Search results for "user unknown in local recipient table" - Mailman-users

Re: configuring postfix local recipient table

by Odhiambo Washington

On Wed, Apr 23, 2025 at 5:56 PM Alexander Inzinger-Zrock via Mailman-users < mailman-users(a)mailman3.org> wrote: > **System Key Data** > OS: Debian 12 > mailman: GNU Mailman 3.3.10 (Tom Sawyer) > Python: Python 3.11.2 (main, Nov 30 2024, 21:22:50) [GCC 12.2.0] > Method: Python Virtual Environment Installation > > > Ahoi, > > i am trying to configure a mailman3 instance > to replace a mailman2 installation (both on different hosts). > The mm3 instance is actually not reachable (Incoming) but can send > (Outgoing), > as is the desired state to be (we intend to swap IPs during change of > systems). > > A. Verify Incoming > > To verify that emails send to the MTA (postfix) get properly handled > and handed over to the mm3-instance i tried to substitute incoming email by > > a) swaks utility [1] (fail) > b) telnet utility [2] (fail) > c) command ''mailman inject'' [3] (success) > > With c) i copied a former generate testmail-file to the mm3-host > and injected it directly to my testlist (leaving out the MTA). > > With a) and b) i tried to hand over a testmail via CLI to the MTA (postfix) > what resulted in the error: > > "Recipient address rejected: User unknown in local recipient table" > > > B. /etc/postfix/main.cfg > > A search in mailman-users(a)mailman3.org archives [4] pointed me to the > configuration of postfix as MTA [5], especially settings with the > 'local_recipients_maps' parameter that should be set like [5]: > > local_recipient_maps = proxy:unix:passwd.byname $alias_maps > hash:/path-to-mailman/var/data/postfix_lmtp > > what i did / already had done. > > > C. aliasing, restarting services and test without , > > I then restarted postfix, rebuilt the postfix aliases (command > ''newaliases'') > and rebuilt the mailman aliases (command ''mailman aliases''), > even tried with space-separation instead of coma-separation [6], > testet again with same result. > > > D. empty /opt/mailman/mm/var/data/postfix_lmtp > > and then i just found out that my postfix_lmpt file was empty > (that i believe to be the the place from where the hastables take their > input). > > > Questions: > > 1. could somebody suggest a way, an entry should occur in postfix_lmtp? > 2. What would be the appropriate order to manually generate aliases? > first: postfix-command ''newaliases'' and > second: mailman-command ''mailman aliases'' > or reverse? > 3. finding traces [7] of a file called postfix.cfg > i can't find it (anymore) in the official installation instructions. > Is that file (still?) necessary regarding: > 3.1 parameter for default lookup table type > 3.2 pointing to command ''postmap'' > 4. to what user should the command ''postmap'' be available [8]? > > > Any pointer to manuals or examples i may have missed or ideas > on any of those 4 questions would be greatly appreciated. > There is just one definitive manual: https://docs.mailman3.org/en/latest/install/virtualenv.html If this is NOT what you followed, then my suggestion is you start over afresh and follow the steps without skipping anything. You can test Mailman3+Postfix with a phony domain name. As long as the domain name is local, deliveries to the list should happen. Try and apply the KISS principle. For instance, you could submit a post to Mailman by: echo "This is a test post" | mail -s " Testing ML Delivery" listname@phony-domain-name If submitted from an address you have subscribed to the list, you should see it in the archives of that list. Otherwise, you can see it in Postorius under held messages. The transaction details will be in mailman.log as well as your Postfix logfile. -- Best regards, Odhiambo WASHINGTON, Nairobi,KE +254 7 3200 0004/+254 7 2274 3223 In an Internet failure case, the #1 suspect is a constant: DNS. "Oh, the cruft.", egrep -v '^$|^.*#' ¯\_(ツ)_/¯ :-) [How to ask smart questions: http://www.catb.org/~esr/faqs/smart-questions.html]

6 months

MM3 Postfix FROM header issue

by Stephen J. Turnbull

eboltz(a)lhtservices.com writes: > When I check the /var/log/mail.log without the > sender_canonical_maps setting enabled, The meaning of "canonical" here is that this is the original and universally acceptable accept-no-substitutes-or-aliases version of the sender's address. If you don't want to see it *literally everywhere* in the header of a message coming out of Postfix, you shouldn't put it in a canonical_map. > then the initial email sender is either rejected because 'Recipient > address rejected: User unknown in virtual alias table' Postfix is configured to relay only local senders to anywhere, or remote senders to local recipients and to relay_domains. This means that the list address doesn't look like a local address (I think it's a bad idea to set myhostname=localhost!) and it isn't in relay_domains (not sure why that might be if the postfix_domains file is present as a compiled .db), so the last try is virtual address (Postfix's way of delivering a possibly remote recipient address to a local recipient). You should use postconf to check that all of the my* variables are set sanely. > or '550-From header sender domain not verified (example.com) > 550-On your sending Verified senders page > 550 verify the sender domain or email to be allowed to send' Not sure where the "example.com" is coming from. If that is being set by the remote smtpd (smtp2go?), and isn't a hard-coded string, something's wrong either with your Postfix configuration or your test email -- that should be the envelope sender domain, which should be your host. The example.com domain actually exists, and I'm sure it doesn't allow you to send email! As others mention, you probably need to have a valid SPF record in your DNS for your host as well. > Here is my main.cf setup Check that both the .txt (produced by Mailman) and .db (produced by /usr/sbin/postmap) files exist for the postfix_lmtp and postfix_domains maps. The function that produces the .txt source is supposed to call postmap to generate the compiled .db database, you shouldn't need to do it by hand. But that's the only Mailman-specific reason for the "not in virtual address table" message. Postfix itself only looks at the .db file, it will not compile or even read the .txt. > transport_maps = hash:/var/lib/mailman3/data/postfix_lmtp > local_recipient_maps = hash:/var/lib/mailman3/data/postfix_lmtp > relay_domains = hash:/var/lib/mailman3/data/postfix_domains Make sure there are no Mailman mailing lists in the aliases file. > alias_maps = hash:/etc/aliases > alias_database = hash:/etc/aliases As mentioned, this is not a good idea: > myhostname = localhost Steve

1 year, 10 months

Re: mail for lists.ccalternatives.org loops back to myself, then Recipient address rejected

by Stephen J. Turnbull

Christian Stalberg via Mailman-users writes: > Main.cf had > > transport_maps = > hash:/opt/mailman/mm/var/data/postfix_lmtp > local_recipient_maps = > hash:/opt/mailman/mm/var/data/postfix_lmtp > relay_domains = > hash:/opt/mailman/mm/var/data/postfix_domains This configuration produced the error message: /etc/postfix/main.cf and restarted Postfix -Now a new error message: <Deepadaptation(a)lists.ccalternatives.org>: host lists.ccalternatives.org[192.46.218.224] said: 550 5.1.1 <Deepadaptation(a)lists.ccalternatives.org>: Recipient address rejected: User unknown in local recipient table (in reply to RCPT TO command) Is that correct? > I then changed local_recipient_maps to > > transport_maps = > hash:/opt/mailman/mm/var/data/postfix_lmtp > local_recipient_maps = proxy:unix:passwd.byname $alias_maps > hash:/opt/mailman/mm/var/data/postfix_lmtp > relay_domains = > hash:/opt/mailman/mm/var/data/postfix_domains And this produces the same error, is that correct? I don't think this can affect the Mailman lists, because there should be no configuration related to them in proxy:unix:passwd.byname or $alias_maps. If you don't need them for non-Mailman processing, don't add them. > I then restarted postfix & mailman. When sending a message to the list I am > still getting the same error I had before The problem seems to be that the "Deepadaptation" list addresses are not in the postfix_lmtp file. Try 1. run the "mailman aliases" command, then 2. run the "postmap" command. These are usually run automatically, but it is the first thing to try if you have having this kind of trouble. The second thing, maybe you have to get the spelling (including upper/lower case) exactly right on the list name. Is the Deepadaptation list's mailbox spelled exactly "Deepadaptation" with exactly those upper- and lowercase letters in your Mailman list configuration? (Case differences are very unlikely to be the problem, however.)

