Search results for "sapiro" - lists.mailman3.org

[MM3-users] Re: check/update delivery status via python script

by Mark Sapiro

On 7/19/22 12:49, Eggert Ehmke wrote: > Somehow I can't get the starting point in the documentation to do stuff like this. > Besides, when I try to run examples from > https://docs.mailman3.org/projects/mailman/en/release-3.0/src/mailman/comma… > I run into errors like > > AttributeError: 'Withlist' object has no attribute 'process' You should see the latest version of that doc at https://docs.mailman3.org/projects/mailman/en/latest/src/mailman/commands/d… It might be a bit more clear, plus at least some of the examples at https://docs.mailman3.org/projects/mailman/en/release-3.0/src/mailman/comma… don't work with mailman core >= 3.2. Where did you find the link to https://docs.mailman3.org/projects/mailman/en/release-3.0/? -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

3 years, 9 months

[MM3-users] Re: what process creates webui tables (mailmanweb db)?

by Mark Sapiro

On 9/26/22 21:18, tflatley(a)gmail.com wrote: > 3) client requirements did not allow for venv - i needed to install packages using apt Did not allow for a venv or required a package? If the only issue was the use of a venv, you can install Mailman in the same way without creating/activating a venv, and I think that would still be preferable to using the Debian/Ubuntu packages. > 4) so the questions i was asking on this forum were to understand differences between the venv method ( which i ran successfully ) and using packages , which presented some challenges Note that when you use a downstream package, your primary support resource should be the packager who presumably is more familiar with that package than we are. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

3 years, 7 months

[MM3-users] Re: Setup Question: Disk-Layout (Migrating from Mailman 2.1)

by Mark Sapiro

On 4/17/25 10:20 AM, Mihai Moldovan wrote: > > Now... is there a way to import mbox files into the prototype archiver? > Looking around, I haven't found anything mentioning this. Since it's > just using the Maildir format, I guess I could find a tool that unpacks > messages from an mbox to a Maildir destination and get that done, but if > mailman has some command to do that, it would be even better. There is no Mailman command to do this, but a Python script is very simple. Something like ``` from mailbox import Maildir, mbox mb = mbox('path/to/mbox', create=False) md = Maildir('path/to/maildir', create=False) for msg in mb: md.add(msg) mb.close() md.close() ``` -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

1 year

[MM3-users] Re: exim4 + mailman3 lmtp failure

by Mark Sapiro

On 5/6/20 10:54 AM, Thomas Drillich wrote: > Hello, > > I tried to setup exim4 + mailman3 but it seems to stuck at lmtp delivery of mailman3. > Could you give me a hint, to detect the reason of failure ? ... > # /etc/exim4/conf.d/transport/55_mm3_transport > mailman3_transport: > driver = smtp > protocol = lmtp > allow_localhost > hosts = localhost > port = MM3_LMTP_PORT > rcpt_include_affixes = true Have you defined MM3_LMTP_PORT and is it the same value as the lmtp_port: setting in the [mta] section of mailman.cfg - default 8024? And is Mailman core and particularly its lmtp runner running and is it listening on the relevant port? Is there more information about "all hosts for 'listen.td3.eu' have been failing for a long time" in exim's logs? -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

6 years

[MM3-users] Re: Mailman archive issues (Hyperkitty)

by Mark Sapiro

On 6/3/21 1:06 AM, Kimmo L wrote: > Thanks for the quick replay! > If its not a big trouble, could you kindly give me some advice/guide how upgrade my Hyperkitty/Postorius/Django from python2 to python3. > I would be very grateful. It depends heavily on how Mailman was installed to begin with, but essentially you just upgrade the various components to the latest versions using pip. Some things you need to be aware of are at https://docs.mailman3.org/en/latest/upgrade-3.2.html > These segfaulting alerts appers the same time when i see "ERROR reincarnated worker Process-1:53 after death" entry in uwsgi-error.log. > So it seems that they are dependent on each other. It could very well be an out of memory issue and upgrading may solve it. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

4 years, 11 months

[MM3-users] Re: "Unsubscribe all" button

by Mark Sapiro

On 10/20/22 17:32, Philippe B wrote: > Would it be possible to add a confirmation screen after you click on it? Like: WARNING! Clicking "Confirm" will empty the list of all its existing members, regardless of what was entered on the previous screen. That operation cannot be reversed. Are you absolutely sure that you want no one to be on your list anymore? There is a confirmation screen although it is not as strongly worded as you suggest. See https://gitlab.com/mailman/postorius/-/issues/545 for a discussion of this. There are screenshots there showing revised button labels and rearranging the cancel/remove buttons on the confirmation page. These changes have not been implemented as yet because I didn't think there was a clear direction. Please look at that issue and comment there. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

