December 2020 - Mailman-users - lists.mailman3.org

Mailman automatic accept notification
by tambet.paide＠mkm.ee 16 Dec '20

16 Dec '20

How can I configure mailman so that all the users in mailing list won't get automatic accept notification (uncaught bounce notification)? I'n mailman configure I cant find nothing about disabling bounce message. I'm using Mailman 3 and cat figure it out

4 8

Handling of (un)subscribe mails for already (un)subscribed users
by Andreas Barth 15 Dec '20

15 Dec '20

Hi, I noticed that a mail to -subscribe for an already subscribed user doesn't get any response (about line 225 in mailman/src/mailman/app/subscriptions.py). Same but different for unsubscribe for users not on the list. I'd need these kind of mails however in hope that users complain less. Would that be generally interessting, and if so, any special requirements for submitting patches, or should I just do that locally? Regards, Andi

3 7

Equivalent Apache2 Directives for Those From the Docker Nginx Documentation?
by James Bowery 15 Dec '20

15 Dec '20

The Docker documentation at: https://asynchronous.in/docker-mailman/#dependencies I've installed and enabled proxy_uwsgi for Apache and made a rough cut at a configuration for the lists.* subdomain in question but it's failing. What follows are the document's Nginx directives for which I would greatly appreciate the Apache2 equivalents. I'm attempting to move a mailing list off of Yahoo groups onto my hosted server using an Apache2's virtual host on the 'lists' subdomain: Setting up your web server: # Nginx configuration. location / { # First attempt to serve request as file, then proxy_pass http://172.19.199.3:8000; include uwsgi_params; uwsgi_read_timeout 300; proxy_set_header Host $host; proxy_set_header X-Forwarded-For $remote_addr; } uwsgi: # Nginx configuration. location / { # First attempt to serve request as file, then uwsgi_pass 172.19.199.3:8080; include uwsgi_params; uwsgi_read_timeout 300; }

2 1

Data too long for column 'data' in workflowstate
by Morris Jones 14 Dec '20

14 Dec '20

I ran into this error attempting to add a user to a mailing list: (pymysql.err.DataError) (1406, "Data too long for column 'data' at row 1") [SQL: INSERT INTO workflowstate (token, step, data) VALUES (%(token)s, %(step)s, %(data)s)] [parameters: {'token': '7394fbf654b3faffc6a65eb95e0616eea6651b9e', 'step': 'do_confirm_verify', 'data': '{"pre_approved": false, "pre_confirmed": false, "pre_verified": false, "invitation": false, "address_key": "dorothyxxxxxxxx(a)gmail.com", "subscriber_key": 1, "user_key": "00201c01dcc443c3a0d8f6d1ea42e230", "token_owner_key": 1, "send_welcome_message": null}'}] In MySQL I see that column 'data' in workflowstate is VARCHAR(255), and the data in the query is 259 characters. If I have a moment I'll write a bug or patch ... but I'm not really current on schema migrations. Mojo -- Morris Jones, Monrovia, CA BridgeMojo <http://bridgemojo.com> Old Town Sidewalk Astronomers <http://otastro.org> Mojo's Blog <http://mojo.whiteoaks.com>

2 2

Permission denied for /list:member:digest:header.txt
by Eric Broens 14 Dec '20

14 Dec '20

Hi, despite mailman is running as mailman user and the required periodic jobs have all been created in crontab for the mailman user, a permission denied exception for the digest file has been logged in mailman.log: Dec 14 11:31:42 2020 (399913) Uncaught runner exception: [Errno 13] Permission denied: '/var/lib/mailman3/templates/lists/...//list:member:digest:header.txt' The subdirectories and files of the templates subdirectory got the root owner and group: drwxr-xr-x. 3 mailman mailman 4096 Dec 12 17:58 templates drwxr-xr-x. 11 root root 4096 Dec 12 19:20 lists -rw-rw----. 1 root root 16 Dec 12 19:19 list:member:digest:header.txt How can this be avoided? Best Regards,Eric

