Search results for "sapiro" - lists.mailman3.org

[MM3-users] Re: Is there a way of recording bounce messages?

by Mark Sapiro

On 9/21/23 15:01, Andrew Hodgson wrote: > Mark Sapiro <mark(a)msapiro.net> wrote: > >> Can you provide one of the bounce report messages and the corresponding bounce message from the MTA log. > > I only have the message I would get as the owner of the list that the delivery has been disabled, That's the one I'm interested in. If possible I'd like to see the actual raw message, not some MUAs rendering of it. > I don't have the original bounce message. One thing to note is the bounce messages coming in from Gmail are being generated by Office 365 (as that is the outbound smarthost for the Mailman server), so it may be due to the format of those NDRs why we aren't seeing the original bounce messages attached to the email. So as I understand it, Office 365 is sending the mail to the gmail recipient which is presumably rejecting the mail at SMTP with a 5xx status. Does Office 365 report the failure to Mailman with a failure status at SMTP time or later with an emailed DSN. If the former, there should be log messages in Mailman's smtp.log indicating the number of failures '$msgid post to $listname from $sender, $size bytes, $refused failures' and the reason for each '$msgid delivery to $recip failed with code $smtpcode, $smtpmsg'. Also, we create a fake DSN. See https://gitlab.com/mailman/mailman/-/blame/master/src/mailman/runners/outgo… If the latter we have the DSN from Office 365. In either case, the DSN should be attached to the notice. I don't know why it wouldn't be. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

2 years, 7 months

[MM3-users] Re: Delete User

by Mark Sapiro

On 05/25/2018 03:14 PM, Kaleb White wrote: > Where exactly is the Django admin interface? > > I can't find it. It's not this, is it? > https://lists.mailman3.org/user-profile/ If you're looking for it on lists.mailman3.org it's at <https://lists.mailman3.org/admin> but you won't be able to log in there. In another installation you would look in urls.py for the list of urlpatterns for something like # Django admin url(r'^admin/', admin.site.urls), If you are authorized to create domains, on the Add a new domain page, the description of Web Host says in part "This can be same or different from the Mail Host. You can edit the list of available web hosts here." and 'here' is a link into the admin interface. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

7 years, 11 months

[MM3-users] Re: Removing banned emails

by Mark Sapiro

On 08/02/2018 11:47 AM, Kaleb White wrote: > I am trying to remove a banned email with a special character via the rest api and it's not working. It's also not working via the UI. Any ideas? > http://localhost:8001/3.0/lists/example.com/bans/provisor#41@bankofamerica.… > <Response [404]> You can't do it from Postorius (This should be considered a bug in Postorius or perhaps mailman-client). You can do it via rest if you URL encode the request as http://localhost:8001/3.0/lists/example.com/bans/provisor%2341@bankofameric… The issue is whatever client is making the HTTP request is considering '#41(a)bankofamerica.com' to be a fragment identifier so it issues the request for the resource '3.0/lists/example.com/bans/provisor' and expects to find sub-resource identified by '41(a)bankofamerica.com' in the response. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

7 years, 9 months

[MM3-users] Re: Whitelist non subscriber

by Mark Sapiro

On 08/06/2018 06:43 AM, Stephan Krinetzki wrote: > The steps are as follows, right? > - Add users to the list and give the role "nonmember" > - Set moderation action ('defer' or 'accept') Right. > The only thing missing in the documentation is a note on how to do this via the Admin API. Who can explain that to me? Can you be more specific about what you are looking for? If by "Admin API" you mean the REST API, are you asking how to interact with it or what specific POST/PUT/PATCH commands to send? Or are you asking about the 'mailman shell' command? Also, we want to expose the nonmember role in Postorius and enable setting moderation action for nonmembers, but we didn't get that in MM 3.2/Postorius 1.2. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

7 years, 8 months

[MM3-users] Re: Changing default message limit (max_message_size)

by Mark Sapiro

On 5/27/19 12:05 AM, roger(a)reasonal.com wrote: > I found the field in settings that would appear to do this, but it just throws an error for whatever I give it ("An error occured**: Unknown attribute: max_message_size"). This should be fixed at <https://gitlab.com/mailman/mailman/merge_requests/329>. Perhaps you need to update your Docker images <https://asynchronous.in/docker-mailman/> Also, see <https://gitlab.com/mailman/postorius/issues/246#note_69323948> for a not about changing this via `mailman shell` (withlist), but see the subsequent comment about `quit()` > PS As a suggestion, may be a good idea to indicate what units it's expecting... bytes? kB? Nybbles? Reported at <https://gitlab.com/mailman/postorius/issues/362>, thanks. > PPS ** Psst: occurred with two r's... Reported at <https://gitlab.com/mailman/postorius/issues/361>, thanks. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