3 years, 4 months

Confirmation email bounces because of listname+something@example.com

by thor.rustad＠gmail.com

I'm sure this is a small configuration error, but I have followed the instructions for mailman3 and postfix. Basically mailman works fine, but confirmation emails, when answered by the subscriber or would-be subscriber, fails because 'listname' (after the '+something' is stripped off) is not a local user. Also see my post to the postfix group: http://postfix.1071664.n5.nabble.com/address-extension-fails-for-mailman-td…. Mind you, the postfix local_recipient_maps=regexp:/path/postfix_lmtp will correctly match any of the lists, but once the <+something> is added to the listname, it fails. Note that I have configured a subdomain, klubb.domain.com, for my mailing lists. First, my postfix.cf: recipient_delimiter = + smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no append_dot_mydomain = no readme_directory = no smtpd_tls_cert_file=/etc/letsencrypt/live/mailer.example.com/cert.pem smtpd_tls_key_file=/etc/letsencrypt/live/mailer.example.com/privkey.pem smtpd_use_tls=yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtpd_helo_restrictions = permit_mynetworks, permit_sasl_authenticated smtpd_sender_restrictions = permit_mynetworks, reject_non_fqdn_sender, reject_unknown_sender_domain smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, smtpd_tls_security_level = may smtp_tls_security_level = may smtp_tls_loglevel = 2 smtpd_tls_loglevel = 2 smtpd_relay_restrictions = permit_mynetworks, permit_sasl_authenticated, defer_unauth_destination mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 172.19.199.0/24 <public.ip>/32 myhostname = mailer.example.com mydomain = example.com alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = mailer.example.com mydestination = klubb.$mydomain, localhost.$mydomain, localhost, $myhostname, $mydomain relayhost = mailbox_size_limit = 0 inet_interfaces = all inet_protocols = all compatibility_level = 2 transport_maps = regexp:/opt/mailman/core/var/data/postfix_lmtp local_recipient_maps = regexp:/opt/mailman/core/var/data/postfix_lmtp relay_domains = regexp:/opt/mailman/core/var/data/postfix_domains unknown_local_recipient_reject_code = 550 owner_request_special = no propagate_unmatched_extensions = canonical, virtual, alias, forward, include Here is the line in postfix mail.log where the valid listname+token is rejected: NOQUEUE: reject: RCPT from mail-lf0-f43.google.com[209.85.215.43]: 550 5.1.1 <abcliste-confirm+79ecdc9fe57e086b8e1335299ef5255d156b72db(a)klubb.example.com>: Recipient address rejected: User unknown in local recipient table; from=<me(a)mydomain.com> to=<abcliste-confirm+79ecdc9fe57e086b8e1335299ef5255d156b72db(a)klubb.example.com> proto=ESMTP helo=<mail-lf0-f43.google.com> Any help will be appreciated.

8 years

Confirmation email bounces because of listname+something@example.com

by Thor Atle Rustad

I'm sure this is a small configuration error, but I have followed the instructions for mailman3 and postfix. Basically mailman works fine, but confirmation emails, when answered by the subscriber or would-be subscriber, fails because 'listname' (after the '+something' is stripped off) is not a local user. Also see my post to the postfix group: http://postfix.1071664.n5.nabble.com/address-extension-fails-for-mailman-td… . Mind you, the postfix local_recipient_maps=regexp:/path/postfix_lmtp will correctly match any of the lists, but once the <+something> is added to the listname, it fails. Note that I have configured a subdomain, klubb.domain.com, for my mailing lists. First, my postfix.cf: recipient_delimiter = + smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no append_dot_mydomain = no readme_directory = no smtpd_tls_cert_file=/etc/letsencrypt/live/mailer.example.com/cert.pem smtpd_tls_key_file=/etc/letsencrypt/live/mailer.example.com/privkey.pem smtpd_use_tls=yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtpd_helo_restrictions = permit_mynetworks, permit_sasl_authenticated smtpd_sender_restrictions = permit_mynetworks, reject_non_fqdn_sender, reject_unknown_sender_domain smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, smtpd_tls_security_level = may smtp_tls_security_level = may smtp_tls_loglevel = 2 smtpd_tls_loglevel = 2 smtpd_relay_restrictions = permit_mynetworks, permit_sasl_authenticated, defer_unauth_destination mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 172.19.199.0/24 <public.ip>/32 myhostname = mailer.example.com mydomain = example.com alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = mailer.example.com mydestination = klubb.$mydomain, localhost.$mydomain, localhost, $myhostname, $mydomain relayhost = mailbox_size_limit = 0 inet_interfaces = all inet_protocols = all compatibility_level = 2 transport_maps = regexp:/opt/mailman/core/var/data/postfix_lmtp local_recipient_maps = regexp:/opt/mailman/core/var/data/postfix_lmtp relay_domains = regexp:/opt/mailman/core/var/data/postfix_domains unknown_local_recipient_reject_code = 550 owner_request_special = no propagate_unmatched_extensions = canonical, virtual, alias, forward, include Here is the line in postfix mail.log where the valid listname+token is rejected: NOQUEUE: reject: RCPT from mail-lf0-f43.google.com[209.85.215.43]: 550 5.1.1 < abcliste-confirm+79ecdc9fe57e086b8e1335299ef5255d156b72db(a)klubb.example.com>: Recipient address rejected: User unknown in local recipient table; from=< me(a)mydomain.com> to=< abcliste-confirm+79ecdc9fe57e086b8e1335299ef5255d156b72db(a)klubb.example.com> proto=ESMTP helo=<mail-lf0-f43.google.com> Any help will be appreciated. Thor