3 8

Importing config and archives only partially succeeded?
by Eric Broens 13 Dec '20

13 Dec '20

Today I have migrated about 30 mailinglists from mailman 2.1 to mailman 3.3.2 & Hyperkitty 1.3.3. Although no error responses were given when importing the 2.1 pck files, and neither for importing the archives, for about half of the mailinglists the hyperkitty webpage doesn't show any subscribers, nor archived emails. The imported members and other settings are correctly shown in the postorius page. Is there anything that I can verify why the archive is not shown on the hyperkitty page?The hyperkitty_email database table does contain the emails. Thanks in advance,Eric

2 11

troubleshooting hyperkitty
by Morris Jones 10 Dec '20

10 Dec '20

Working on a new installation -- lists seem to be working in terms of distributing postings. But none of the postings are appearing in an archive yet. I created a mailman-hyperkitty.cfg file in /opt/mailman/var/etc/. It has a base_url for the "hyperkitty installation," and I'm not sure where that's supposed to be. The comment says "This address will be used by Mailman to forward incoming emails to Hyperkitty for archiving." I set base_url to http://mailman.whiteoaks.com/hyperkitty (changing "localhost" from the example). It redirects to https:, I set new secret keys here and in mailman.cfg. No new posts appear, and nothing archive related shows up in mailman's log. The mailman qcluster is running. The runner=archive job is running. Can someone suggest a troubleshooting strategy? Best regards, Mojo -- Morris Jones, Monrovia, CA BridgeMojo <http://bridgemojo.com> Old Town Sidewalk Astronomers <http://otastro.org> Mojo's Blog <http://mojo.whiteoaks.com>

3 10

Hyperkitty Recommended mySQL Database Setup & Archive Importing
by matthew＠alberti.us 10 Dec '20

10 Dec '20

Hi, I've been working for quite a while to setup a production mailman3. Using the docker containers, I have been pretty successful getting it to work. Part of the challenge now is that there are a lot of issues when importing archives from mailman2. This of course is more common on lists that are over 10 years old. From what I've been reading, it seems like Mailman3 expects the mysql database to use UTF8 encoding. It appears, by default, that when using the docker-mailman containers, that the character set is set to latin1. This may explain why there are lots of import errors, and maybe also why there are a lot of errors when threads are deleted in hyperkitty's UI. Is it the case that UTF8 is the preferred character set? I also saw some threads indicating that maybe utf8mb4 is more preferred. I'd like to try to change the character_set on the database, if that is advisable. Also, is Hyperkitty 1.3.4 officially released? I see that the list.org instance is using it, but the latest announce I've seen is for 1.3.3. Thanks. - Matt Alberti

3 8

Version mismatch
by Andrew Bernard 09 Dec '20

09 Dec '20

In the annoucement mail, the new version is - Mailman Core 3.3.0 (Tom Swayer) but on my webpage I see: Mailman Core Version GNU Mailman 3.3.0 (La Villa Strangiato) Mailman Core API Version 3.0 Mailman Core Python Version 3.7.3 (default, Apr 3 2019, 05:39:12) [GCC 8.3.0] Why is the version name from the previous release? is my setup wrong? [There are so many issues I keep reporting here about Mailman that get no response that I wonder if there is something fundamentally wrong with my site.] Andrew

4 3

Message moderatin without login
by Michael Lorenzen 08 Dec '20

08 Dec '20

Hi, are there any plans to allow message moderation without having to login to posterious? I am very pleased with the new web interface and the rest api, but i miss the ability to moderate messages either by mail, with different reply addresses to discard, reject or accept hold messages or by html links with one time codes to achieve the same. I tried to reply on the mail attachment with the confirm ... subject, but that did not seem to work (neither reject nor accept with approved: placed into the first line of the mail). Best regards, Michael

2 1