3 years, 6 months

[MM3-users] Re: I'm seeing a lot of database locked errors

by Mark Sapiro

On 9/18/23 11:19 AM, bryan.kartzman(a)yu.edu wrote: > And they do have the same thread_id as well: > > select a.id, b.starting_email_id, a.message_id_hash, b.thread_id > from hyperkitty_email a,hyperkitty_thread b > where a.message_id_hash = b.thread_id > and a.id = b.starting_email_id > and a.id in (1365,1366) ; > > id | starting_email_id | message_id_hash | thread_id > ------+-------------------+----------------------------------+---------------------------------- > 1365 | 1365 | UB4WSRNRTPBH7XB6RF3W42U2MUDK77S7 | UB4WSRNRTPBH7XB6RF3W42U2MUDK77S7 > 1366 | 1366 | UB4WSRNRTPBH7XB6RF3W42U2MUDK77S7 | UB4WSRNRTPBH7XB6RF3W42U2MUDK77S7 > (2 rows) This is interesting. There are two entries in the hyperkitty_email table for the same message. Are the other fields, particularly `content`, for these ids in the hyperkitty_email table the same? If so, I'd be inclined to ``` delete from hyperkitty_email where id = 1366; delete from hyperkitty_thread where starting_email_id = 1366; ``` -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

2 years, 7 months

[MM3-users] Re: Only Recent archive tab works after mailman upgrade

by Mark Sapiro

On 8/4/24 23:39, zoltan(a)circle-interactive.co.uk wrote: > Hi, > > since I upgraded mailman to 3.3.9 (python 3.11.2) > I have an odd issue on lists' archive page. > Apparently only the Recent tab works. > If I switch to Active or Popular I see the change in the url but page content does not refresh. > I can not see any errors in browser console and in logs so I am quite clueless how to debug further :( Mailman core has nothing to do with this. Did you upgrade HyperKitty, and if so, from what to what? See https://gitlab.com/mailman/hyperkitty/-/blob/master/hyperkitty/templates/hy… - I don't know why this wouldn't be working in your case. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

1 year, 9 months

[MM3-users] Re: translating templates (was: Re: spanish localization)

by Mark Sapiro

On 2/15/21 2:38 AM, Guillermo Hernandez (Oldno7) via Mailman-users wrote: > On 13/2/21 20:00, Mark Sapiro wrote: >> Also note that the translations on weblate only affect strings in the >> core code. The Mailman core templates are not currently translated in >> weblate and there are currently no Spanish language templates. One would >> need to create Spanish translations of all the templates in >> <https://gitlab.com/mailman/mailman/-/tree/master/src/mailman/templates/en> >> >> and submit a merge request to add them to a mailman/templates/es/ >> directory. > > I downladed the templates and I'm beginning the translation process, but > I have a question. What language map has to be used? In my S.O. it's > ISO-8859-15 but I'm concerned it has to be UTF-8... Better ask before > having to do a remapping of the files after... They should be encoded as UTF-8. > It comes to my attention that three files have 0 bytes. The 0-byte files can either be left out of templates/es or put in as empty files. They are things for templates which are empty by default. Also, help.txt is unused and doesn't need to be translated. At one time it was intended to be the template for the response to the email `help` command, but it is not used for that purpose. Finally, although I said previously that the translated templates should be submitted as a merge request, that can still be done, but is not necessary. They can be translated in weblate. See <https://lists.mailman3.org/archives/list/mailman-users@mailman3.org/message…> and <https://gitlab.com/mailman/mailman/-/issues/825>. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

5 years, 2 months

[MM3-users] Re: Setup Mailman 3 using Apache/Mod_WSGI

by Mark Sapiro

On 08/03/2017 07:16 PM, Stephen J. Turnbull wrote: > > On the other hand, you need to tell WSGI where > the Django project (mailman-suite_project?) lives. I use a different > syntax: > > WSGIDaemonProcess site python-path=/home/django/project user=django group=django display-name=django And on the apache/MM3/mod_wsgi site I support, I have WSGIDaemonProcess mailman-web display-name=mailman-web maximum-requests=1000 umask=0002 user=mailman group=mailman python-path=/opt/mailman/mailman-bundler/venv/lib/python2.7/site-packages home=/opt/mailman/mailman-bundler/var I also have WSGIScriptAlias /mm3 /opt/mailman/mailman-bundler/bin/mailman-web.wsgi <Directory "/opt/mailman/mailman-bundler/bin"> <Files mailman-web.wsgi> Order deny,allow Allow from all Require all granted </Files> WSGIProcessGroup mailman-web </Directory> Which is essentially what the OP has with the addition of WSGIProcessGroup mailman-web -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

8 years, 9 months

Search results for query "sapiro"