Search results for "sapiro" - lists.mailman3.org

[MM3-users] Re: What's the difference between (purpose of) reject and ignore

by Mark Sapiro

On 6/25/22 13:22, denis.bitouze(a)univ-littoral.fr wrote: > Mark Sapiro wrote: > >> They seem so to me, but in any case, if you look at Postorius -> >> Settings -> Message Acceptance -> Default action to take when a >> (non-)member posts to the list, they are described there in much more >> detail. > > OK: not easy to figure out. A tooltip on the corresponding buttons would > be helpful. Agreed. See https://gitlab.com/mailman/postorius/-/issues/551 >>> BTW, no clue about an automatic banishment of emails from discarded >>> messages? >> >> In the pop-up dialog from clicking the subject of a held post you can >> set the sender's moderation status when discarding the post. > > Sorry but I can only see: > > - “--- Set member moderation ---” (non selectable, I guess) > - “Hold for moderation” > - “Reject (with notification)” > - “Discard (no notification)” > - “Accept immediately (bypass other rules)” > - “Default processing” > > and cannot see how I can at the same time “Discard (no notification)” > and “Banish the email of the post's sender”. If you select “Discard (no notification)” from that dropdown and then click Discard, the current message will be discarded and future messages from that sender will be automatically discarded. Is that not what you want? -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

3 years, 10 months

[MM3-users] Re: Simplified installation instructions

by Mark Sapiro

On 4/7/19 4:26 PM, Frank Yappa wrote: > I've looked at installing Mailman3 many times but have never succeeded - > there simply too many instructions. > > Is there a simple guide to get just web front end to Mailman3 where you can > import an existing mailing list simply for viewing? Have you seen <https://hyperkitty.readthedocs.io/en/latest/install.html>? > Which is the easiest system to install Mailman3 on? I have a Debian system > and would be grateful for any pointers showing how to install it . There are Debian packages. See <https://packages.debian.org/search?keywords=mailman3> -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

7 years

[MM3-users] Re: Mailman rewrite the Cc header incorrectly

by Mark Sapiro

On 5/27/20 2:35 AM, Alan So wrote: > > I tried to read RFC5322 again but I am not sure whether I interpret it correctly. The display-name seem allowing folding in the middle. > > 3.2.4 > quoted-string = [CFWS] > DQUOTE *([FWS] qcontent) [FWS] DQUOTE > [CFWS] > > A quoted-string is treated as a unit. That is, quoted-string is > identical to atom, semantically. Since a quoted-string is allowed to > contain FWS, folding is permitted. ... You are correct. I missed that, so the messages created by Outlook are not defective. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

5 years, 11 months

[MM3-users] Re: Adding list via web form

by Mark Sapiro

On 11/2/22 15:25, fstltna--- via Mailman-users wrote: > Trying to add a list using the web form but I get this: "Error: You are not authorized to create new mailing lists". Do I need to log in somewhere? I thought I was logged in as admin but maybe not? You need to be logged in as a Django superuser. See the Django admin command createsuperuser. Although if you are not logged in as a superuser, the Create New List button should not appear on the index page. Did you go to https://example.com/mailman3/lists/new/ directly? -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

3 years, 6 months

[MM3-users] Re: Apache+mod_wsgi issue

by Mark Sapiro

On 12/22/22 03:49, Odhiambo Washington wrote: > > My challenge now is to get Apache+mod_uwsgi to serve my pages, I assume that's a typo. I.e, mod_wsgi, not mod_uwsgi. > but I am > hitting the error below which has gotten me stuck. > Thanking you in advance for your advice on how to overcome this. > ...> [Thu Dec 22 14:21:23.041064 2022] [wsgi:error] [pid 4288] [remote > 197.232.81.246:15107] ModuleNotFoundError: No module named 'settings' Django can't import your settings.py. Is the directory that contains it in your Python path and does that directory contain (an empty) __init__.py? -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

3 years, 4 months

[MM3-users] Re: Mailing list name with capital letters?

