperkitty)? I'm not sure what you mean by "custom archiver settings", but other than enable/disable and public/private, probably not. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

4 years, 4 months

[MM3-users] Re: auto-away notices as bounces

by Mark Sapiro

On 8/24/21 11:17 AM, Andreas Barth wrote: > > Well, the mail adress got disabled, and the user got warning mails > ("Your subscription for list mailing list has been disabled"). As none > of the list owners did that, I don't think there is any other > explanation. Please note that individualsation was enabled, so all > mails are sent out with per-subscriber mail envelope address, which > then makes bounce detection quite straight-forward. If by 'individualsation was enabled' you mean messages were VERPed, there could be a bug here. There are a couple of considerations. First the vacation responder should not respond to list messages. See <https://www.rfc-editor.org/rfc/rfc5230.html#section-4.6>. That said, bounce processing should treat even a VERPed message as unrecognized if it doesn't look like some kind of DSN. This may not be the case in MM 3. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

3 years, 10 months

[MM3-users] Re: Emergency moderation and clearing out a lot of held messages

by Mark Sapiro

On 4/28/22 12:31, bob B via Mailman-users wrote: > sorry that makes sense, users not senders, but what is the setting for the sender? I have emergency moderation on a list, and if someone sends to the list they get this message: > ************************** > Your mail to 'maillistalpha(a)XXXX.com' with the subject > test > Is being held until the list moderator can review it for approval. > The message is being held because: > Emergency moderation is in effect for this list > Either the message will get posted to the list, or you will receive > notification of the moderator's decision. > ****************************************************** > > Can I turn this off for a list? As you suggested in your OP, set "Notify users of held messages" to No. Is that not working? It should. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

3 years, 2 months

[MM3-users] Re: Walk-thru for Ubuntu Bionic Mailman 3 Full setup

by Mark Sapiro

On 7/8/22 9:16 AM, kisner(a)live.com wrote: > > Just out of curiosity and to try to improve the doc I can do this a little later. But I can tell you for sure the pip install psycopg2-binary<2.9 command failed for me on Ubuntu 22.04 and Debian 11.3. I'm not saying it's *not* me, and I don't know when the last time that doc was updated but I couldn't get it to work on a few different distros. The issue is when you do ``` pip install psycopg2-binary<2.9 ``` your shell (sh, bash, zsh or whatever) interprets `<2.9` as an input redirection and probably says something like `2.9: No such file or directory`. You need to do something like ``` pip install psycopg2-binary\<2.9 ``` or ``` pip install 'psycopg2-binary<2.9' ``` I'll update the doc. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

2 years, 11 months

[MM3-users] Re: Is there a way to find out when a user subscribed to a list

by Mark Sapiro

On 4/17/24 15:14, Mark wrote: > You can query the mailman database ... > > select email, registered_on,verified_on from mailman.public.address > where email = 'mmasoudf(a)aaas.org' > > > On 2024-04-18 03:19, Mohsen Masoudfar wrote: >> Hi, >> We need to find out when a specific user joined a list. Is there a way >> to get this information? Querying the database in that way is not reliable. Yes, it is correct that the user has both a user record and an address record, and the user record has a created_on date and the address record has both registered_on and verified_on dates, but those are only the creation/verification dates for those records. They are not necessarily the date that that user/address subscribed to any list. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

1 year, 2 months

[MM3-users] Re: Held messages showing a reason not in English on the Postorious

by Mark Sapiro

On 6/25/24 20:13, Alan KT So (ITSC) wrote: > We just notice a held message from a user's list showing the held reason in Ukrainian, but the interface is in US English and the list's preferred language is English (USA). We could not repeat the issue. What can be the reason behind? > > [cid:image001.png@01DAC7B9.AF2B0400] I'm assuming the image that content filtering removed was a screen shot of the held message view in Postorius. was the sender of the message a list member with preferred language Ukranian? There may be an issue here. The line at https://gitlab.com/mailman/mailman/-/blob/master/src/mailman/chains/hold.py… calls format_reasons which will translate the reasons in whatever the current language context is. It should probably explicitly specify the list's preferred language. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

1 year

[MM3-users] Re: Header settings and Gmail

by Mark Sapiro

On 7/29/24 12:25, erik(a)dante.de wrote: > > As a preventive measure, it helps to use DMARC mitigation action with “Replace From: with list address” and “ DMARC Mitigate unconditionally ”. But now some users are unhappy with the From header " Username via Test-liste <test(a)test-liste.org>". They would rather have their email address in it. If your Mailman core version is >=3.3.9 you can add `^.*(a)gmail\.com` to dmarc_addresses (DMARC addresses in Postorius) to apply the mitigation to gmail.com addresses instead of unconditionally, but this won't help your gmail users. > Is there a solution with which Google delivers the mailing list messages without complaining, but the sender email address is also in the “From:”? No. This is just one example of Google/gmail behaving oddly. gmail.com publishes a DMARC policy of none, yet they require incoming email From: the gmail.com domain to pass DMARC -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