8 years

Re: Newbie question 2: Rewriting issue for bounced emails

by William Oliver

On Sat, 2021-12-25 at 13:34 -0800, Mark Sapiro wrote: > On 12/25/21 12:42 PM, William Oliver wrote: > > > > Is there a "make-the-freaking-virtual- map-database" command in > > mailman3, or is this postfix thing? Should I just touch the thing > > and > > create an empty file? I'm a little scared to... The error message > > makes me think that it should be populated with something... > > > Did you add an Alias Domain (different from the Mail Host domain) to > the > entry for your domain? This is what triggers the creation of > postfix_vmap. > Well, I hope youi had/have/will have a great holiday. I just finished our dinner and I am now amusing myself by pretending to enjoy the Hallmark movies my wife is watching and debugging my mailman3 installation when she's not looking. It was either "The twelve cats of Christmas" or "Die Hard." I put my foot down and said we were watching Die Hard. So of course we are watching a movie about 12 kittens in a fire truck. In any case, I added a line for "virtual_alias_domains" in my main.cf for postfix. But it doesn't do anything, apparently, except generate another error line (see the syslog output below). So, just for a lark, I created an empty /opt/mailman/mm/var/data/postfix_vmap file and ran postmap on it to create a postfix_vmap.db file. Now, it no longer complains about there not being a postfix_vmap.db file. Instead it complains about it being empty. Here's what my mailmanweb.log has to say: smtplib.SMTPRecipientsRefused: {'redacted(a)libertyfp.org': (550, b'5.1.1 <redacted(a)libertyfp.org>: Recipient address rejected: User unknown in virtual alias table')} I redacted the name because this is supposed to be the admin account -- and it fails on login. So, here's syslog: Dec 25 19:08:49 libertyfp postfix/smtpd[44664]: connect from localhost[::1] Dec 25 19:08:49 libertyfp postfix/trivial-rewrite[44670]: warning: do not list domain libertyfp.org in BOTH virtual_alias_domains and virtual_mailbox_domains Dec 25 19:08:49 libertyfp postfix/trivial-rewrite[44670]: warning: do not list domain libertyfp.org in BOTH virtual_alias_domains and virtual_mailbox_domains Dec 25 19:08:49 libertyfp postfix/smtpd[44664]: NOQUEUE: reject: RCPT from localhost[::1]: 550 5.1.1 <redacted(a)libertyfp.org>: Recipient address rejected: User unknown in virtual alias table; from=<redacted2(a)libertyfp.org> to=<redacted(a)libertyfp.org> proto=ESMTP helo=<mail.libertyfp.org> Dec 25 19:08:49 libertyfp postfix/smtpd[44672]: connect from localhost[::1] Dec 25 19:08:49 libertyfp postfix/trivial-rewrite[44670]: warning: do not list domain libertyfp.org in BOTH virtual_alias_domains and virtual_mailbox_domains Dec 25 19:08:49 libertyfp postfix/smtpd[44672]: NOQUEUE: reject: RCPT from localhost[::1]: 550 5.1.1 <redacted(a)libertyfp.org>: Recipient address rejected: User unknown in virtual alias table; from=<root(a)localhost.local> to=<redacted(a)libertyfp.org> proto=ESMTP helo=<mail.libertyfp.org> Dec 25 19:08:49 libertyfp postfix/smtpd[44672]: disconnect from localhost[::1] ehlo=1 auth=1 mail=1 rcpt=0/1 rset=1 quit=1 commands=5/6 where "redacted2" is the name in settings.py for EMAIL_HOST_USER and DEFAULT_FROM_EMAIL and "redacted" is the address for "Mailman Suite Admin" I don't know where "root(a)localhost.local" comes from. OK, it didn't work when I just had virtual_mailbox_domains defined, and it didn't work when I had both defined, so I commented out virtual_mailbox_domains and just left virtual_alias_domains. That didn't help, either, though it got rid of the warnings in syslog: Dec 25 19:43:33 libertyfp postfix/smtpd[55192]: connect from localhost[::1] Dec 25 19:43:33 libertyfp postfix/smtpd[55192]: NOQUEUE: reject: RCPT from localhost[::1]: 550 5.1.1 <redacted(a)libertyfp.org>: Recipient address rejected: User unknown in virtual alias table; from=<redacted2(a)libertyfp.org> to=<redacted(a)libertyfp.org> proto=ESMTP helo=<mail.libertyfp.org> Dec 25 19:43:34 libertyfp postfix/smtpd[55199]: connect from localhost[::1] Dec 25 19:43:34 libertyfp postfix/smtpd[55199]: NOQUEUE: reject: RCPT from localhost[::1]: 550 5.1.1 <redacted(a)libertyfp.org>: Recipient address rejected: User unknown in virtual alias table; from=<root(a)localhost.local> to=<reacted(a)libertyfp.org> proto=ESMTP helo=<mail.libertyfp.org> Dec 25 19:43:34 libertyfp postfix/smtpd[55199]: disconnect from localhost[::1] ehlo=1 auth=1 mail=1 rcpt=0/1 rset=1 quit=1 commands=5/6 Here's my postfix configuration: alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases always_add_missing_headers = yes command_directory = /usr/sbin compatibility_level = 2 daemon_directory = /usr/lib/postfix/sbin data_directory = /var/lib/postfix debugger_command = PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin ddd $daemon_directory/$process_name $process_id & sleep 5 default_destination_concurrency_limit = 15 default_destination_recipient_limit = 30 header_checks = regexp:/etc/postfix/header_checks home_mailbox = Maildir/ inet_interfaces = all inet_protocols = all local_recipient_maps = proxy:unix:passwd.byname $alias_maps hash:/opt/mailman/mm/var/data/postfix_lmtp mail_owner = postfix mailq_path = /usr/bin/mailq mydomain = libertyfp.org myhostname = mail.libertyfp.org mynetworks = 127.0.0.0/8 10.0.0.0/24 mynetworks_style = host myorigin = $mydomain newaliases_path = /usr/bin/newaliases owner_request_special = no relay_domains = hash:/opt/mailman/mm/var/data/postfix_domains sendmail_path = /usr/sbin/postfix smtp_tls_mandatory_protocols = !SSLv2, !SSLv3 smtpd_banner = $myhostname ESMTP smtpd_recipient_restrictions = permit_mynetworks, permit_auth_destination, permit_sasl_authenticated, reject smtpd_sasl_auth_enable = yes smtpd_sasl_local_domain = $myhostname smtpd_sasl_path = private/auth smtpd_sasl_security_options = noanonymous smtpd_sasl_type = dovecot smtpd_tls_cert_file = /etc/letsencrypt/live/libertyfp.org/fullchain.pem smtpd_tls_key_file = /etc/letsencrypt/live/libertyfp.org/privkey.pem smtpd_tls_mandatory_protocols = !SSLv2, !SSLv3 smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtpd_use_tls = yes transport_maps = hash:/opt/mailman/mm/var/data/postfix_lmtp unknown_local_recipient_reject_code = 550 virtual_alias_domains = libertyfp.org virtual_alias_maps = hash:/opt/mailman/mm/var/data/postfix_vmap virtual_gid_maps = static:20000 virtual_mailbox_base = /home/vmail virtual_mailbox_maps = hash:/etc/postfix/virtual-mailbox virtual_uid_maps = static:20000 Here's my settings.py: # Mailman Web configuration file. # /etc/mailman3/settings.py from mailman_web.settings.base import * from mailman_web.settings.mailman import * #: Default list of admins who receive the emails from error logging. ADMINS = ( ('Mailman Suite Admin', 'redacted2(a)libertyfp.org'), ) # Postgresql database setup. DATABASES = { 'default': { 'ENGINE': 'django.db.backends.postgresql_psycopg2', 'NAME': 'mailman', 'USER': 'mailman', # TODO: Replace this with the password. 'PASSWORD': 'passwd', 'HOST': 'localhost', 'PORT': '5432', } } # 'collectstatic' command will copy all the static files here. # Alias this location from your webserver to `/static` STATIC_ROOT = '/opt/mailman/web/static' # Make sure that this directory is created or Django will fail on start. LOGGING['handlers']['file']['filename'] = '/opt/mailman/web/logs/mailmanweb.log' #: See https://docs.djangoproject.com/en/dev/ref/settings/#allowed-hosts ALLOWED_HOSTS = [ "localhost", # Archiving API from Mailman, keep it. "www.libertyfp.org", "libertyfp.org", "mail.libertyfp.org", "list.libertyfp.org", "127.0.0.1", "2.56.57.28" # "lists.your-domain.org", # Add here all production domains you have. ] #: Current Django Site being served. This is used to customize the web host #: being used to serve the current website. For more details about Django #: site, see: https://docs.djangoproject.com/en/dev/ref/contrib/sites/ SITE_ID = 1 # Set this to a new secret value. SECRET_KEY = 'passwd' # Set this to match the api_key setting in # /opt/mailman/mm/mailman-hyperkitty.cfg (quoted here, not there). MAILMAN_ARCHIVER_KEY = 'passwd' HAYSTACK_CONNECTIONS = { 'default': { 'ENGINE': 'haystack.backends.whoosh_backend.WhooshEngine', 'PATH': os.path.join(BASE_DIR, "fulltext_index"), }, } # To be added to Django's settings.py EMAIL_BACKEND = 'django.core.mail.backends.smtp.EmailBackend' EMAIL_HOST = 'localhost' EMAIL_PORT = 25 EMAIL_HOST_USER = 'redacted(a)libertyfp.org' EMAIL_HOST_PASSWORD = 'passwd' DEFAULT_FROM_EMAIL = 'redacted2(a)libertyfp.org' SITE_ID = 2 Here's my mailman.cfg: /etc/mailman3/mailman.cfg [paths.here] var_dir: /opt/mailman/mm/var [mailman] layout: here # This address is the "site owner" address. Certain messages which must be # delivered to a human, but which can't be delivered to a list owner (e.g. a # bounce from a list owner), will be sent to this address. It should point to # a human. site_owner: redacted(a)libertyfp.org [database] class: mailman.database.postgresql.PostgreSQLDatabase url: postgres://redacted2:passwd@localhost/mailman [archiver.prototype] enable: yes # For the HyperKitty archiver. [archiver.hyperkitty] class: mailman_hyperkitty.Archiver enable: yes configuration: /opt/mailman/mm/mailman-hyperkitty.cfg # And, create the /opt/mailman/mm/mailman-hyperkitty.cfg file containing # these settings uncommented #[general] #base_url: http://127.0.0.1:8000/archives/ #api_key: Secret_Hyperkitty_API_Key [shell] history_file: $var_dir/history.py [shell] history_file: $var_dir/history.py [mta] verp_confirmations: yes verp_personalized_deliveries: yes verp_delivery_interval: 1 incoming: mailman.mta.postfix.LMTP outgoing: mailman.mta.deliver.deliver lmtp_host: mail.libertyfp.org lmtp_port: 8024 smtp_host: mail.libertyfp.org smtp_port: 25 configuration: python:mailman.config.postfix recipient_delimiter = + unknown_local_recipient_reject_code = 550 owner_request_special = no Here's uwsgi.ini # /etc/mailman3/uwsgi.ini # [uwsgi] # Port on which uwsgi will be listening. #http-socket = 127.0.0.1:8000 http-socket = 0.0.0.0:8000 # If running uwsgi from the virtual environment ... virtualenv = /opt/mailman/venv/ module=mailman_web.wsgi:application # Add to python import path. pythonpath = /etc/mailman3/ # The default settings module. env = DJANGO_SETTINGS_MODULE=settings # Setup default number of processes and threads per process. master = true processes = 2 threads = 2 # Setup the django_q related worker processes. attach-daemon = /opt/mailman/venv/bin/mailman-web qcluster # Setup the request log. req-logger = file:/opt/mailman/web/logs/uwsgi.log # Log qcluster commands separately. logger = qcluster file:/opt/mailman/web/logs/uwsgi-qcluster.log log-route = qcluster uwsgi-daemons # Last log and it logs the rest of the stuff. logger = file:/opt/mailman/web/logs/uwsgi-error.log And, last but not least here's mailman-hyperkitty.cfg: [general] base_url: http://127.0.0.1:8000/archives/ api_key: passwd

