Search results for "sapiro" - lists.mailman3.org

[MM3-users] Re: New install - The Message have no valid senders

by Mark Sapiro

On 3/31/22 00:44, kenneth.karlsson(a)eco.cept.org wrote: > I found a solution, i inserted > > always_add_missing_headers = yes > > in main.cf of postfix. > That seems to make the mail go through. I still dont get why it failed as the From: field was there. There was no From: header in your example. There was an envelope from, aka envelope sender, aka unixfrom, so it should not have failed. The mystery here is why the code at https://gitlab.com/mailman/mailman/-/blob/master/src/mailman/runners/lmtp.p… apparently failed to set the `MAIL FROM:` value. However, I think it's all moot because your test sent a message without any headers. A real post would probably have a From: header. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

4 years, 1 month

[MM3-users] Re: Debian Package Install - Ownership and Permissions

by Mark Sapiro

On 4/7/23 13:43, Odhiambo Washington wrote: > On Fri, Apr 7, 2023 at 8:09 PM Andreas Schamanek < > as2020+github(a)fam.tuwien.ac.at> wrote: >> >> I am running MM2 und 3 in parallel without problems, I do have a >> special MTA setup though (Sendmail). Can't speak for Postfix etc.. >> > > Your setup can handle list1(a)domain1.name via MM2 and MM3, simultaneously, > right? :-) It is possible to have an MM2 `list1` and an MM3 `list1(a)domain1.name` simultaneously on the same server, but what is the MTA going to do with incoming mail to `list1(a)domain1.name`. I suppose it could deliver it to both MM2 and MM3, but I don't see any practical use case for this. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

3 years, 1 month

[MM3-users] Re: MM3 Postfix FROM header issue

by Mark Sapiro

On 12/16/23 8:00 AM, eboltz(a)lhtservices.com wrote: > Installed MM3 on Debian 11, followed the steps from the MM3 website. > > I'm running into issues with Postfix headers. I can only get postfix to send emails to/from the list if I set the sender_canonical_maps in the main.cf file. I don't want to have to use that as I'd like the recipient to receive the following in their email header: <Subscriber> via <List Name> <FROM:LIST@DOMAIN>. But if I do the sender_canonical_maps, then the <FROM:LIST@DOMAIN> and all email headers are overwritten by the maps email address. In Postorius -> Settings -> DMARC Mitigations set DMARC mitigation action to Replace From: with list address and DMARC Mitigate unconditionally to Yes. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

2 years, 4 months

[MM3-users] Re: Is it possible to upgrade from Debian 11 to Debian 12 with Mailman3?

by Mark Sapiro

On December 20, 2023 7:20:17 AM GMT, Pierre Malard via Mailman-users <mailman-users(a)mailman3.org> wrote: >Ok, don’t throw any more away! > >If you really don't recommend the Debian packaged solution, I just have one question: >Why have you included it in the Debian "main" repositories for so long? We have no control over what's in Debian repositories. Maintenance and distribution of the Debian packages is done by Debian. We would love it if all the downstream distributions included up to date and bug free Mailman packages. The problem is when people encounter difficulty with a downstream package, we are often unable to help because we don't know the details of that package. -- Mark Sapiro <mark(a)msapiro.net> Sent from my Not_an_iThing with standards compliant, open source software.

2 years, 4 months

[MM3-users] Re: Internal Server Error: /mailman3/accounts/fedora/login/

by Mark Sapiro

On 12/2/24 2:30 PM, Alain D D Williams wrote: > Twice today I have received many (50+) emails like the one below. > > Many at about 1pm, then it stopped now I am getting them again. > An Internet search does not bring up anything useful. This is similar to https://lists.mailman3.org/archives/list/mailman-users@mailman3.org/thread/… although the URL is different. I see these from time to time on this list, although I don't get the emails from Django, probably because I don't define EMAIL_HOST in Django's settings. See https://docs.djangoproject.com/en/5.1/howto/error-reporting/ The bottom line is this is some kind of script kiddies attack, but the query fragment in the URL is malformed and causes the error. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

