Search results for "sapiro" - lists.mailman3.org

[MM3-users] Re: Cannot Install Web UI

by Mark Sapiro

On 11/1/25 12:14, dap1--- via Mailman-users wrote: > > As an aside, mailmanweb will not start with gunicorn named gunicorn.conf. It only works if it is named gunicorn.py. I don't know if that is an Ubuntu thing but it probably needs to be documented. For me it issues a warning but starts up just fine. I don't know what's wrong with your installation, but it seems to have serious issues compared to one which I created by following the doc at https://docs.mailman3.org/en/latest/install/virtualenv.html -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

4 months

[MM3-users] Re: Email commands

by Mark Sapiro

On 09/22/2016 02:34 AM, Jean-Luc Wasmer wrote: > Hi, > > I wasn't able to find documentation about the currently support email > commands for Mailman 3. Documentation can be found by sending a 'help' command to the -request address. More detail on a specific command can be obtained via, e.g., 'help subscribe'. > The following command doesn't work for me (mailman bundler 3.0.0): > subscribe address=$<$ADDRESS$>$ Currently, the only option is [digest=<no|mime|plain>] > Will this be supported later on? Submit a request at <https://gitlab.com/mailman/mailman/issues>. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

9 years, 5 months

[MM3-users] Re: Installing mailman 3

by Mark Sapiro

On 07/25/2017 12:18 PM, Rafael Mora wrote: > I put this config in mailman.cfg: > > To configure Core to use Postfix, add the following configuration to your > mailman.cfg configuration, be sure to replace mail.example.com with your > email domain: > > [mta] > incoming: mailman.mta.postfix.LMTP > outgoing: mailman.mta.deliver.deliver > lmtp_host: mail.example.com > lmtp_port: 8024 > smtp_host: mail.example.com > smtp_port: 25 > > > is this correct?? Probably it should be lmtp_host: 127.0.0.1 and smtp_host: localhost but see mailman/config/schema.cfg for the defaults and more docs. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

8 years, 7 months

[MM3-users] Re: Can't subscribe on new site/domain

by Mark Sapiro

On 10/10/25 1:37 AM, Flo via Mailman-users wrote: > > The difference I am talking about is that lists.example1.com/postorius/ > lists shows only its mailing lists while lists.example2.com/postorius/ > lists shows all mailing lists on the server (ie. also mailing lists of > example1.com) What is your Postorius version? Whether Postorius displays all lists or only those matching the current host is controlled by the FILTER_VHOST setting. There was an issue with this prior to Postorius 1.3.3. See https://gitlab.com/mailman/postorius/-/issues/394 -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

4 months, 2 weeks

[MM3-users] Re: Unknown attribute: max_message_size

by Mark Sapiro

On 06/21/2018 03:29 AM, Alexander Klotz wrote: > Hi, > > unfortunately we still have problems configuring a list so that it > allows a message size larger than 40 KB. Neither the workaround > described here: > https://gitlab.com/mailman/postorius/commit/f86ab7fb5cc6edeb23c43336b677c24… > (required was already set to false) nor this docker setup by yova > https://gitlab.com/mailman/postorius/issues/246 worked. Are there any > other options we could try? Use 'mailman shell'. I.e. 'mailman shell -l listname@domain' and set m.max_message_size = N where N is the number of KB you want. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

7 years, 8 months

[MM3-users] Re: New releases

by Mark Sapiro

On 6/8/20 1:01 PM, Danil Smirnov wrote: > > I have Postorius verson 1.3.3 but I still see horizontal tabs not vertical > menus. > > Could you elaborate more on this? The first row of horizontal tabs is unchanged, but the `Settings` tab used to have a second horizontal row and now has a vertical list on the left. After you upgraded did you run these django-admin commands? ``` django-admin collectstatic --clear --noinput --verbosity 0 django-admin compress django-admin compilemessages django-admin migrate ``` These 4 commands should be run after every update to Postorius, HyperKitty or django_mainlman3. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

5 years, 8 months

[MM3-users] Re: Issues with cross posted emails after upgrading to mailman 3.3.6

by Mark Sapiro

On 11/5/21 2:07 AM, Stephen J. Turnbull wrote: > > Are we guaranteed to get a separate LMTP delivery for each list? That > is, if the MTA receives 2 RCPT TOs to lists for one transaction, won't > it do the same in LMTP when it sends forwards the message to Mailman? It doesn't matter. The LMTP runner makes a separate `in` queue entry for each recipient list, thus these are processed as separate messages regardless of how they arrived. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

4 years, 3 months

[MM3-users] Re: new list not working

by Mark Sapiro

On 3/9/23 14:32, Christian via Mailman-users wrote: > When I ran > > mailman members -r -n enabled redlatinleg(a)lists.ccalternatives.org > > I did receive a list of subscribers for the new list I created, not just the > owner or moderator. > > Upon closer examination, another of my longtime working lists is also not > working. Similar behavior as the new list I created in that I see the > message has been archived, but not distributed to the subscribers. What do your MTA logs show? -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

2 years, 11 months

[MM3-users] Re: NGINX reports 502 after fresh install

by Mark Sapiro

On 3/28/23 13:19, Mailman wrote: > Hi All, > > I'm working my way through the recommended installation in a Python virtual environment. > > I seem to have the components installed and working but when I try to access the web interface I receive an error 502 from the web server. > > I'm assuming I've misconfigured something in Nginx. Have you configured nginx per <https://docs.mailman3.org/en/latest/install/virtualenv.html#nginx-configura…>? Is your wsgi server (uWSGI or Gunicorn) running and listening on port 8000? -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

2 years, 11 months

[MM3-users] Re: Archive date/time vs elapsed time

by Mark Sapiro

On 6/26/23 11:41 PM, Mark wrote: > > No, I don't see it on the MM users' archive. > The archive where I'm seeing it is HyperKitty version 1.3.4 on a Debian > packaged MM 3.3.3 > The problem lay therein? I don't know if this is a change since 1.3.4 or an issue with the Debian package. The latest Debian stable (bookworm) has more up to date packages if you can upgrade. In any case, this does not seem to be an issue in current HyperKitty. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

2 years, 8 months

Search results for query "sapiro"