11 months

[MM3-users] Re: Language confusion in held mail notifications

by Mark Sapiro

On 9/22/21 2:16 AM, Henrik Rasmussen wrote: > I just upgraded from Mailman 3.2.0 (La Villa Strangiato) to Mailman 3.3.4 (Tom Sawyer) - Docker Mailman v0.3.12. As the language is not possible to set, and the default language is English, I set my user profile to Spanish and the list config to German, to figure out where the changes would take affect. > > After sending a mail to the list as the moderated list user, the resulting notification returned to the users email address is mostly in German, but the reason indicated is in Spanish "El mensaje proviene de un miembro moderado". I am unable to duplicate this in Mailman 3.3.5rc1. I set the list's language to German and a moderated user's language to Spanish. The held message notice to the user was entirely in Spanish and the notice to the admin was entirely in German. User Notice --------------------------------------------------- Date: Thu, 23 Sep 2021 17:12:50 -0700 From: test-bounces(a)msapiro.net To: mark(a)msapiro.net Subject: Su mensaje a test(a)msapiro.net espera la aprobación del moderador Su mensaje a la lista 'test(a)msapiro.net' con el asunto A test message Ha sido retenido hasta que el moderador de la lista pueda revisarlo y aprobarlo. El mensaje está siendo retenido por: El mensaje proviene de un miembro moderado O bien el mensaje será enviado a la lista, o bien recibirá una notificación con la decisión del moderador. --------------------------------------------------------------- Owner Notice -------------------------------------------------- Date: Thu, 23 Sep 2021 17:12:50 -0700 From: test-owner(a)msapiro.net To: test-owner(a)msapiro.net Subject: Der Beitrag test(a)msapiro.net von mark(a)msapiro.net muss genehmigt werden [-- Attachment #1 --] [-- Type: text/plain, Encoding: base64, Size: 0.5K --] Ihre Einwilligung als Administrator*in ist für folgende Nachricht an die Mailingliste nötig: Liste: test(a)msapiro.net Absender: mark(a)msapiro.net Betreff: A test message Die Nachricht wurde aus folgenden Gründen zurückgehalten: Die Nachricht kommt von einem moderierten Mitglied Besuchen Sie die Administrations-Seiten, um die Nachricht anzunehmen oder abzulehnen. [-- Attachment #2 --] [-- Type: message/rfc822, Encoding: 7bit, Size: 0.8K --] Date: Thu, 23 Sep 2021 17:12:48 -0700 From: Mark Sapiro <mark(a)msapiro.net> To: test(a)msapiro.net Subject: A test message User-Agent: Mutt/1.9.4 (2018-02-28) Give this a try. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan [-- Attachment #3 --] [-- Type: message/rfc822, Encoding: 7bit, Size: 0.9K --] Date: Thu, 23 Sep 2021 17:12:50 -0700 From: test-request(a)msapiro.net Subject: confirm b903b34955e0268e33b011ff9c9ccb7667dce4f2 Wenn Sie auf diese Nachricht antworten und den Subject: Header unverändert lassen wird Mailman die zurückgehaltene Nachricht verwerfen. Tun Sie dies, wenn es sich bei der Nachricht um Spam handelt. Wenn Sie auf die Nachricht antworten und einen Approved: Header mit dem Listenkennwort einfügen, wird Nachricht für die Veröffentlichung auf die Liste genehmigt. Der Approved: Header kann auch in der ersten Zeile des Textes der Antwort erscheinen. --------------------------------------------------------------- -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

3 years, 9 months

[MM3-users] Re: no mails to list members

by Mark Sapiro

On 1/4/19 6:49 AM, Thomas Stein wrote: > > While we`re at it. Is /var/lib/mailman3/templates/lists/$listname the right location for customized templates? There are multiple ways to reference templates, but just putting them in that location should work. > Should > I name the template list:member:generic:footer.txt or list_member_generic_footer.txt? Your list was created with an older version of import21. That version named the templates it stored with underscores rather than colons and set the URI for that template to use the underscore name. Thus, without changing the URI for the template, you need to continue to use the underscore name for those templates, but for other templates, you can use the name with colons and not worry about the URI. > Is there some documentation > what variables i can put in those templates? See <https://mailman.readthedocs.io/en/latest/src/mailman/rest/docs/templates.ht…>. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

6 years, 5 months

[MM3-users] Re: Delete Django profiles not signed up to a list

by Mark Sapiro

On 2/8/21 1:22 AM, r.woithe(a)callassoftware.com wrote: > Hello, > > i did try the script and unfortunately there is a problem. The script is deleting django-users are not member,nonmember ... of any lists.But thats not the point. Its ok if a user want to be only a django-user to see the archives and work with them. If a user sign's up for an account at /accounts/signup/ and then confirms her address, she will then be a Mailman user with a user and an address record even though not a member of any lists. > The script should delete django-users who dont confirm your email address. Change one line in the script from ``` if mm_user is None or len(list(mm_user.memberships.members)) == 0: ``` to ``` if mm_user is None: ``` And it will do what you want. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

4 years, 4 months

Search results for query "sapiro"