1 year, 5 months

[MM3-users] Re: Error when sending customized welcome message template

by Mark Sapiro

On 3/13/25 2:54 PM, Markus Grandpré wrote: > Dear List, > > As soon as a template "[list:user:notice:welcome]" exists, and at least > one email address is provided during mass subscribe, while sending an > invitation is disabled and sending a welcome message is enabled, the > following error occurs: > > HTTP Error 400: ('Connection aborted.', ConnectionResetError(104, > 'Connection reset by peer')) Was this template set in Postorius? If so, there is an issue with your setting for POSTORIUS_TEMPLATE_BASE_URL. The default is ``` POSTORIUS_TEMPLATE_BASE_URL = http://localhost:8000/ ``` which should work if your wsgi server is listening on the local host, port 8000, but setting it to the base scheme and host you use to access Postorius is generally good. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

1 year, 1 month

[MM3-users] Re: Functionailty of web host domains

by Mark Sapiro

On 06/15/2018 12:37 PM, Johannes Winter wrote: > > For each domain you can specify a "web host". But when I specify a > different one than the default for one domain, and make it accessible > with specifying `DJANGO_ALLOWED_HOSTS`, all mailinglists from the other > web hosts are also shown when I access the second site. > > So does this 'web host' option have a meaning, or is it just an alias > for the first site? This is a 'site' as implemented in Django <https://docs.djangoproject.com/en/2.0/ref/contrib/sites/>. I.e., it provides ways to do different things or retrieve different content based on site, but I don't see that either Postorius or HyperKitty makes use of it in this way. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

7 years, 10 months

[MM3-users] Re: Selective mailing

by Mark Sapiro

On 2/26/19 2:39 PM, chucka(a)blackforest-co.com wrote: > I'm trying to find out if I move my web site to a hosting company > using MM Ver 3 - with SQL. If I have a membership list in MySql used by MM > - can I send an email to a select group? ["Your dues are due"]. > > Assumes the MM tables can be accessed? Anyhow what I want to do is: > send message96 where expire > next month > else > send message95 Even if The particular Mailman instance uses MySQL for its database, the tables are very specific to Mailman. It is not possible to tell Mailman that some arbitrary membership table or the result of some arbitrary query is to be used to determine the recipients of a message. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

7 years, 2 months

[MM3-users] Re: Timeout in Postorius when trying to approve or reject moderated messages

by Mark Sapiro

On 8/27/20 8:07 AM, Sebastian Hagedorn wrote: > > Right now everything is running as root (except for Apache). I realized > too late that I should've used a mailman user. Could that be the reason > for the issue? Since you have determined it was a browser issue, that probably isn't the reason, but running Mailman as root is a bad idea in general for security reasons. I don't know if it's relevant or not, but I have just recently had issues with Firefox not working properly on two different (not mailman) web sites, and these issues were fixed by clearing cookies and cached data from the affected sites and restarting Firefox. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

5 years, 8 months

[MM3-users] Re: What's the difference between (purpose of) reject and ignore

by Mark Sapiro

On 6/23/22 12:37, denis.bitouze(a)univ-littoral.fr wrote: > Hi, > > at a page of the form .../postorius/lists/mylist/held_messages, it is > possible to: > > - Accept > - Reject > - Ignore What is the Postorius version and is it installed from source, pip or as package and if as package, what package? The choices should be Accept, Reject and Discard. There should be no Ignore choice, but I'm guessing you see them in French where the translation of Discard is Ignorer. See https://gitlab.com/mailman/postorius/-/blob/master/src/postorius/locale/fr/…. The difference between Reject and Discard is Reject notifies the sender of the rejection whereas Discard just discards the message without notification. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

3 years, 10 months

Search results for query "sapiro"