3 years, 9 months

Re: Held messages not delivered after approval

by Stephen J. Turnbull

Krinetzki, Stephan writes: > Now in the mailman.log I see the HOLD messages and the approved > messages. The smtp.log logs just the incoming Mail, which seems to > be fine. By that you mean the incoming mail is fine? Or smtp.log is fine? smtp.log should include two (or more) lines for each successful post, like Jan 02 16:09:17 2025 (42985) <43007@turnbull> smtp to list-1(a)turnbull.jp for 1 recips, completed in 0.6027507781982422 seconds Jan 02 16:09:17 2025 (42985) <43007@turnbull> post to list-1(a)turnbull.jp from list-1-owner(a)turnbull.jp, 992 bytes, 1 failures Jan 02 16:09:17 2025 (42985) <43007@turnbull> delivery to list-1-owner(a)turnbull.jp failed with code 550, b'5.1.1 <list-1-owner(a)turnbull.jp>: Recipient address rejected: User unknown in local recipient table' (That last line shows an example of a failure report.) > Aug 05 10:21:05 2025 (217986) Cannot connect to SMTP server localhost on port 25 Postfix for some reason doesn't know about the alias "localhost" (it has something to do with trusting the DNS and not reading the /etc/hosts file). 127.0.0.1 works. I don't understand how any lists' posts get delivered at all with that. If it's postfix it's possible that the connection pool is exhausted intermittently (but that wouldn't explain why it's consistently impossible to post to a subset of lists). You can specify that connections from the loopback interfaces are less restricted. That might help. > Even after changing the smtp_host in mailman.cfg this error appears > randomly. Note that > Sadly the mail does not get delivered. :-( -- GNU Mailman consultant (installation, migration, customization) Sirius Open Source https://www.siriusopensource.com/ Software systems consulting in Europe, North America, and Japan

2 months, 2 weeks

OK, so I backed out completely and re-installed. Here's my *original* error. Should I modify virtual mailbox maps?