by Mark Sapiro

On 9/26/23 12:00, Mark London wrote: > I guess this is not possible? If you mean create a list with upper case in it's list_id or list posting address, you are correct, but since in your OP you said "Right now, only the first letter can be capitalized." you must be talking about the list's display name. That can be set in Postorius at Settings -> List Identity per my reply at <https://lists.mailman3.org/archives/list/mailman-users@mailman3.org/message…>. It can also be set via REST or mailman shell. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

2 years, 7 months

[MM3-users] Re: install v3.3.11

by Mark Sapiro

On 2/14/25 08:50, Jose Bernal via Mailman-users wrote: > I'd like to install Mailman v3.3.11. Are there instructions for installing > from pip? If not, is there an alternate way to install this latest > version? When executing: > > pip install mailman==3.3.11 > > I get: ERROR: No matching distribution found for mailman==3.3.11 3.3.11 is still in development and hasn't yet been released to PyPI so if you want to install it in its current state, you have to install from GitLab. pip install git+https://gitlab.com/mailman/mailman@master will install the head of the master branch in GitLab. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

1 year, 2 months

[MM3-users] Re: Disable automatic bouncing globally?

by Mark Sapiro

On 10/27/25 19:13, jkoral(a)luc.edu wrote: > Is there a way to disabled the automatic bouncing globally on all lists or do I have to do that on each individual list? There is no global setting, but you could use mailman shell to turn it off for all lists. E.g.: ``` $ mailman shell Welcome to the GNU Mailman shell Use commit() to commit changes. Use abort() to discard changes since the last commit. Exit with ctrl+D does an implicit commit() but exit() does not. >>> for mlist in getUtility(IListManager): ... mlist.process_bounces = False ... >>> commit() ``` -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

6 months, 1 week

[MM3-users] Re: Cannot issue commands through email

by Mark Sapiro

On 11/8/25 12:39, Ken G. wrote: > > <double_empathy-join(a)thedagora.social>: host > mail.thedagora.social[172.238.182.104] said: 550 5.1.1 > <double_empathy-join(a)thedagora.social>: Recipient address rejected: > User > unknown in virtual mailbox table (in reply to RCPT TO command) ... > virtual_mailbox_domains = > mysql:/etc/postfix/mysql-virtual-mailbox-domains.cf > virtual_mailbox_maps = mysql:/etc/postfix/mysql-virtual-mailbox-maps.cf > virtual_transport = lmtp:unix:private/dovecot-lmtp This is the problem. Your domain is a virtual_mailbox_domain. You need to configure an alias_domain for your list domain and configure Postfix per https://docs.mailman3.org/projects/mailman/en/latest/src/mailman/docs/mta.h… -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

5 months, 4 weeks

[MM3-users] Re: MM3 templates

by Mark Sapiro

On 2/16/23 11:14, Odhiambo Washington wrote: > On Thu, Feb 16, 2023 at 9:32 PM Mark Sapiro <mark(a)msapiro.net> wrote: >> >> I don't know why? What's the content of the template table in the database? >> ``` >> SELECT * FROM template; >> ``` >> > > root@localhost [mailmansuite]> SELECT * FROM template; > Empty set (0.03 sec) Well, that eliminates one possibility. I still don't know why. Mailman should be using all the list: templates from /opt/mailman/mm/var/templates/lists/kictanet.lists.kictanet.or.ke/en/ for messages from the kictanet(a)lists.kictanet.or.ke where the target language is English. Is the list's preferred language English and is the recipient's preferred language English? >> That's just wasting space. If you're putting the exact same templates in >> site/, domains/ and lists/, you might just as well delete the ones in >> domains/ and lists/ and Mailman will use the ones from site/. >> > > Well, space is cheap these days. More importantly, it could lead you to edit a template that isn't used because one of the other places is searched first. I would like to figure out what the issue is, but I don't know how to proceed. Have you checked /opt/mailman/mm/var/logs/mailman.log for anything relevant? If all else fails and we can't figure this out, you could always set the template(s) in Postorius. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

3 years, 2 months

Search results for query "sapiro"