6 years, 11 months

[MM3-users] Re: Cannot show archives

by Mark Sapiro

On 9/27/19 2:09 AM, qiuhong su wrote: > > After check MTA settings, still cannot resolve this issue. > I create a new list "list1", and after subscribe it, send an email to list1(a)example.com > And then check ./var/archives/hyperkitty/spool/, ./var/messages > Both are empty. > Click "Archives" it will access http://example.com/hyperkitty/, and show "No archived list yet." > Could you help me? The list appearing in HyperKitty depends on the Django Admin job new_lists_from_mailman which should run hourly. See <https://docs.mailman3.org/en/latest/config-web.html#scheduled-tasks-required>. Is your test message delivered to the members of list1(a)example.com. If not, what's in your MTA logs? Have you set up your MTA's configuration as described at <https://mailman.readthedocs.io/en/latest/src/mailman/docs/mta.html>? -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

6 years, 7 months

[MM3-users] Re: File "/usr/lib/python2.7/httplib.py", line 1148, in getresponse raise ResponseNotReady()

by Mark Sapiro

On 9/21/20 6:21 AM, r.woithe(a)callassoftware.com wrote: > Hello, > Version: > Mailman Core Version GNU Mailman 3.2.2 (La Villa Strangiato) > Mailman Core API Version 3.0 > Mailman Core Python Version 3.8.2 (default, Jul 16 2020, 14:00:26) [GCC 9.3.0] > > But the Error was there allready before the update have been done. That means the Mailman-Core changed but the error persisted. What is the full traceback from this error? Mailman 3 has not supported Python 2 since 3.0 beta4. It is not clear what is invoking /usr/lib/python2.7/httplib.py, but if it is Mailman core, something is seriously amiss in the way it's installed. Even Postorius and HyperKitty have not supported Python 2 for quit some time. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

5 years, 7 months

[MM3-users] Re: Newbie question 2: Rewriting issue for bounced emails

by Mark Sapiro

On 12/26/21 6:05 PM, William Oliver wrote: > > So.. if I need to do it myself, can you point me to what file I need to > create/modify in the /opt/mailman/mm tree to set up the alias? Assuming you have Postorius working, just go to the Domains view, edit your domain and add an Alias Domain. Otherwise, you can do this in mailman shell, e.g. ``` $ mailman shell Welcome to the GNU Mailman shell Use commit() to commit changes. Use abort() to discard changes since the last commit. Exit with ctrl+D does an implicit commit() but exit() does not. >>> dm = getUtility(IDomainManager) >>> d = dm.get('example.com') >>> d.alias_domain = x.example.com >>> commit() ``` -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

4 years, 4 months

[MM3-users] Re: Still unable to get mailman3 working on Ubuntu 20.04 LTS

by Mark Sapiro

On 1/6/22 10:21 AM, Michael Heseltine wrote: > > Btw, I the ProxyPass(Reverse) supposed to point at the URL listed in MAILMAN_REST_API_URL? Because that one is set to port 8001 in settings.py, and if I try to "telnet localhost 8000", i get "Connection refused". No. You probably don't need ProxyPassReverse at all, but it doesn't hurt and it should be the same URL as in ProxyPass. Port 8001 is Mailman core's REST server and that is what's in MAILMAN_REST_API_URL. Port 8000 is your wsgi server. The HowTo you're following tells you to install and configure gunicorn and it should be running and listening on port 8000 as it's what receives the proxied requests from Apache. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

4 years, 4 months

[MM3-users] Re: Mailman and Mailman-web databases

by Mark Sapiro

On 4/5/23 02:31, Andrew Hodgson wrote: > > In these instructions we are using 2 databases for the Mailman and Django components. I guess it doesn't harm anything to have just one database for both but wondered whether it was a good idea to split eventually? It is mostly a matter of taste. There is no conflict in tables between Mailman core and Django, so it's perfectly OK to use a single database. Splitting the databases enables more separation between Django and Mailman core and would possibly make it easier to run them on different servers if that was desired. It would even allow using different database managers for them, although I don't know why one would want that. FWIW, this list's server uses a single database. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

3 years, 1 month

Search results for query "sapiro"