Search results for "sapiro" - lists.mailman3.org

[MM3-users] Re: import an mm3 hyperkitty archive

by Mark Sapiro

On 12/7/22 05:57, Eggert Ehmke wrote: > I was able to export the archive of my old mm3 installation in hyperkitty. > However, I seem to be blind when looking for hyperkitty_import in the > documentation. Where to start? There is documentation at <https://docs.mailman3.org/projects/hyperkitty/en/latest/development.html#im…> and also at <https://docs.mailman3.org/en/latest/migration.html#upgrade-strategy>. You can also run `django-admin hyperkitty_import --help`. The docs refer to importing messages from MM 2.1, but you can import messages from any unix like mbox file. Note in the above, `django-admin` is the command you use to invoke Django's management which may be `django-admin`, `manage.py`, `mailman-web` or something else depending on how Mailman is installed. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

2 years, 5 months

[MM3-users] Re: Sending a message to a subscription applicant when a subscription request is made

by Mark Sapiro

On 3/28/23 01:49, Allan Hansen wrote: > > There is a template, 'list:user:action:subscribe' that almost does this, but it gets sent only if the email address of the applicant is unverified. A good number of our applicants are already on our lists, so they would not get this template if we set the Subscription Policy to 'Confirm, then moderate'. > > Our Subscription Policy is currently: 'Moderate' for all lists. If you set the subscription policy to 'Confirm, then moderate' the user will receive a confirmation request based on the list:user:action:subscribe template whether or not the address is verified. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

2 years, 1 month

[MM3-users] Re: Template - "You can use these variables in the templates" - The variable for "leave" is missing

by Mark Sapiro

On 11/3/23 01:28, Wikinaut wrote: > I suggest to add this is as a new variable $leave_email . > > By the way: how can I access the _short_ list description text as a variable? See https://docs.mailman3.org/projects/mailman/en/latest/src/mailman/rest/docs/… for information on the variables that can be used in templates. There you will see the variable for "the mailing list’s short description text" is `description`. This is missing from the list displayed in Postorius which needs updating for this and other reasons, e.g. $hyperkitty_url is only available in regular headers and footers. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

1 year, 6 months

[MM3-users] Re: Moderation action "None" is misleading

by Mark Sapiro

On 2/4/25 02:51, Markus Grandpré wrote: > Dear List, > > I find the use of the term 'None' (or 'Kein' in the German translation; > see attachments) in the 'Moderation action' column of the member list > misleading, as the term suggests that no moderation action is applied to > the respective member. > > However, this is not necessarily the case. If you check a member’s > "Administration options / Moderation" setting, a moderation action, such > as "Moderation" or "List default", may be in effect. This is https://gitlab.com/mailman/postorius/-/issues/577 fixed in Postorius 1.3.9 by https://gitlab.com/mailman/postorius/-/merge_requests/811 See the UI changes at https://docs.mailman3.org/projects/postorius/en/latest/news.html#news-1-3-9 -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

3 months, 1 week

[MM3-users] Re: Hyperkitty 1.1.1 to HyperKitty 1.2.1

by Mark Sapiro

On 10/04/2018 03:49 AM, Thomas G wrote: > I tried all job, without result. > (and they are correctly in the crontab) > > [image: image.png] > > If I try to find my list in the form, hyperkitty can find it: > > [image: image.png] Since you are a gmail user, you probably didn't see that content filtering removed your screen shots, but see your post at <https://lists.mailman3.org/archives/list/mailman-users@mailman3.org/message…>. I did in fact see your screen shots in my direct copy, but I am unable to determine what your issue is except there may be some domain confusion between mailing.hatlab.fr and hatlab.fr. Are your list settings set for Public archives and hyperkitty active? -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

