Search results for "sapiro" - lists.mailman3.org

[MM3-users] Re: Disable response to the list request address

by Mark Sapiro

On 2/4/20 11:03 PM, Dieter Leupold via Mailman-users wrote: > Hi all, > > a short question (MM3.1.1): is it possible to avoid responses when > someone sends emails to the request-address (xxx-request(a)lists.xxxx.com) > of a mailinglist? > Thanks for your information! It is not currently possible. What responses are you trying to avoid? If you are interested in not responding to spam sent to the -request address, we could possibly implement a setting to not respond to messages that contain no valid commands and/or messages exceeding some maximum size. You could file an issue requesting this at <https://gitlab.com/mailman/mailman/issues>. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

5 years, 5 months

[MM3-users] Re: FILTER_VHOST fix - was: Postorius & multi domain

by Mark Sapiro

On 4/23/20 12:11 PM, Gelpi Andrea wrote: > > > I can confirm that the fix works. > > Thank You so much. Thank you for testing and reporting. Note I have just made one minor change to the fix. Where I had in the added code > if (MailDomain.objects.get( > mail_domain=domain.mail_host).site.name == web_host): I now have > if (MailDomain.objects.get( > mail_domain=domain.mail_host).site.domain == web_host): The issue is site.name is the domain's display name whereas the domain name is site.domain. This only matters if you have given the site a display name different from the domain name in Django. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

5 years, 2 months

[MM3-users] Re: Unable to remove non-member

by Mark Sapiro

On 9/28/20 6:43 AM, Brian Carpenter wrote: > Hi Everyone, > > I ran across a strange issue today. A client reported the inability to > remove a non-member in the following format: > > z_email/domain.org.za(a)domain.org.za > > The reported error from Postorius was: > > "The user could not be removed" Is that all it said? The code says it is The user could not be removed: <error message> Where <error message> is the relevant HTTP error. > I used https://verifalia.com/validate-email to validate the email > address and it is syntactically correct. Mailman core thinks it's OK too as does RFC5322. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

4 years, 9 months

[MM3-users] Re: List Digest - Subject line

by Mark Sapiro

On 5/12/21 1:44 PM, smorytko(a)gmail.com wrote: > Steve, > > Right you are! Yahoo! Mail apparently disassociates the header information from the text body so I can only see it in the Today's Topics summary, while GMail does not and offers it in both locations. One thing you can try is have your Yahoo users subscribe to the plain text rather than the MIME digest. Generally, at least with good MUAs, MIME is preferred because it preserves non-text parts and allows replying to an individual message as opposed to the digest, but clearly Yahoo is not one of those MUAs and Yahoo users will probably find plain text digests preferable. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

4 years, 1 month

[MM3-users] Re: Mailman3 subscribe over command line

by Mark Sapiro

On 9/17/21 1:46 AM, tibor.molnar(a)waltoninstitute.ie wrote: > If I try using this command the following error occurs: > >>>> from mailman.testing.documentation import cli >>>> command = cli('mailman.commands.cli_addmembers.addmembers') > Traceback (most recent call last): ... > ModuleNotFoundError: No module named 'mailman.commands.cli_addmembers' What Mailman version is this? The add_members mailman subcommand was added in 3.3.2 and didn't exist before that. In Mailman 3.3.1 and prior, you need to use the members subcommand with the -a/--add option. Also note that mailman.testing.documentation.cli is only intended to be used for tests and not production. See https://click.palletsprojects.com/en/8.0.x/testing/#testing-click-applicati… -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

3 years, 9 months

[MM3-users] Re: How to change rest APi password

by Mark Sapiro

On 10/25/21 11:05 AM, bob B wrote: > This is probably s stupid question but I have been searching for an answer. > > How do you set a different rest api password? > > The instructions say : > The credentials are set in the [webservice] section of the configuration using the admin_user and admin_pass properties. But what is that referring to? > > I am running docker, so is this in the docker.yaml file (I tried it there it did not work) or in the Django config file or someplace else? It's in mailman.cfg. Where that file is in the docker container, I don't know. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

3 years, 8 months

[MM3-users] Re: FYI: Django security releases issued: 4.0.6 and 3.2.14

by Mark Sapiro

On 7/7/22 12:56 AM, Stephen J. Turnbull wrote: > Thanks to Guillermo for the heads-up. > > As far as I can tell, neither of these functions is used in the > Mailman suite itself. That doesn't mean they aren't used in one of > our dependencies, but it does mean that we can't do much about what's > installed on your host. You should upgrade if you are using Django 3 > or 4. (Not sure we support Django 4.) We will keep a watch on this. I just upgraded from Django 3.2.11 to 3.2.14 on mail.python.org and lists.mailman3.org. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

3 years

[MM3-users] Lost messages - was: Re: Do you struggle with message rejected. AUP#CDRBL while using mailman with your ISP email relay?

by Mark Sapiro

On 4/18/25 9:37 AM, Michael Richardson wrote: > > My problem, on lists.sandelman.ca aka lists.tcpdump.org, is messages that > appear to have been processed by my MTA (according to postfix logs), but > which are never delivered, nor held. Lost somewhere in mailman3 queue. > Sometimes they show up after a host reboot. It seems that maybe not all the runners are running. What's in Mailman's various var/queue/* directories? What's in Mailman's var/logs/mailman.log? -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

2 months, 2 weeks

[MM3-users] lists.mailman3.org web site.

by Mark Sapiro

I have just upgraded the lists.mailman3.org Mailman 3 installation to the heads of the GitLab mailman* branches. A major change is the switch from Persona to Django Allauth. This requires some configuration which isn't yet complete. Hopefully it will all be working very soon. In the mean time if you want to log in to Hyperkitty/Postorius you should be able to log in with your email address. The first time you do this, Mailman probably won't even know your password so you'll have to request a reset. Once you have reset your password, you should be able to log in. I hope to have several social auth choices working very soon. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

8 years, 10 months

[MM3-users] Re: mailman admin (django) interface does not work anymore after deleting website example.com

by Mark Sapiro

On 3/10/19 8:18 AM, Torge Riedel wrote: > > I deleted the existing "example.com" and added a new one > "lists.mydomain.de". > > Now the admin (django) interface always gives "An error occurred while > processing your request". After one of the first navigation clicks I saw > a message that "site with id 1 is missing". In your Django settings your have SITE_ID = 1 which pointed to the example.com domain you deleted. You need to override this in settings_local.py. Probably SITE_ID = 2 but if that doesn't work, try '0' -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

6 years, 3 months

Search results for query "sapiro"