by Bill Oliver

OK, I think I was clearly in the phase of dealing with errors caused by my attempts to deal with previous errors. So I backed out and did a clean install. Again, the installl seemed to go without a problem. Then: 1) I set up a mailinglist (tradfp(a)forensicpath.us) for "old school" forensic pathologists to discuss cases. 2) I added a couple of users: oliver(a)billoblog.com on the same box as the mailinglist, though on different virtual domains, and william.oliver(a)knoxcounty.org, a local government domain not associated with my box. Results: The welcome message did not get delivered to either address. When I send email from those addresses to tradfp(a)forensicpath.us, I get the following error from both: Your message couldn't be delivered The message you sent to tradfp(a)forensicpath.us couldn't be delivered due to: Recipient email address is possibly incorrect. Further information 5.1.1 <tradfp(a)forensicpath.us>: Recipient address rejected: User unknown in virtual mailbox table If you sent this message to multiple addresses, you'll receive a notification like this for every one that didn't arrive. That is when I started going down the dovecot rabbit hole. Here's the (what I think is relevant) part of the mail.cf file: virtual_mailbox_domains = proxy:mysql:/etc/postfix/sql/mysql_virtual_domains_maps.cf virtual_mailbox_maps = proxy:mysql:/etc/postfix/sql/mysql_virtual_mailbox_maps.cf, proxy:mysql:/etc/postfix/sql/mysql_virtual_alias_domain_mailbox_maps.cf virtual_alias_maps = proxy:mysql:/etc/postfix/sql/mysql_virtual_alias_maps.cf, proxy:mysql:/etc/postfix/sql/mysql_virtual_alias_domain_maps.cf, proxy:mysql:/etc/postfix/sql/mysql_virtual_alias_domain_catchall_maps.c f virtual_mailbox_base = /var/vmail virtual_minimum_uid = 900 virtual_uid_maps = static:900 virtual_gid_maps = static:900 transport_maps = hash:/opt/mailman/mm/var/data/postfix_lmtp local_recipient_maps = hash:/opt/mailman/mm/var/data/postfix_lmtp relay_domains = hash:/opt/mailman/mm/var/data/postfix_domains In my previous attempt, I added hash:/opt/mailman/mm/var/data/postfix_lmtp to both virtual_mailbox_maps and virtual_alias_maps, but I haven't done that yet here. I thought I'd ask and make sure I should. Should that be my next step? Thanks, billo

1 year

Re: integrating mm3 with postfix / lmtp

by Fabian A. Santiago

On October 25, 2017 9:17:33 PM EDT, "Fabian A. Santiago" <fsantiago(a)garbage-juice.com> wrote: >On October 25, 2017 9:13:20 PM EDT, Mark Sapiro <mark(a)msapiro.net> >wrote: >>On 10/25/2017 05:41 PM, Fabian A. Santiago wrote: >>> >>> No to the domains part and I think virtual alias maps is needed: >>> >>> mail postfix/trivial-rewrite[19445]: warning: do not list domain xxx >>in BOTH virtual_mailbox_domains and relay_domains >>> Oct 25 20:39:19 mail postfix/trivial-rewrite[19445]: warning: do not >>list domain xxx in BOTH virtual_mailbox_domains and relay_domains >>> Oct 25 20:39:19 mail postfix/submission/smtpd[19441]: NOQUEUE: >>reject: RCPT from >>pool-108-53-239-102.nwrknj.fios.verizon.net[108.53.239.102]: 550 5.1.1 >><test123@xxx>: Recipient address rejected: User unknown in virtual >>mailbox table; from=<fsantiago@xxx> to=<test123@xxx> proto=ESMTP >>helo=<[10.0.0.29]> >> >>(above slightly sanitized for return to the list) >> >>The issue here is your list domain cannot be a virtual_mailbox_domain >>or >>a virtual_alias_domain. >> >>I have the same issue on mail.python.org where we have both Mailman 2 >>and Mailman 3 lists @python.org. and python.org is a >>virtual_alias_domain. >> >>I have a group of MRs for a branch that implements "alias_domains" to >>deal with this. >> >>Basically it works by creating another (virtual_alias_maps) >>postfix_vmap >>mapping to map list addresses @python.org to addresses @x.python.org. >>Then the postfix_domains and postfix_lmtp maps have the x.python.org >>domain and there is a patch to mailman/runners/lmtp.py to map the >>x.python.org domain back to python.org. >> >>The various MRs are >><https://gitlab.com/mailman/mailman/merge_requests/202> for the core, >><https://gitlab.com/mailman/mailmanclient/merge_requests/18> for the >>REST bindings used by Postorius and >><https://gitlab.com/mailman/postorius/merge_requests/186> to be able >to >>set an alias_domain via Postorius. >> >>That's not all implemented at mail.python.org. What's there is the >>basic >>Postfix config, a bash script the generate the new mappings from the >>old >>and a simple patch to mailman/runners/lmtp.py. >> >>So, the bottom line is it can be done and it's in process, but it >won't >>really be supported until Mailman 3.2. In the mean time, you just need >>to have a separate domain for your lists that isn't a >virtual_*_domain. > >Ok thanks. At least I have a clear answer now. Any ETA on 3.2 in mind >yet? >-- > >Thanks, > >Fabian S. > >OpenPGP: 3C3FA072ACCB7AC5DB0F723455502B0EEB9070FC >_______________________________________________ >Mailman-users mailing list >mailman-users(a)mailman3.org >https://lists.mailman3.org/mailman3/lists/mailman-users.mailman3.org/ Mark, Ok I have it almost perfectly working now having taken your direction and configuring a unique domain not in my email system already. But in my testing, I replied to a subscription confirmation message and received back an undeliverable looping email error message from postfix. Any clues there you can offer? I can post to the list from any email added via the admin console. The test subscriber address was local to my server. From an outside address, same error. Once I registered the new email domain, I reverted my postfix config back to the default suggested by maxking's docker instructions. https://github.com/maxking/docker-mailman Thanks. -- Thanks, Fabian S. OpenPGP: 3C3FA072ACCB7AC5DB0F723455502B0EEB9070FC

7 years, 11 months

I have issue where it does not send emails on to people in the list I create.