6 years, 7 months

[MM3-users] Re: digests are created but not sent out

by Mark Sapiro

On 1/9/19 12:02 PM, "Jörg M. Schulz" wrote: > start fails when I use > > > # The default language for this server. > default_language: en > [language.en] > charset: utf-8 > enabled: yes > > when I comment out the lines above, mailman starts. And in what section is this put? I.e. if the last preceding section header is not [mailman], the default_language: en is in a section where it doesn't belong. Or are you saying that you had set the server default_language to something other than 'en' and the above is intended to change it to 'en'. In that case, look at var/templates/en and ensure it and subordinates are user:group list:list -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

6 years, 4 months

[MM3-users] Re: Compression error

by Mark Sapiro

On 8/16/19 7:18 PM, Andrew Bernard wrote: > I did a git pull today. Now I get the following error and the archives wont display: > > compressor.exceptions.OfflineGenerationError: You have offline compression enabled but key "b5ae52a1ebb585c556edceb45a148cb948b2a2673d133a340a90cd02fdd34828" is missing > from offline manifest. You may need to run "python manage.py compress". Here is the original content: > > Any clues? Did you do what it says, i.e. run "python manage.py compress" or however you spell your django admin command? It isn't always necessary, but I recommend that every time you do an update, you run all four of $DJANGO_CONTROL_SCRIPT collectstatic --clear --noinput --verbosity 0 $DJANGO_CONTROL_SCRIPT compress $DJANGO_CONTROL_SCRIPT compilemessages $DJANGO_CONTROL_SCRIPT migrate where $DJANGO_CONTROL_SCRIPT is the command to run django-admin or manage.py or however you spell it. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

5 years, 9 months

[MM3-users] Re: installation

by Mark Sapiro

On 11/22/20 5:38 PM, Henry S wrote: > Thanks Mark and Brian. I'll try the suggestions. > > My IP might have got blocked by CBL when testing mailman3 against a > Gmail address. I have since removed it from CBL. I don't know how my IP > got into the Outlook's block list. Maybe a used one. Will try DKIM > signing and Microsoft programs. Outlook and friends (Hotmail, Live, MSN. ...) can be a real pain. If you're not aware, start at <https://sender.office.com/>. Also, this requires patience. It may take several back and forth emails, some of which ask questions which have already been answered earlier in the quoted thread, but in every case where I've persisted, the block has ultimately been removed. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

4 years, 5 months

[MM3-users] Re: Hyperkitty CSS issue

by Mark Sapiro

On 6/14/20 1:48 PM, Ryan Morash wrote: > I migrated my existing mailman3 install from using the Debian packages to a virtualenv setup. For the most part everything seems to be running fine, but I'm running into an issue where Hyperkitty 1.3.3 is referencing an incorrect CSS file. It is trying to load "/static/CACHE/css/hyperkitty.39ef00cc7454.css" which does not exist. If I replace that reference (using my browser's dev tools) with "/static/CACHE/css/output.12a071da81b1.css" everything looks fine. I've ran the collectstatic, compress, and migrate commands successfully with no change. Any ideas on how to fix this? Have you tried running collectstatic with the --clear option or removing everything in STATIC_ROOT before running collectstatic?, See, e.g., <https://docs.djangoproject.com/en/2.2/ref/contrib/staticfiles/> -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

4 years, 11 months

[MM3-users] Re: changing default preferred language of list

by Mark Sapiro

On 3/29/22 13:01, Paul Paulchen wrote: > > As far as I understood, it should be pretty easy. My wish: every new list we create has a default value for the preferred language: de (instead of us) ... > We put the values in: > > [mailman] > default_language: de > > "/etc/mailman.cfg" and "/opt/mailman/mailman-extra.cfg" > Nothing changes. When I create a new list via Postorius, is see the preferred language is US. This is a bug in Mailman's REST API. I just created https://gitlab.com/mailman/mailman/-/issues/997 for this. Creating the list via `mailman create` sets the list's preferred language as expected, but creating it via the REST API whoch Postorius uses does not. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

3 years, 1 month

Search results for query "sapiro"