Search results for "sapiro" - lists.mailman3.org

[MM3-users] Re: Discard all mail with the subject "The resutls of your email commands"

by Mark Sapiro

On 9/28/20 7:43 AM, w.schoener(a)alp.dillingen.de wrote: > Hello Mark, > thank you for your hint. This is not my choice but is wanted by my collegues. I discussed it already... > > I commented out the line in command.py and the "result of email commands" mail still was send. > Exists there a kind of cache, or do I just have to wait some time, until this works? > Thank you so much, > Wolfgang Did you restart Mailman core? You need to do that. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

5 years, 7 months

[MM3-users] Re: Restore/export existing Mailman lists + hyperkitty archives on a new server

by Mark Sapiro

On 8/5/22 10:13, Kimmo L wrote: > Okay. Maybe i should to the same and replace my existing configuration with gunicorn. > Is it complicated to do that change ? I ask because this gunicorn term is quite new for me. You already have gunicorn installed because Mailman core uses it to support the REST interface. For configuration see https://wiki.list.org/DOC/Mailman%203%20installation%20experience. In particular, see the `Recommended Configuration` section items labeled `if using Gunicorn:` for sample gunicorn.conf and Script to start Gunicorn. Also, the `Web Server` and `Running Things` sections. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

3 years, 9 months

[MM3-users] Re: Mailman-web showing "An error occurred while processing your request."

by Mark Sapiro

On 2/9/23 07:57, C. Souza wrote: > > Just for curiosity, does anyone know the reasons for this kind of problem > and how to avoid it? Cause: Something in the specific email message. Avoidance: Possibly if we knew what the specific issue was or could see the held messages as displayed by the mailman shell script I provided, we could detect the issue and do something about it. Possibly Postorius could catch this and be more graceful about it, but again we'd probably need a message that triggers this issue. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

3 years, 2 months

[MM3-users] Re: Default templates

by Mark Sapiro

On 11/8/23 16:01, Steve Brown wrote: > I'm new to this list and newly a Mailman list administrator. I know I can customize message templates and have done so for my list's Welcome message. My problem is knowing what I'm replacing when I create a "new" template. How/where can I see he default content? The fact that Postorius doesn't show it to you is https://gitlab.com/mailman/postorius/-/issues/366 The defaults are in your installation at mailman/templates/en/ or in GitLab at https://gitlab.com/mailman/mailman/-/tree/master/src/mailman/templates/en or in the directory https://gitlab.com/mailman/mailman/-/tree/master/src/mailman/templates/ for other languages. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

2 years, 5 months

[MM3-users] Re: Disabled by bounce

by Mark Sapiro

On 2/2/23 04:54, Danil Smirnov wrote: > Hi Mark > > On Wed, Feb 1, 2023 at 9:28 PM Mark Sapiro <mark(a)msapiro.net> wrote: > >> Yes and no. If 'Bounce info stale after' is set to 3d and no bounces for >> a user are received in a 3 day period, the user's bounce score is not >> immediately reset, but it will be reset (to 1) the next time a bounce is >> received for the user. I.e., it is effectively the same thing unless you >> are looking at the user's bounce score which doesn't change until the >> next bounce. >> > > Isn't this a bug? We are now showing users' bounce scores on the Members > page and this would be misleading. Is it difficult from internals > perspective to have the bounce score reset immediately? Yes, it is not difficult, but it's a lot of processing. It would require something like a task runner task to periodically look at each row in the member table and if the bounce score is > 0, find the associated list's bounce_info_stale_after and if last_bounce_received + bounce_info_stale_after < now, reset the score. Consider a site like mail.python.org that at this moment has 79024 rows in the member table and 7531 of those have bounce_score > 0. That's a lot of processing, and is it really an issue to show a non-zero bounce score that's stale? -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

3 years, 3 months

[MM3-users] Re: Message does not appear in archive

by Mark Sapiro

On 08/30/2018 02:59 AM, Simon Hanna wrote: > > It is being archived. You can find it here > > https://lists.mailman3.org/archives/list/mailman-users@mailman3.org/thread/… > > You can see it listed here > > https://lists.mailman3.org/archives/list/mailman-users@mailman3.org/2018/8/ > > Hyperkitty has a "little" problem with caching and cache-invalidation... And various searches such as "forum" will also find it. It is unclear why it doesn't appear in the "Recently active discussions" list on the overview even though I've stopped and started qcluster, gunicorn (the wsgi server for Django) and mailman. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

7 years, 8 months

[MM3-users] Re: I have issue where it does not send emails on to people in the list I create.

by Mark Sapiro

On 4/30/20 1:09 PM, john_warland(a)hotmail.com wrote: > > I had been concentrating so much on the mailman suite config file as I was sure the answer was a setting in there that I didn't think to double check the mailman.cfg For what it's worth, The actual mail list management, i.e. receiving and delivering posts, only involves Mailman core and your mailman suite config file is only for Postorius and HyperKitty and doesn't affect Mailman core. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

6 years

[MM3-users] Re: Using it with the "smtp2go" email relay service that has special deliverability rules

by Mark Sapiro

On 1/19/23 06:03, golden_rock(a)hotmail.com wrote: > > To make it work, I would have to have something like: > > Sender: bounce-address(a)lists.mailman3.org - untouched > From: original.sender@gmail.com@lists.mailman3.org - change #1 having the From address to be From the list > Reply-To: original.sender(a)gmail.com - change #2 - if someone replies > > Then smtp2go will send the email. In Postorius Settings -> DMARC Mitigations set DMARC mitigation action to Replace From: with list address and set DMARC Mitigate unconditionally to Yes. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

3 years, 3 months

[MM3-users] Re: Debian Package Install - Ownership and Permissions

by Mark Sapiro

On 4/7/23 09:14, Dave Hall via Mailman-users wrote: > > I'm seeing an interplay between 'list' (the existing Mailman2 user), > www-data (the Apache user) and root. Given that it seems like almost > everything that's part of mailman3-web/django/hyperkitty is running in > uwsgi, should I maybe change /etc/mailman3/uwsgi.ini to use 'list' as the > uid/gid rather than www-data and then also change any user/group permission > to 'list' as well? With the Debian packages, all Mailman processes including Django, HyperKitty, Postorius, etc. should run as user `list`. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

3 years

[MM3-users] Re: Held messages not delivered after approval

by Mark Sapiro

On August 2025 1:22 a.m. Stephan Krinetzki wrote: > And then there is a logrotate: > ... > postrotate > if [ -f /opt/mailman/var/master.pid ]; then /bin/systemctl restart mailman.service > /dev/null; fi You should be aware that blindly restarting Mailman can result in duplicate messages to list members and possibly other issues. In particular if outgoing runner is processing a message and has already delivered one or more chunks to the MTA, a restart will cause outgoing runner to stop and upon restart, deliver to the entire recipient list resulting in duplicates for those recipients already sent to the MTA. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

9 months

Search results for query "sapiro"