by john_warland＠hotmail.com

Hello, I am quite new to Mailman3 and have been trying to get a working local test setup on a single VM (Centos07) I have issue where if I send an email to the list. it does not send emails on to the people subscribed to that list. Note the steps below were put together from memory after a few days of repeatably trying different things so there will be some inaccuracies I have mailman running on same local box as postfix, postorius and hyperkitty. I have root as the superuser in Postorius and have tried the following: In unix shell created new user 'developer' In unix shell created new user 'tester' In shell send an email from developer user to tester: echo 'Hello' | mailx -s 'Hello Subject line' tester(a)sandbox.mytest.com Confirmed user tester received email in cat /home/tester/Maildir/new/ folder: Return-Path: <developer(a)cloud7.sandbox.mytest.com> X-Original-To: tester(a)cloud7.sandbox.mytest.com Delivered-To: tester(a)cloud7.sandbox.mytest.com Received: by cloud7.sandbox.mytest.com (Postfix, from userid 1000) In Postorius web frontend: Signed up as root Received confirmation email in /root/Maildir/new/ folder so cut and pasted the Url in the email to activate account. Created new list called testlist(a)sandbox.mytest.com Logged out Signed up as tester Received confirmation email in /home/tester/Maildir/new/ folder so cut and pasted the Url to activate account. Subscribed tester to the testlist. Next in unix shell su as developer and send an email to testlist(a)sandbox.mytest.com The root user gets the following email Content-Transfer-Encoding: 7bit Subject: Your message to testlist(a)cloud7.sandbox.mytest.com awaits moderator approval From: testlist-bounces(a)cloud7.sandbox.mytest.com To: developer(a)cloud7.sandbox.mytest.com Message-ID: <158824480291.3035.17408340520496115243(a)localhost.localdomain> Date: Thu, 30 Apr 2020 11:06:42 +0000 Precedence: bulk X-Mailman-Version: 3.3.0 Your mail to 'testlist(a)cloud7.sandbox.mytest.com' with the subject hello there 2 Is being held until the list moderator can review it for approval. The message is being held because: The message is not from a list member Either the message will get posted to the list, or you will receive notification of the moderator's decision. Once I have gone back into Postorius as root and approved the message, root user gets a second email: Return-Path: <testlist-bounces(a)cloud7.sandbox.mytest.com> X-Original-To: root(a)cloud7.sandbox.mytest.com Delivered-To: root(a)cloud7.sandbox.mytest.com Received: from localhost.localdomain (localhost [IPv6:::1]) by cloud7.sandbox.mytest.com (Postfix) with ESMTP id E056A84CE4 for <root(a)cloud7.sandbox.mytest.com>; Thu, 30 Apr 2020 11:09:10 +0000 (UTC) Received: by cloud7.sandbox.mytest.com (Postfix, from userid 1000) id 8F1B684CE4; Thu, 30 Apr 2020 11:06:41 +0000 (UTC) Date: Thu, 30 Apr 2020 11:06:41 +0000 To: testlist(a)cloud7.sandbox.mytest.com User-Agent: Heirloom mailx 12.5 7/5/10 MIME-Version: 1.0 Message-Id: <20200430110641.8F1B684CE4(a)sandbox.mytest.com> From: developer(a)cloud7.sandbox.mytest.com X-MailFrom: developer(a)cloud7.sandbox.mytest.com X-Mailman-Rule-Hits: nonmember-moderation X-Mailman-Rule-Misses: dmarc-mitigation; no-senders; approved; emergency; loop; banned-address; member-moderation Message-ID-Hash: FAPTJKJRZG2ELSOSBRBIDOBWXP3Y5QAY X-Message-ID-Hash: FAPTJKJRZG2ELSOSBRBIDOBWXP3Y5QAY X-Mailman-Approved-At: Thu, 30 Apr 2020 11:09:10 +0000 X-Mailman-Version: 3.3.0 Precedence: list Subject: [Testlist] hello there 2 List-Id: A test list <testlist.sandbox.mytest.com> List-Help: <mailto:testlist-request@sandbox.mytest.com?subject=help> List-Post: <mailto:testlist@sandbox.mytest.com> List-Subscribe: <mailto:testlist-join@sandbox.mytest.com> List-Unsubscribe: <mailto:testlist-leave@sandbox.mytest.com> Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit A test email 2 _______________________________________________ Testlist mailing list -- testlist(a)sandbox.mytest.com To unsubscribe send an email to testlist-leave(a)sandbox.mytest.com At no point does the email appear in the tester(a)sandbox.mytest.com Maildir Configs as follows.. ================================================================================================== /etc/postfix/main.cf: ================================================================================================== queue_directory = /var/spool/postfix command_directory = /usr/sbin daemon_directory = /usr/libexec/postfix data_directory = /var/lib/postfix mail_owner = postfix myhostname = cloud7.sandbox.mytest.com mydomain = sandbox.mytest.com myorigin = $mydomain inet_interfaces = all inet_protocols = all mydestination = $myhostname, localhost.$mydomain, localhost, mail.$mydomain, www.$mydomain, ftp.$mydomain, sandbox.mytest.com unknown_local_recipient_reject_code = 550 # Next line Obfuscated mynetworks = 192.***.***.0/24, 127.0.0.0/8 alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases recipient_delimiter = + home_mailbox = Maildir/ debug_peer_level = 2 debug_peer_list = sandbox.mytest.com debugger_command = PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin ddd $daemon_directory/$process_name $process_id & sleep 5 sendmail_path = /usr/sbin/sendmail.postfix newaliases_path = /usr/bin/newaliases.postfix mailq_path = /usr/bin/mailq.postfix setgid_group = postdrop html_directory = no manpage_directory = /usr/share/man sample_directory = /usr/share/doc/postfix-2.10.1/samples readme_directory = /usr/share/doc/postfix-2.10.1/README_FILES disable_dns_lookups = yes owner_request_special = no transport_maps = hash:/var/lib/mailman/data/postfix_lmtp # Setting to nothing fixes 'Recepient address rejected: User unknown in local recipient table local_recipient_maps = relay_domains = hash:/var/lib/mailman/data/postfix_domains ================================================================================================== /etc/mailman.cfg ================================================================================================== [devmode] enabled: yes recipient: root(a)sandbox.mytest.com [mailman] # local = Recommended as installing mailman from source. Folder structure in /var/tmp/mailman # fhs = /var/bin, /var/log, etc.. layout: fhs [logging.database] level: info [mta] # This config is for when mailman and the MTA (Postfix) are on the same host incoming: mailman.mta.postfix.LMTP outgoing: mailman.mta.deliver.deliver lmtp_host: 127.0.0.1 lmtp_port: 8024 smtp_host: localhost smtp_port: 25 configuration: python:mailman.config.postfix [webservice] hostname: localhost port: 8001 use_https: no admin_user: restadmin admin_pass: restpass api_version: 3.1 ================================================================================================== /etc/mailman-suite-1.0.0/mailman-suite_project/settings.py ================================================================================================== In this file the main changes were: DEBUG=True SERVER_EMAIL = 'root(a)localhost.local' EMAIL_BACKEND = 'django.core.mail.backends.smtp.EmailBackend' Commented out three lines of code: # if DEBUG == True: # EMAIL_BACKEND = 'django.core.mail.backends.filebased.EmailBackend' # EMAIL_FILE_PATH = os.path.join(BASE_DIR, 'emails') Complete file: """ Django Settings for Mailman Suite (hyperkitty + postorius) For more information on this file, see https://docs.djangoproject.com/en/1.8/topics/settings/ For the full list of settings and their values, see https://docs.djangoproject.com/en/1.8/ref/settings/ """ # Build paths inside the project like this: os.path.join(BASE_DIR, ...) import os BASE_DIR = os.path.dirname(os.path.abspath(__file__)) # SECURITY WARNING: keep the secret key used in production secret! SECRET_KEY = 'change-this-on-your-production-server' # SECURITY WARNING: don't run with debug turned on in production! # Have to keep it True atm as the css styles screw up when set to False DEBUG = True ADMINS = ( ('Mailman Suite Admin', 'root@localhost'), ) SITE_ID = 1 # Hosts/domain names that are valid for this site; required if DEBUG is False # See https://docs.djangoproject.com/en/1.8/ref/settings/#allowed-hosts ALLOWED_HOSTS = [ "localhost", # Archiving API from Mailman, keep it. "MAILMAN_SERVER_ADDRESS", <--- I inject IP Address here # Add here all production URLs you may have. ] # Mailman API credentials MAILMAN_REST_API_URL = 'http://localhost:8001' MAILMAN_REST_API_USER = 'restadmin' MAILMAN_REST_API_PASS = 'restpass' MAILMAN_ARCHIVER_KEY = 'SecretArchiverAPIKey' MAILMAN_ARCHIVER_FROM = ('127.0.0.1', '::1') # Application definition INSTALLED_APPS = ( 'hyperkitty', 'postorius', 'django_mailman3', # Uncomment the next line to enable the admin: 'django.contrib.admin', # Uncomment the next line to enable admin documentation: # 'django.contrib.admindocs', 'django.contrib.auth', 'django.contrib.contenttypes', 'django.contrib.sessions', 'django.contrib.sites', 'django.contrib.messages', 'django.contrib.staticfiles', 'rest_framework', 'django_gravatar', 'compressor', 'haystack', 'django_extensions', 'django_q', 'allauth', 'allauth.account', 'allauth.socialaccount', 'django_mailman3.lib.auth.fedora', 'allauth.socialaccount.providers.openid', 'allauth.socialaccount.providers.github', 'allauth.socialaccount.providers.gitlab', 'allauth.socialaccount.providers.google', # 'allauth.socialaccount.providers.facebook', 'allauth.socialaccount.providers.twitter', 'allauth.socialaccount.providers.stackexchange', ) MIDDLEWARE = ( 'django.contrib.sessions.middleware.SessionMiddleware', 'django.middleware.common.CommonMiddleware', 'django.middleware.csrf.CsrfViewMiddleware', 'django.middleware.locale.LocaleMiddleware', 'django.contrib.auth.middleware.AuthenticationMiddleware', 'django.contrib.messages.middleware.MessageMiddleware', 'django.middleware.clickjacking.XFrameOptionsMiddleware', 'django.middleware.security.SecurityMiddleware', 'django_mailman3.middleware.TimezoneMiddleware', 'postorius.middleware.PostoriusMiddleware', ) ROOT_URLCONF = 'urls' TEMPLATES = [ { 'BACKEND': 'django.template.backends.django.DjangoTemplates', 'DIRS': [], 'APP_DIRS': True, 'OPTIONS': { 'context_processors': [ 'django.template.context_processors.debug', 'django.template.context_processors.i18n', 'django.template.context_processors.media', 'django.template.context_processors.static', 'django.template.context_processors.tz', 'django.template.context_processors.csrf', 'django.template.context_processors.request', 'django.contrib.auth.context_processors.auth', 'django.contrib.messages.context_processors.messages', 'django_mailman3.context_processors.common', 'hyperkitty.context_processors.common', 'postorius.context_processors.postorius', ], }, }, ] WSGI_APPLICATION = 'wsgi.application' # Database # https://docs.djangoproject.com/en/1.8/ref/settings/#databases DATABASES = { 'default': { # Use 'sqlite3', 'postgresql_psycopg2', 'mysql', 'sqlite3' or 'oracle'. 'ENGINE': 'django.db.backends.sqlite3', # DB name or path to database file if using sqlite3. 'NAME': os.path.join(BASE_DIR, 'mailmansuite.db'), # The following settings are not used with sqlite3: 'USER': 'mailmansuite', 'PASSWORD': 'mmpass', # HOST: empty for localhost through domain sockets or '127.0.0.1' for # localhost through TCP. 'HOST': '', # PORT: set to empty string for default. 'PORT': '', } # Example for PostgreSQL (recommanded for production): #'default': { # 'ENGINE': 'django.db.backends.postgresql_psycopg2', # 'NAME': 'database_name', # 'USER': 'database_user', # 'PASSWORD': 'database_password', # 'HOST': 'localhost', #} } # If you're behind a proxy, use the X-Forwarded-Host header # See https://docs.djangoproject.com/en/1.8/ref/settings/#use-x-forwarded-host # USE_X_FORWARDED_HOST = True # And if your proxy does your SSL encoding for you, set SECURE_PROXY_SSL_HEADER # https://docs.djangoproject.com/en/1.8/ref/settings/#secure-proxy-ssl-header # SECURE_PROXY_SSL_HEADER = ('HTTP_X_FORWARDED_PROTO', 'https') # SECURE_PROXY_SSL_HEADER = ('HTTP_X_FORWARDED_SCHEME', 'https') # Other security settings # SECURE_SSL_REDIRECT = True # If you set SECURE_SSL_REDIRECT to True, make sure the SECURE_REDIRECT_EXEMPT # contains at least this line: # SECURE_REDIRECT_EXEMPT = [ # "archives/api/mailman/.*", # Request from Mailman. # ] # SESSION_COOKIE_SECURE = True # SECURE_CONTENT_TYPE_NOSNIFF = True # SECURE_BROWSER_XSS_FILTER = True # CSRF_COOKIE_SECURE = True # CSRF_COOKIE_HTTPONLY = True # X_FRAME_OPTIONS = 'DENY' # Password validation # https://docs.djangoproject.com/en/1.9/ref/settings/#auth-password-validators AUTH_PASSWORD_VALIDATORS = [ { 'NAME': 'django.contrib.auth.password_validation.UserAttributeSimilarityValidator', }, { 'NAME': 'django.contrib.auth.password_validation.MinimumLengthValidator', }, { 'NAME': 'django.contrib.auth.password_validation.CommonPasswordValidator', }, { 'NAME': 'django.contrib.auth.password_validation.NumericPasswordValidator', }, ] # Internationalization # https://docs.djangoproject.com/en/1.8/topics/i18n/ LANGUAGE_CODE = 'en-us' TIME_ZONE = 'UTC' USE_I18N = True USE_L10N = True USE_TZ = True # Static files (CSS, JavaScript, Images) # https://docs.djangoproject.com/en/1.8/howto/static-files/ # Absolute path to the directory static files should be collected to. # Don't put anything in this directory yourself; store your static files # in apps' "static/" subdirectories and in STATICFILES_DIRS. # Example: "/var/www/example.com/static/" STATIC_ROOT = os.path.join(BASE_DIR, 'static') # URL prefix for static files. # Example: "http://example.com/static/", "http://static.example.com/" STATIC_URL = '/static/' # Additional locations of static files STATICFILES_DIRS = ( # Put strings here, like "/home/html/static" or "C:/www/django/static". # Always use