Search results for "sapiro" - lists.mailman3.org

[MM3-users] Re: Race condition when mass subscribing same email addresses to two lists?

by Mark Sapiro

On 11/11/21 5:50 PM, Alan So wrote: > Thanks a lot. Just curious whether it is a new issue of 3.3.5 or just an old issue that rarely happen practically. We have been using 3.2 for some time and we are evaluating whether we should go for an upgrade now to resolve some other issues. It is not a new issue. It has always been there. It's easy enough to avoid, just don't run parallel mass subscribes. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

4 years, 1 month

[MM3-users] Re: using SSH/TLS with external MTA

by Mark Sapiro

On 7/29/24 04:03, Odhiambo Washington via Mailman-users wrote: > > I am following this thread out of curiosity. > So I added the same lines to my /opt/mailman3/settings.py - on a virtualenv > install of the latest MM3 code.It's my test VM. > After adding the lines and restarting mailmanweb, I then entered the > virtualenv and did 'mailman-web createsuperuser' which completed > successfully, but NO MAIL! And why do you think `mailman-web createsuperuser` results in mail being sent? (It doesn't) -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

1 year, 4 months

[MM3-users] Re: list's RSS feed has wrong URLs (base path instead of subdomain)

by Mark Sapiro

On 5/27/25 10:48, Simone via Mailman-users wrote: > > I have set this up and it's working well so far, but today I noticed that links in list's RSS feed point to https://mydomain.tld, while mailman is running on https://lists.mydomain.tld. > > I wouldn't know how to fix this.. any hints? I'm not seeing this in, e.g., output from https://lists.mailman3.org/archives/list/mailman-users@mailman3.org/feed/ -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

6 months, 2 weeks

[MM3-users] Re: hyperkitty failed to create a thread

by Mark Sapiro

On 2/11/19 9:47 AM, Danil Smirnov wrote: > > What could be a reason of HyperKitty failing to create a thread from > chained emails? > > For example, see "RECENTLY ACTIVE DISCUSSIONS" on page > https://wlug.mailman3.com/hyperkitty/list/wlug@lists.wlug.org/ > > "Openvpn and Network mapping" discussion displayed as five threads instead > of only one... > > Any ideas how to improve HyperKitty ability to detect threaded messages? Thanks for the report. The MR at <https://gitlab.com/mailman/hyperkitty/merge_requests/125> will fix this. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

6 years, 10 months

[MM3-users] Re: Core, Hyperkitty and Postorius releases

by Mark Sapiro

On 5/14/21 5:02 AM, Odhiambo Washington wrote: > On Fri, May 14, 2021 at 2:52 PM Jeff Steele <jeff(a)steele.com> wrote: > >> >> >> On May 14, 2021, at 7:49 AM, Odhiambo Washington <odhiambo(a)gmail.com> >> wrote: >> >> /bin/sh: sass: Permission denied* >> >> >> >> Did you check the permissions on your sass binary? >> > > My mailman installed in /opt/mailman/mm > > find /opt/mailman/ -type f -name sass > > yielded nothing! Try `which sass` -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

4 years, 6 months

[MM3-users] Re: MM3 generates long lines?

by Mark Sapiro

On 6/23/21 7:45 AM, Andreas Barth wrote: > > Thanks Mark, that's what I did. After the restart I needed to activate > it on a per-list basis. > > However, I'd prefer to be able to do that on global basis. Not a big > issue, but still thought it worth asking. You can do it with a `mailman shell` script. Something like ``` >>> for mlist in getUtility(IListManager).mailing_lists: ... for archiver in IListArchiverSet(mlist).archivers: ... if archiver.name == 'prototype': ... archiver.is_enabled = True ... >>> commit() ``` -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

4 years, 5 months

[MM3-users] Re: Setup Question: Disk-Layout (Migrating from Mailman 2.1)

by Mark Sapiro

On 4/17/25 3:18 AM, christian.schneider(a)tu-dortmund.de wrote: > > But I could find no information about the location where hyperkitty stores the archives on an Ubuntu-/Linux-system. > I assume the archives are stored underneath "/var/..." this is only a guess. > But is this guess right? As answered in other replies, HyperKitty stores its archives in tables in the configured database. However, if the prototype archiver is enabled, those archives are stored in maildir format in Mailman's var/archives/prototype/ directory. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

7 months, 3 weeks

[MM3-users] Re: Cannot Install Web UI

by Mark Sapiro

On 10/28/25 14:28, Odhiambo Washington via Mailman-users wrote: > > True. But putting a file inside sites-enabled/ or conf-enabled/ still > achieves the same result. > Apache's a2ensite/a2enmod will create the symlinks in the *-enabled/ > subdirs, but putting files in there, with the right extensions still does > it. Yes it works, but it also breaks a2(en|dis)(site|mod|conf) functionality for that site/mod/conf. Configurations should always be in a *-available/ directory with symlinks in the corresponding *-enabled/ directory so that the tools work as advertised. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

1 month, 2 weeks

[MM3-users] Re: Fwd: [Django] ERROR (EXTERNAL IP): Internal Server Error: /archives/search

by Mark Sapiro

On 1/27/23 05:53, Odhiambo Washington wrote: > On Mon, Jan 23, 2023 at 11:48 PM Mark Sapiro <mark(a)msapiro.net> wrote: >> >> Note that when following >> https://docs.mailman3.org/en/latest/install/virtualenv.html you create >> /etc/mailman3/settings.py and it contains >> ``` >> from mailman_web.settings.base import * >> from mailman_web.settings.mailman import * >> ``` >> to establish a base set of settings that can be augmented or overridden >> in /etc/mailman3/settings.py. mailman_web.settings.mailman in turn contains >> ``` >> HAYSTACK_CONNECTIONS = { >> 'default': { >> 'ENGINE': 'haystack.backends.whoosh_backend.WhooshEngine', >> 'PATH': "fulltext_index", >> ``` >> which is a relative path for fulltext_index and may need to be set to an >> absolute path. >> > > Mi Mark, > > I have read this page - > https://docs.mailman3.org/en/latest/install/virtualenv.html and further - > https://docs.mailman3.org/en/latest/install/virtualenv.html#initial-config > - without clicking any external links. > I still don't see the HAYSTACK_CONNECTIONS in the settings.py included on > that page. > I am missing something obvious, no? Please reread what I wrote above. HAYSTACK_CONNECTIONS is not in the suggested settings.py but it is in mailman_web.settings.mailman and is imported by the suggested settings.py. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

2 years, 10 months

[MM3-users] Re: Templates

by Mark Sapiro

On 09/23/2017 07:36 AM, David Krantz wrote: > Still two problems: > > 1. I do not know how to force a cache invalidation on a template. So > only way to change is to set a new name on the file and change the uri > there. Unpractical. No, restarts do not work. Have you tried restarting/reloading whatever dbm (MySQL, PostgreSQL, ?) you are using? > 2. the $user_delivered_to and $user_email do not expand for some > reason. Known problem? These require that the list delivery be personalized. See <http://mailman.readthedocs.io/en/latest/src/mailman/runners/docs/outgoing.h…>. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

8 years, 2 months

Search results for query "sapiro"