Search results for "sapiro" - lists.mailman3.org

[MM3-users] Re: statistics monitoring for Mailman3

by Mark Sapiro

On 3/15/21 2:38 PM, Mark Sapiro wrote: > On 3/15/21 2:01 PM, Mark Sapiro wrote: >> >> This has nothing to do with outlook.com per se. It only has to do with >> the length of the log message. Further, I do not think there are >> actually newlines in these log messages. I think that is just an >> artifact of how you are viewing the log. > > > Actually, I'm wrong again. It does have to do with outlook.com. It is > because the Message-ID: header in the original message is folded as in > > Message-ID: <crlf> > <MN2PR20MB324587763E970CC56351F8C5B66D9(a)MN2PR20MB3245.namprd20.prod.outlook.com> Sorry for the premature send. I'm having a bad time with this thread. :-( I meant to say It does have to do with outlook.com. It is because the Message-ID: header in the original message is folded as in > Message-ID: <crlf> > <MN2PR20MB324587763E970CC56351F8C5B66D9(a)MN2PR20MB3245.namprd20.prod.outlook.com> and the added <crlf><space> actually gets included in the log message. Anyway I have updated the script at <https://www.msapiro.net/scripts/smtp_report>. My update is much simpler than the one at <https://lists.mailman3.org/archives/list/mailman-users@mailman3.org/message…>, but I have tested it, and it works. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

5 years, 5 months

[MM3-users] Re: Hyperkitty: usage of h2-tags

by Mark Sapiro

On 11/2/20 2:47 PM, Mark Sapiro wrote: > > HyperKitty on lists.mailman3.org and mail.python.org has an unreleased > markdown rendering engine. Messages in the archive are rendered in > markdown. In particular, a line beginning with `##` is rendered as an > `<h2>`. See, e.g., <https://www.markdownguide.org/cheat-sheet/> > Actually, in your case, it's not `##`. Lines `underlined` with `====` become `<h1>` and lines underlined with `----` become `<h2>`. See <https://www.markdownguide.org/basic-syntax/> Leave a blank line between your text and the `-- ` signature separator and the last line of text won't be rendered as `<h2>` -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

5 years, 9 months

[MM3-users] Re: Hyperkitty download mbox

by Mark Sapiro

On 5/1/21 4:58 AM, Andrew Hodgson wrote: > Mark Sapiro wrote: > >> ``` >> msg["Message-ID"] = "<%s>" % re.sub('[ <>\r\n]', '', self.message_id) >> ``` > > Thanks that did the trick. Will this need to go in the upstream release or is there any way I could re-import those messages into the database with a newer version of the import command from the original mbox from 2.1 to fix this? Sorry for not following up sooner. This got deferred and then forgotten :( I would like to see the offending message from the original mbox so I can develop an appropriate fix. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

5 years, 3 months

[MM3-users] Re: Newbie question 2: Rewriting issue for bounced emails

by Mark Sapiro

On 12/26/21 6:19 PM, Mark Sapiro wrote: > > Otherwise, you can do this in mailman shell, e.g. > ``` > $ mailman shell > > Welcome to the GNU Mailman shell > Use commit() to commit changes. > Use abort() to discard changes since the last commit. > Exit with ctrl+D does an implicit commit() but exit() does not. > > >>> dm = getUtility(IDomainManager) > >>> d = dm.get('example.com') > >>> d.alias_domain = x.example.com > >>> commit() > ``` Ooops. That should be d.alias_domain = 'x.example.com' I.e., quoted -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

4 years, 7 months

[MM3-users] Re: Deleting A List

by Mark Sapiro

Mark Sapiro wrote: > update hyperkitty_email set mailinglist_id = 2 where mailinglist_id = 13; > update hyperkitty_mailinglist_owners set mailinglist_id = 2 where > mailinglist_id = 13; > update hyperkitty_mailinglist_moderators set mailinglist_id = 2 where > mailinglist_id = 13; > update hyperkitty_thread set mailinglist_id = 2 where mailinglist_id = 13; > delete from hyperkitty_mailinglist where id = 13; > update hyperkitty_mailinglist set name = 'list(a)lists.nog.ke', list_id = > 'list.lists.nog.ke' where id = 2; Or instead of that you could just go to the new list(a)lists.nog.ke archive in HyperKitty and delete it and then just do the ``` update hyperkitty_mailinglist set name = 'list(a)lists.nog.ke', list_id = 'list.lists.nog.ke' where id = 2; ``` -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

2 years, 3 months

[MM3-users] Re: Confirmation emails aren't sent to users.

by Mark Sapiro

On 2/13/26 12:25, Ibiam Chihurumnaya via Mailman-users wrote: > Mark Sapiro wrote: >>> You normally don't need to set any of those. The defaults should be fine >> for a local MTA listening on port 25, however what's in /etc/hosts for >> localhost. If it's the IPv6 address ::1, I suggest changing it to 127.0.0.1. > > Yes, I did change it after you'd said so in the other thread. In that case I can't explain why something about the confirmation mail doesn't show up in the MTA's log. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

6 months

[MM3-users] Re: Implicit destination

by Mark Sapiro

On 08/27/2018 11:03 AM, David Krantz wrote: > On Mon, Aug 27, 2018 at 2:50 AM Mark Sapiro <mark(a)msapiro.net> wrote: >> >> To avoid this backscatter, you can set the list's >> respond_to_post_requests attribute to False. There are two problems >> here. One is this setting is not currently exposed in Postorius, and the >> other is this will also stop desired held message notices such as those >> from list members. > > Aha. That was a simple solution although with a bad consequence. Will > it stop moderation mails to the moderator as well? No. The notices to the moderator will still be sent. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

7 years, 11 months

[MM3-users] Re: disabled users

by Mark Sapiro

On 10/25/23 11:09 PM, Stephen J. Turnbull wrote: > Mark Sapiro writes: > > > I don't think this is correct. Members with delivery disabled by > > bounce will normally show 0 rather than None for bounce score. > > Too bad; eg, on this list more than half the members have 0 bounces, > while (estimating from memory) about 1 in 10 have None, and about half > of the Nones are disabled. These may be older. Currently, if probes are enabled, the score is set to 0 when the probe is sent. Otherwise the score is set to 0 when delivery is disabled. The score is never set to None. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

2 years, 9 months

[MM3-users] Re: Message Personalization: embed User name in header/footer

by Mark Sapiro

On 05/06/2018 11:30 PM, Johannes Winter wrote: > Am Sun, 6 May 2018 07:26:45 -0700 > schrieb Mark Sapiro <mark(a)msapiro.net>: >> >> We're working on getting template editing in Postorius for release >> later this month. >> > > Cool! I hope you also fix this issue > https://gitlab.com/mailman/mailman/issues/409 while doing do? The two things are related only in that they both involve templates which is not to say that we won't come up with something for https://gitlab.com/mailman/mailman/issues/409 but only that they aren't a "package". -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

8 years, 3 months

[MM3-users] Re: search this list searches more then just this list

by Mark Sapiro

On 1/26/24 13:55, Mark Sapiro wrote: > > Yes, presumably because no one sets `XAPIAN_LONG_TERM_METHOD=hash` in > the environment. Do you have a reason for this? Actually, it's not an enviroment setting. It's a django setting XAPIAN_LONG_TERM_METHOD = 'hash' but in any case, I don't know why anyone would want that. What it does is rather than truncate a long term in the index, it replaces that term with a sha224 hash of the term, but that raises the question of how/why one would be searching for the hash rather than the term. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

2 years, 6 months

Search results for query "sapiro"