forward slashes, even on Windows. # Don't forget to use absolute paths, not relative paths. # BASE_DIR + '/static/', ) # List of finder classes that know how to find static files in # various locations. STATICFILES_FINDERS = ( 'django.contrib.staticfiles.finders.FileSystemFinder', 'django.contrib.staticfiles.finders.AppDirectoriesFinder', # 'django.contrib.staticfiles.finders.DefaultStorageFinder', 'compressor.finders.CompressorFinder', ) # Django 1.6+ defaults to a JSON serializer, but it won't work with # django-openid, see # https://bugs.launchpad.net/django-openid-auth/+bug/1252826 SESSION_SERIALIZER = 'django.contrib.sessions.serializers.PickleSerializer' LOGIN_URL = 'account_login' LOGIN_REDIRECT_URL = 'list_index' LOGOUT_URL = 'account_logout' # If you enable internal authentication, this is the address that the emails # will appear to be coming from. Make sure you set a valid domain name, # otherwise the emails may get rejected. # https://docs.djangoproject.com/en/1.8/ref/settings/#default-from-email # DEFAULT_FROM_EMAIL = "mailing-lists(a)you-domain.org" DEFAULT_FROM_EMAIL = 'postorius(a)localhost.local' # If you enable email reporting for error messages, this is where those emails # will appear to be coming from. Make sure you set a valid domain name, # otherwise the emails may get rejected. # https://docs.djangoproject.com/en/1.8/ref/settings/#std:setting-SERVER_EMAIL # SERVER_EMAIL = 'root(a)your-domain.org' SERVER_EMAIL = 'root(a)localhost.local' EMAIL_BACKEND = 'django.core.mail.backends.smtp.EmailBackend' # Compatibility with Bootstrap 3 from django.contrib.messages import constants as messages # flake8: noqa MESSAGE_TAGS = { messages.ERROR: 'danger' } # # Social auth # AUTHENTICATION_BACKENDS = ( 'django.contrib.auth.backends.ModelBackend', 'allauth.account.auth_backends.AuthenticationBackend', ) # Django Allauth ACCOUNT_AUTHENTICATION_METHOD = "username_email" ACCOUNT_EMAIL_REQUIRED = True ACCOUNT_EMAIL_VERIFICATION = "mandatory" # You probably want https in production, but this is a dev setup file ACCOUNT_DEFAULT_HTTP_PROTOCOL = "http" ACCOUNT_UNIQUE_EMAIL = True SOCIALACCOUNT_PROVIDERS = { 'openid': { 'SERVERS': [ dict(id='yahoo', name='Yahoo', openid_url='http://me.yahoo.com'), ], }, 'google': { 'SCOPE': ['profile', 'email'], 'AUTH_PARAMS': {'access_type': 'online'}, }, 'facebook': { 'METHOD': 'oauth2', 'SCOPE': ['email'], 'FIELDS': [ 'email', 'name', 'first_name', 'last_name', 'locale', 'timezone', ], 'VERSION': 'v2.4', }, } # # Gravatar # https://github.com/twaddington/django-gravatar # # Gravatar base url. # GRAVATAR_URL = 'http://cdn.libravatar.org/' # Gravatar base secure https url. # GRAVATAR_SECURE_URL = 'https://seccdn.libravatar.org/' # Gravatar size in pixels. # GRAVATAR_DEFAULT_SIZE = '80' # An image url or one of the following: 'mm', 'identicon', 'monsterid', # 'wavatar', 'retro'. # GRAVATAR_DEFAULT_IMAGE = 'mm' # One of the following: 'g', 'pg', 'r', 'x'. # GRAVATAR_DEFAULT_RATING = 'g' # True to use https by default, False for plain http. # GRAVATAR_DEFAULT_SECURE = True # # django-compressor # https://pypi.python.org/pypi/django_compressor # COMPRESS_PRECOMPILERS = ( ('text/less', 'lessc {infile} {outfile}'), ('text/x-scss', 'sass -t compressed {infile} {outfile}'), ('text/x-sass', 'sass -t compressed {infile} {outfile}'), ) # On a production setup, setting COMPRESS_OFFLINE to True will bring a # significant performance improvement, as CSS files will not need to be # recompiled on each requests. It means running an additional "compress" # management command after each code upgrade. # http://django-compressor.readthedocs.io/en/latest/usage/#offline-compression # COMPRESS_OFFLINE = True # Needed for debug mode # INTERNAL_IPS = ('127.0.0.1',) # # Full-text search engine # HAYSTACK_CONNECTIONS = { 'default': { 'ENGINE': 'haystack.backends.whoosh_backend.WhooshEngine', 'PATH': os.path.join(BASE_DIR, "fulltext_index"), # You can also use the Xapian engine, it's faster and more accurate, # but requires another library. # http://django-haystack.readthedocs.io/en/v2.4.1/installing_search_engines.h… # Example configuration for Xapian: #'ENGINE': 'xapian_backend.XapianEngine' }, } # # Asynchronous tasks # Q_CLUSTER = { 'timeout': 300, 'save_limit': 100, 'orm': 'default', } # A sample logging configuration. The only tangible logging # performed by this configuration is to send an email to # the site admins on every HTTP 500 error when DEBUG=False. # See http://docs.djangoproject.com/en/dev/topics/logging for # more details on how to customize your logging configuration. LOGGING = { 'version': 1, 'disable_existing_loggers': False, 'filters': { 'require_debug_false': { '()': 'django.utils.log.RequireDebugFalse' } }, 'handlers': { 'mail_admins': { #'level': 'ERROR', 'level': 'INFO', 'filters': ['require_debug_false'], 'class': 'django.utils.log.AdminEmailHandler' }, 'file':{ #'level': 'ERROR', 'level': 'INFO', #'class': 'logging.handlers.RotatingFileHandler', 'class': 'logging.handlers.WatchedFileHandler', 'filename': os.path.join(BASE_DIR, 'logs', 'mailmansuite.log'), 'formatter': 'verbose', }, 'console': { 'class': 'logging.StreamHandler', 'formatter': 'simple', }, }, 'loggers': { 'django.request': { 'handlers': ['mail_admins', 'file'], #'level': 'ERROR', 'level': 'INFO', 'propagate': True, }, 'django': { 'handlers': ['file'], #'level': 'ERROR', 'level': 'INFO', 'propagate': True, }, 'hyperkitty': { 'handlers': ['file'], #'level': 'DEBUG', 'level': 'INFO', 'propagate': True, }, 'postorius': { 'handlers': ['console', 'file'], #'level': 'ERROR', 'level': 'INFO', }, }, 'formatters': { 'verbose': { 'format': '%(levelname)s %(asctime)s %(process)d %(name)s %(message)s' }, 'simple': { 'format': '%(levelname)s %(message)s' }, }, 'root': { 'handlers': ['file'], #'level': 'ERROR', 'level': 'INFO', }, } # Using the cache infrastructure can significantly improve performance on a # production setup. This is an example with a local Memcached server. #CACHES = { # 'default': { # 'BACKEND': 'django.core.cache.backends.memcached.PyLibMCCache', # 'LOCATION': '127.0.0.1:11211', # } #} # When DEBUG is True, don't actually send emails to the SMTP server, just store # them in a directory. This way you won't accidentally spam your mailing-lists # while you're fiddling with the code. # Kept DEBUG=True as it breaks css styling when set to False so commented out this code as temp fix. #if DEBUG == True: # EMAIL_BACKEND = 'django.core.mail.backends.filebased.EmailBackend' # EMAIL_FILE_PATH = os.path.join(BASE_DIR, 'emails') # # HyperKitty-specific # # Only display mailing-lists from the same virtual host as the webserver FILTER_VHOST = False POSTORIUS_TEMPLATE_BASE_URL = 'http://localhost:8000' try: from settings_local import * except ImportError: pass

5 years, 5 months

Mailman-users search results for query "user unknown in local recipient table"